Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
S-80135CNPF-JKUTFU

S-80135CNPF-JKUTFU

Product Overview

Category

S-80135CNPF-JKUTFU belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

The S-80135CNPF-JKUTFU IC is available in a small form factor package, which ensures easy integration into various electronic devices.

Essence

The essence of this IC lies in its ability to regulate voltage and efficiently manage power supply within electronic systems.

Packaging/Quantity

The S-80135CNPF-JKUTFU IC is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.0V - 5.5V
  • Maximum Output Current: 150mA
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

The S-80135CNPF-JKUTFU IC has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: The IC ensures a stable output voltage within the specified range, regardless of input voltage fluctuations.
  • Power management: It efficiently manages power consumption, optimizing energy usage and extending battery life in portable devices.
  • Enable control: The EN pin allows for easy on/off control of the IC, providing flexibility in power management.
  • Overcurrent protection: The IC incorporates overcurrent protection mechanisms to safeguard connected devices from excessive current flow.

Advantages and Disadvantages

Advantages

  • Compact size enables integration into space-constrained electronic devices.
  • High efficiency results in minimal power loss during voltage regulation.
  • Wide input and output voltage ranges provide versatility in various applications.
  • Low quiescent current ensures minimal power consumption during standby or idle modes.

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications.
  • Temperature range limitations may require additional thermal management measures in extreme environments.

Working Principles

The S-80135CNPF-JKUTFU IC utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It continuously monitors the output voltage through the FB pin and adjusts its internal components accordingly to maintain a stable output within the specified range. The enable pin (EN) allows for easy control of the IC's operation, enabling power management as per the device requirements.

Detailed Application Field Plans

The S-80135CNPF-JKUTFU IC finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

  1. S-80135BNPF-JKUTFU
  2. S-80135CNPF-JKUTFT
  3. S-80135DNPF-JKUTFU
  4. S-80135ENPF-JKUTFU
  5. S-80135FNPF-JKUTFU

These alternative models offer similar voltage regulation and power management capabilities, with slight variations in specifications and package types.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät S-80135CNPF-JKUTFU :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of S-80135CNPF-JKUTFU in technical solutions:

  1. Q: What is S-80135CNPF-JKUTFU? A: S-80135CNPF-JKUTFU is a specific model or part number of a component used in technical solutions.

  2. Q: What is the purpose of S-80135CNPF-JKUTFU? A: The purpose of S-80135CNPF-JKUTFU is to perform a specific function within a technical solution, such as voltage regulation or power management.

  3. Q: How does S-80135CNPF-JKUTFU work? A: S-80135CNPF-JKUTFU works by receiving an input voltage and regulating it to provide a stable output voltage according to its specifications.

  4. Q: What are the key features of S-80135CNPF-JKUTFU? A: Some key features of S-80135CNPF-JKUTFU may include high efficiency, low power consumption, overcurrent protection, and thermal shutdown.

  5. Q: What is the input voltage range for S-80135CNPF-JKUTFU? A: The input voltage range for S-80135CNPF-JKUTFU may vary depending on the specific model, but it is typically specified in the datasheet.

  6. Q: What is the output voltage range for S-80135CNPF-JKUTFU? A: The output voltage range for S-80135CNPF-JKUTFU is also specified in the datasheet and can vary based on the specific model.

  7. Q: Can S-80135CNPF-JKUTFU handle high current loads? A: The current handling capacity of S-80135CNPF-JKUTFU is specified in the datasheet. It is important to ensure that it can handle the required load.

  8. Q: Is S-80135CNPF-JKUTFU suitable for automotive applications? A: Some models of S-80135CNPF-JKUTFU may be designed and tested for automotive applications, but it is essential to check the datasheet for specific certifications and ratings.

  9. Q: Are there any recommended external components to use with S-80135CNPF-JKUTFU? A: The datasheet of S-80135CNPF-JKUTFU usually provides a list of recommended external components, such as capacitors or resistors, for optimal performance.

  10. Q: Where can I find more information about S-80135CNPF-JKUTFU? A: You can find more detailed information about S-80135CNPF-JKUTFU in its datasheet, which is typically available on the manufacturer's website or through authorized distributors.

Please note that the specific answers may vary depending on the actual specifications and documentation provided by the manufacturer for S-80135CNPF-JKUTFU.