S-80836CNY-B2-U belongs to the category of integrated circuits (ICs).
This IC is commonly used for voltage detection and reset functions in electronic devices.
The S-80836CNY-B2-U IC is packaged in a SOT-23-5 package. It is available in tape and reel packaging, with a quantity of 3000 units per reel.
The S-80836CNY-B2-U IC has the following pin configuration:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power supply input | | 2 | GND | Ground | | 3 | RESET | Reset output | | 4 | VSS | Ground | | 5 | VIN | Voltage detection input |
The S-80836CNY-B2-U IC works based on a voltage divider network and a comparator circuit. It compares the input voltage with a reference voltage and generates a reset signal when the input voltage falls below the threshold.
The S-80836CNY-B2-U IC finds applications in various electronic devices that require voltage monitoring and reset functions. Some potential application fields include: - Battery-powered devices - Microcontrollers and microprocessors - Industrial control systems - Automotive electronics - Consumer electronics
Here are some alternative models that offer similar functionality to the S-80836CNY-B2-U IC: - S-80836CNY-B2-T - S-80836CNY-B2-G - S-80836CNY-B2-R
These alternative models provide different package options or additional features, allowing designers to choose the most suitable option for their specific requirements.
Word count: 440 words
Sure! Here are 10 common questions and answers related to the application of S-80836CNY-B2-U in technical solutions:
1. What is S-80836CNY-B2-U? - S-80836CNY-B2-U is a voltage detector IC (integrated circuit) manufactured by a specific company. It is commonly used in various technical solutions for voltage monitoring and detection purposes.
2. What is the operating voltage range of S-80836CNY-B2-U? - The operating voltage range of S-80836CNY-B2-U is typically between 1.6V and 6.0V.
3. How does S-80836CNY-B2-U work? - S-80836CNY-B2-U works by monitoring the input voltage and providing an output signal when the voltage exceeds or falls below a certain threshold level, as set by the user.
4. What is the output type of S-80836CNY-B2-U? - S-80836CNY-B2-U has an open-drain output type, which means it can sink current but cannot source current.
5. Can S-80836CNY-B2-U be used in battery-powered applications? - Yes, S-80836CNY-B2-U can be used in battery-powered applications as it operates within a wide voltage range and consumes very low power.
6. What is the typical quiescent current consumption of S-80836CNY-B2-U? - The typical quiescent current consumption of S-80836CNY-B2-U is around 1.0µA, making it suitable for low-power applications.
7. Is S-80836CNY-B2-U suitable for overvoltage protection? - Yes, S-80836CNY-B2-U can be used for overvoltage protection by setting the threshold voltage to the desired level and triggering an action when the voltage exceeds that level.
8. Can S-80836CNY-B2-U be used in automotive applications? - Yes, S-80836CNY-B2-U is suitable for automotive applications as it meets the necessary standards and has a wide operating voltage range.
9. What is the response time of S-80836CNY-B2-U? - The response time of S-80836CNY-B2-U is typically very fast, usually within a few microseconds.
10. Can S-80836CNY-B2-U be used in industrial control systems? - Yes, S-80836CNY-B2-U can be used in industrial control systems for voltage monitoring and detection purposes, providing reliable performance in such applications.
Please note that the specific details and answers may vary depending on the manufacturer's specifications and application requirements.