S-80958CLPF-G7UTFG

Product Overview

Category

S-80958CLPF-G7UTFG belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

• Voltage detection range: 1.6V to 6.0V
• Low supply current: 1.0µA (typical)
• Reset output type: active low
• Package type: SOT-23-5
• RoHS compliant

Package and Quantity

The S-80958CLPF-G7UTFG is available in a SOT-23-5 package. Each package contains one unit of the IC.

Specifications

• Supply voltage range: 1.6V to 6.0V
• Operating temperature range: -40°C to +85°C
• Output voltage: 0.8V (typical)
• Quiescent current: 1.0µA (typical)
• Reset threshold accuracy: ±2.0%
• Power-on reset delay time: 200ms (typical)

Detailed Pin Configuration

The S-80958CLPF-G7UTFG has five pins arranged as follows:

```

---

| | --| VDD GND |-- Pin 1: Supply Voltage (VDD) --| RESET OUT |-- Pin 2: Reset Output --| RESET IN |-- Pin 3: Reset Input --| GND |-- Pin 4: Ground (GND) --| VDD |-- Pin 5: Supply Voltage (VDD) |___________| ```

Functional Features

• Voltage detection: The IC monitors the input voltage and provides a reset signal when it falls below a certain threshold.
• Active low reset output: The reset output becomes active low when the voltage drops below the threshold.
• Low power consumption: The IC operates with a very low supply current, making it suitable for battery-powered devices.

Advantages

• Wide voltage detection range allows for versatile applications.
• Low quiescent current minimizes power consumption.
• Small package size enables space-saving designs.
• RoHS compliance ensures environmental friendliness.

Disadvantages

• Reset threshold accuracy may have slight variations.
• Power-on reset delay time may not be suitable for all applications.

Working Principles

The S-80958CLPF-G7UTFG utilizes a voltage detection circuit to monitor the input voltage. When the voltage falls below the preset threshold, the reset output is activated, indicating a power failure or low voltage condition. This feature helps prevent erratic behavior or data corruption in electronic systems.

Detailed Application Field Plans

The S-80958CLPF-G7UTFG can be used in various applications, including: 1. Battery-powered devices: Provides reliable reset functionality to ensure proper operation even with fluctuating battery voltages. 2. Microcontrollers and microprocessors: Protects sensitive components from voltage drops during power supply fluctuations. 3. Industrial control systems: Ensures stable operation by resetting the system when the supply voltage deviates from the desired range. 4. Automotive electronics: Guards against voltage dips or spikes that could disrupt critical functions.

Detailed Alternative Models

1. S-80958CNPF-G7UTFG: Similar specifications but with an active high reset output.
2. S-80958CLMC-G7UTFG: Package type: SOT-23-6; additional pin for manual reset function.
3. S-80958CJPF-G7UTFG: Lower reset threshold accuracy of ±3.0%, suitable for less critical applications.

These alternative models offer similar functionality and can be considered based on specific requirements.

In conclusion, the S-80958CLPF-G7UTFG is a versatile integrated circuit used for voltage detection and reset functions. Its wide voltage range, low power consumption, and compact package make it suitable for various applications. However, slight variations in reset threshold accuracy and power-on reset delay time should be considered. Alternative models with different specifications are available to cater to specific needs.