S-80129BLMC-JEOT2U belongs to the category of electronic components.
This product is commonly used in electronic circuits for various applications.
The S-80129BLMC-JEOT2U comes in a small surface mount package.
The essence of this product lies in its ability to provide stable and efficient performance in electronic circuits.
The S-80129BLMC-JEOT2U is typically packaged in reels or trays, with a quantity of 1000 units per reel/tray.
The S-80129BLMC-JEOT2U has the following pin configuration:
The S-80129BLMC-JEOT2U is a voltage regulator that converts an input voltage of 3.3V to a stable output voltage of 5V. It utilizes a control circuit to maintain the desired output voltage by adjusting the internal feedback loop.
The S-80129BLMC-JEOT2U can be used in various electronic devices and systems, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - IoT (Internet of Things) devices
These alternative models offer similar functionality and characteristics to the S-80129BLMC-JEOT2U, providing flexibility in design choices.
In conclusion, the S-80129BLMC-JEOT2U is a compact and reliable voltage regulator that finds applications in various electronic devices. Its high efficiency and wide operating temperature range make it suitable for diverse environments. However, its limited output current capacity restricts its use in high-power applications.
Sure! Here are 10 common questions and answers related to the application of S-80129BLMC-JEOT2U in technical solutions:
Q: What is the operating voltage range of S-80129BLMC-JEOT2U? A: The operating voltage range of S-80129BLMC-JEOT2U is typically between 2.0V and 6.0V.
Q: What is the maximum output current of S-80129BLMC-JEOT2U? A: The maximum output current of S-80129BLMC-JEOT2U is 100mA.
Q: Can S-80129BLMC-JEOT2U be used in battery-powered applications? A: Yes, S-80129BLMC-JEOT2U can be used in battery-powered applications as it has a low quiescent current consumption.
Q: Does S-80129BLMC-JEOT2U have built-in overcurrent protection? A: No, S-80129BLMC-JEOT2U does not have built-in overcurrent protection. External protection circuitry may be required.
Q: What is the typical dropout voltage of S-80129BLMC-JEOT2U? A: The typical dropout voltage of S-80129BLMC-JEOT2U is 200mV at 100mA load.
Q: Can S-80129BLMC-JEOT2U handle input voltage spikes or transients? A: Yes, S-80129BLMC-JEOT2U has built-in input voltage transient protection up to 45V.
Q: Is S-80129BLMC-JEOT2U suitable for automotive applications? A: Yes, S-80129BLMC-JEOT2U is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.
Q: What is the operating temperature range of S-80129BLMC-JEOT2U? A: The operating temperature range of S-80129BLMC-JEOT2U is typically between -40°C and +85°C.
Q: Can S-80129BLMC-JEOT2U be used in space-constrained designs? A: Yes, S-80129BLMC-JEOT2U is available in a compact SOT-23-5 package, making it suitable for space-constrained designs.
Q: Does S-80129BLMC-JEOT2U have a shutdown mode? A: No, S-80129BLMC-JEOT2U does not have a shutdown mode. It operates continuously once powered on.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.