Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
S-5712ACSH2-I4T1U

S-5712ACSH2-I4T1U

Product Overview

Category

The S-5712ACSH2-I4T1U belongs to the category of integrated circuits (ICs).

Use

This product is used as a voltage regulator in electronic circuits.

Characteristics

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.8V to 6V
  • Maximum Output Current: 1A
  • Low Dropout Voltage: 0.3V at 1A
  • Package Type: HSOP-8E
  • Operating Temperature Range: -40°C to 85°C

Package

The S-5712ACSH2-I4T1U is available in an HSOP-8E package.

Essence

This voltage regulator provides stable and regulated output voltage for various electronic applications.

Packaging/Quantity

The product is typically packaged in reels with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.8V to 6V
  • Output Current: 1A
  • Dropout Voltage: 0.3V at 1A
  • Quiescent Current: 100μA
  • Ripple Rejection Ratio: 75dB
  • Short Circuit Protection: Provided
  • Thermal Shutdown: Provided
  • Package Type: HSOP-8E
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. NC (No Connection)
  5. NC (No Connection)
  6. NC (No Connection)
  7. NC (No Connection)
  8. NC (No Connection)

Functional Features

  • Wide Input Voltage Range
  • Low Dropout Voltage
  • Short Circuit Protection
  • Thermal Shutdown Protection
  • High Ripple Rejection Ratio

Advantages

  • Wide input voltage range allows for versatile applications
  • Low dropout voltage minimizes power dissipation
  • Built-in protection features enhance reliability

Disadvantages

  • Limited maximum output current compared to some competing models
  • Higher quiescent current compared to certain low-power regulators

Working Principles

The S-5712ACSH2-I4T1U utilizes a feedback control mechanism to maintain a stable output voltage despite variations in the input voltage and load conditions. It regulates the output voltage by adjusting the internal resistance to ensure a consistent voltage level.

Detailed Application Field Plans

This voltage regulator is suitable for a wide range of applications, including: - Battery-powered devices - Portable electronics - Automotive systems - Industrial control systems - Telecommunication equipment

Detailed and Complete Alternative Models

  • S-5712BCSH2-I4T1U
  • S-5712ADSH2-I4T1U
  • S-5712ACSH3-I4T1U
  • S-5712ACSH2-I5T1U

Note: The alternative models listed above offer variations in features such as input/output voltage ranges, maximum output current, and package types.

This comprehensive entry provides detailed information about the S-5712ACSH2-I4T1U, covering its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät S-5712ACSH2-I4T1U :n soveltamiseen teknisissä ratkaisuissa

  1. What is the S-5712ACSH2-I4T1U used for in technical solutions?

    • The S-5712ACSH2-I4T1U is a high-performance, multi-function switch designed for use in industrial Ethernet applications.
  2. What are the key features of the S-5712ACSH2-I4T1U?

    • The key features include 12 ports with advanced Layer 2+ management functions, support for Gigabit and Fast Ethernet, and industrial-grade design for harsh environments.
  3. How does the S-5712ACSH2-I4T1U enhance network performance?

    • It enhances network performance through its advanced QoS (Quality of Service) capabilities, VLAN support, and robust security features.
  4. Can the S-5712ACSH2-I4T1U be integrated into existing industrial networks?

    • Yes, it is designed for seamless integration into existing industrial networks and supports various protocols and standards commonly used in industrial automation.
  5. What are the typical applications of the S-5712ACSH2-I4T1U in technical solutions?

    • Typical applications include factory automation, process control, transportation systems, and other industrial environments requiring reliable and high-performance networking.
  6. Does the S-5712ACSH2-I4T1U support redundant network configurations?

    • Yes, it supports redundancy protocols such as STP/RSTP/MSTP and offers link aggregation for increased network reliability.
  7. How does the S-5712ACSH2-I4T1U ensure data integrity in industrial environments?

    • It ensures data integrity through features like port-based and MAC-based authentication, as well as secure management access controls.
  8. Is the S-5712ACSH2-I4T1U suitable for use in harsh environmental conditions?

    • Yes, it is designed to operate reliably in harsh conditions, with wide operating temperature ranges and resistance to shock, vibration, and electromagnetic interference.
  9. What kind of management options are available for the S-5712ACSH2-I4T1U?

    • It offers various management options including web-based management, SNMP, CLI (Command Line Interface), and RMON (Remote Monitoring).
  10. Are there any specific certifications or approvals associated with the S-5712ACSH2-I4T1U?

    • Yes, it typically holds certifications such as CE, FCC, and UL/cUL, ensuring compliance with industry standards and regulations.