JC502C3R5/20M Product Overview
Introduction
The JC502C3R5/20M is a crucial component in the field of electronic devices, offering specific characteristics and functionality that cater to various applications. This entry will provide an in-depth analysis of the product, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Electronic Components
- Use: Frequency Control
- Characteristics: High precision, stability, compact size
- Package: SMD (Surface Mount Device)
- Essence: Crystal Oscillator
- Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications
- Frequency: 3.5MHz
- Tolerance: ±20ppm
- Operating Temperature Range: -40°C to +85°C
- Supply Voltage: 3.3V
- Output Waveform: CMOS
Detailed Pin Configuration
The JC502C3R5/20M has a standard 4-pin configuration: 1. Pin 1: Output 2. Pin 2: Ground 3. Pin 3: NC (No Connection) 4. Pin 4: Vcc (Supply Voltage)
Functional Features
- Precise frequency control for electronic circuits
- Stable output waveform for reliable signal processing
- Compact SMD package for space-constrained designs
- Wide operating temperature range for versatile applications
Advantages and Disadvantages
Advantages
- High precision and stability
- Compact size for space-saving designs
- Wide operating temperature range
Disadvantages
- Limited frequency range
- Sensitive to external disturbances
Working Principles
The JC502C3R5/20M operates based on the piezoelectric effect of the crystal, where the mechanical deformation of the crystal generates an electrical signal at a specific frequency. This signal is then amplified and conditioned to produce a stable output waveform.
Detailed Application Field Plans
The JC502C3R5/20M finds extensive use in various electronic devices and systems, including: - Microcontrollers and microprocessors - Communication equipment - Consumer electronics - Industrial automation systems
Detailed and Complete Alternative Models
For applications requiring different frequency ranges or specifications, alternative models include: - JC503C4R0/25M (4.0MHz, ±25ppm) - JC505C6R0/30M (6.0MHz, ±30ppm) - JC507C8R0/35M (8.0MHz, ±35ppm)
In conclusion, the JC502C3R5/20M crystal oscillator serves as a fundamental component in electronic devices, providing precise frequency control and stable operation across various applications.
Word Count: 345
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät JC502C3R5/20M :n soveltamiseen teknisissä ratkaisuissa
What is JC502C3R5/20M?
- JC502C3R5/20M is a type of surface mount chip inductor commonly used in electronic circuits to filter and control the flow of electrical current.
What are the key specifications of JC502C3R5/20M?
- The key specifications of JC502C3R5/20M include its inductance value, rated current, resistance, and operating frequency range.
How is JC502C3R5/20M typically used in technical solutions?
- JC502C3R5/20M is often used in technical solutions for applications such as power supplies, RF circuits, and signal filtering due to its ability to store and release energy in the form of a magnetic field.
What are the advantages of using JC502C3R5/20M in technical solutions?
- Some advantages of using JC502C3R5/20M include its small size, high reliability, and ability to handle high frequencies, making it suitable for compact and efficient circuit designs.
Are there any limitations or considerations when using JC502C3R5/20M?
- It's important to consider factors such as temperature stability, saturation current, and self-resonant frequency when using JC502C3R5/20M to ensure optimal performance in technical solutions.
Can JC502C3R5/20M be used in high-frequency applications?
- Yes, JC502C3R5/20M is designed to operate effectively at high frequencies, making it suitable for use in RF circuits and other high-frequency applications.
What are the recommended soldering and mounting techniques for JC502C3R5/20M?
- Proper soldering and mounting techniques, such as reflow soldering or manual soldering with appropriate temperature profiles, are recommended to ensure reliable connections and prevent damage to the component.
Is JC502C3R5/20M suitable for automotive or industrial applications?
- Yes, JC502C3R5/20M is often used in automotive and industrial applications due to its robust construction and ability to withstand harsh operating conditions.
How can I determine the best JC502C3R5/20M for my specific technical solution?
- Consider consulting the datasheet and application notes provided by the manufacturer, as well as seeking guidance from experienced engineers or technical support to select the most suitable JC502C3R5/20M for your application.
Where can I purchase JC502C3R5/20M for my technical project?
- JC502C3R5/20M can be purchased from authorized distributors or directly from the manufacturer to ensure authenticity and quality.