Katso tuotteen tekniset tiedot.
AOZ9005DI
Product Overview
The AOZ9005DI belongs to the category of voltage regulator ICs and is commonly used in electronic devices to regulate voltage levels. Its characteristics include high efficiency, low dropout voltage, and thermal shutdown protection. The package type for the AOZ9005DI is a small outline integrated circuit (SOIC), and it is available in various quantities per package.
Specifications
- Input Voltage Range: 2.7V to 18V
- Output Voltage Range: 0.8V to 16V
- Maximum Output Current: 5A
- Dropout Voltage: 300mV at 1A
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The AOZ9005DI has a standard pin configuration with input, output, and ground pins, as well as additional pins for feedback and enable functions. The detailed pinout is as follows: 1. VIN (Input Voltage) 2. GND (Ground) 3. FB (Feedback) 4. EN (Enable) 5. NC (No Connection) 6. VOUT (Output Voltage)
Functional Features
- High Efficiency: The AOZ9005DI offers high efficiency, minimizing power loss during voltage regulation.
- Thermal Shutdown Protection: It includes built-in thermal shutdown protection to prevent damage from excessive heat.
- Low Dropout Voltage: The low dropout voltage ensures stable operation even when the input voltage is close to the output voltage.
Advantages and Disadvantages
Advantages
- High efficiency
- Wide input voltage range
- Thermal shutdown protection
- Low dropout voltage
Disadvantages
- Higher cost compared to traditional linear regulators
- Sensitive to external noise and fluctuations
Working Principles
The AOZ9005DI operates by comparing the actual output voltage to a reference voltage and adjusting the internal circuitry to maintain a stable output. When enabled, it regulates the output voltage based on the feedback received from the load.
Detailed Application Field Plans
The AOZ9005DI is commonly used in various applications such as: - Portable electronic devices - Battery-powered systems - Industrial automation - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models to the AOZ9005DI include: - LM2940 - LT1086 - TPS7A47
In conclusion, the AOZ9005DI is a versatile voltage regulator IC with high efficiency and robust protection features, making it suitable for a wide range of electronic applications.
[Word Count: 306]
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät AOZ9005DI :n soveltamiseen teknisissä ratkaisuissa
What is AOZ9005DI?
- AOZ9005DI is a high-efficiency, 4A synchronous buck converter designed for various applications, including industrial, automotive, and consumer electronics.
What is the input voltage range of AOZ9005DI?
- The input voltage range of AOZ9005DI is from 4.5V to 18V.
What is the output voltage range of AOZ9005DI?
- The output voltage range of AOZ9005DI is from 0.6V to 5.5V.
What is the typical efficiency of AOZ9005DI?
- The typical efficiency of AOZ9005DI is over 90% at full load.
What are the key features of AOZ9005DI?
- Some key features of AOZ9005DI include integrated high-side and low-side power MOSFETs, adjustable soft-start, cycle-by-cycle current limit, and thermal shutdown protection.
What are the typical applications of AOZ9005DI?
- Typical applications of AOZ9005DI include point-of-load regulation, distributed power systems, battery-powered devices, and automotive infotainment systems.
What is the operating temperature range of AOZ9005DI?
- The operating temperature range of AOZ9005DI is from -40°C to 125°C.
What is the package type of AOZ9005DI?
- AOZ9005DI is available in a compact 3mm x 3mm QFN package.
Does AOZ9005DI have built-in overcurrent protection?
- Yes, AOZ9005DI has cycle-by-cycle current limit protection to prevent overcurrent conditions.
Is AOZ9005DI suitable for automotive applications?
- Yes, AOZ9005DI is suitable for automotive applications due to its wide input voltage range and robust design.
Feel free to ask if you need further information on any of these questions!