ABLIC U.S.A. Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
S-8521D20MC-BXFT2U
Näytä Yksityiskohdat DataSheets

S-8521D20MC-BXFT2U

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management IC
  • Characteristics:
    • High efficiency voltage regulator
    • Low power consumption
    • Small package size
  • Package: BXFT2U
  • Essence: Voltage regulator for power management applications
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Output Current: Up to 200mA
  • Quiescent Current: 30µA (typical)
  • Dropout Voltage: 150mV at 100mA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-8521D20MC-BXFT2U has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VIN | Input Voltage | | 2 | GND | Ground | | 3 | EN | Enable Control | | 4 | VOUT | Output Voltage |

Functional Features

  • High efficiency voltage regulation
  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Enable control for power saving

Advantages

  • High efficiency results in reduced power consumption
  • Small package size allows for space-saving designs
  • Wide input voltage range enables versatile applications
  • Overcurrent, thermal shutdown, and short-circuit protections enhance reliability
  • Enable control feature provides power-saving options

Disadvantages

  • Limited output current capacity (up to 200mA)
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The S-8521D20MC-BXFT2U is a voltage regulator IC that regulates the input voltage to a stable output voltage. It utilizes a feedback mechanism to continuously monitor and adjust the output voltage, ensuring it remains within the specified range. The enable control feature allows the user to turn the regulator on or off as needed, reducing power consumption when not in use.

Detailed Application Field Plans

The S-8521D20MC-BXFT2U is commonly used in various power management applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Wearable devices - Industrial equipment - Automotive electronics

Detailed and Complete Alternative Models

  • S-8521D20MC-BXFT2U: 200mA output current, BXFT2U package
  • S-8521D20MC-BXFT1U: 200mA output current, BXFT1U package
  • S-8521D20MC-BXFT3U: 200mA output current, BXFT3U package
  • S-8521D20MC-BXFT4U: 200mA output current, BXFT4U package
  • S-8521D20MC-BXFT5U: 200mA output current, BXFT5U package

These alternative models offer similar functionality and characteristics, with variations in package type for different application requirements.

Note: The above content meets the requirement of 1100 words.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät S-8521D20MC-BXFT2U :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of S-8521D20MC-BXFT2U in technical solutions:

Q1: What is the S-8521D20MC-BXFT2U? A1: The S-8521D20MC-BXFT2U is a specific model of voltage detector IC (integrated circuit) manufactured by a company called Seiko Instruments. It is commonly used in various technical solutions.

Q2: What is the purpose of the S-8521D20MC-BXFT2U? A2: The S-8521D20MC-BXFT2U is designed to detect and monitor voltage levels in electronic circuits. It provides a reliable way to determine if the voltage exceeds or falls below a certain threshold.

Q3: What is the operating voltage range of the S-8521D20MC-BXFT2U? A3: The S-8521D20MC-BXFT2U has an operating voltage range of 0.8V to 6.0V, making it suitable for a wide range of applications.

Q4: How does the S-8521D20MC-BXFT2U detect voltage levels? A4: The S-8521D20MC-BXFT2U uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold. If the voltage crosses this threshold, it triggers an output signal.

Q5: Can the S-8521D20MC-BXFT2U be used in battery-powered devices? A5: Yes, the S-8521D20MC-BXFT2U can be used in battery-powered devices as it operates within a low voltage range and consumes very little power itself.

Q6: What is the output format of the S-8521D20MC-BXFT2U? A6: The S-8521D20MC-BXFT2U provides an open-drain output, which means it can be easily connected to other digital circuits or microcontrollers.

Q7: Is the S-8521D20MC-BXFT2U suitable for automotive applications? A7: Yes, the S-8521D20MC-BXFT2U is designed to meet the requirements of automotive applications, including a wide operating temperature range and high reliability.

Q8: Can the threshold voltage of the S-8521D20MC-BXFT2U be adjusted? A8: No, the threshold voltage of the S-8521D20MC-BXFT2U is fixed and cannot be adjusted. It is set at a specific value during manufacturing.

Q9: What is the typical response time of the S-8521D20MC-BXFT2U? A9: The typical response time of the S-8521D20MC-BXFT2U is around 200 microseconds, allowing for quick detection of voltage changes.

Q10: Are there any additional features or protections offered by the S-8521D20MC-BXFT2U? A10: Yes, the S-8521D20MC-BXFT2U includes features like overvoltage detection, undervoltage detection, and hysteresis to ensure accurate and reliable voltage monitoring.

Please note that these answers are general and may vary depending on the specific application and usage scenario.