Amphenol Advanced Sensors
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
NPC-1210-050A-1-S
Näytä Yksityiskohdat DataSheets

NPC-1210-050A-1-S

Product Overview

Category: Electronic Component
Use: Power Conditioning
Characteristics: High efficiency, compact size
Package: Surface Mount Device (SMD)
Essence: Voltage Regulator
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage: 4.5V to 28V
  • Output Voltage: 5V
  • Output Current: 1A
  • Dropout Voltage: 0.5V at 1A
  • Operating Temperature: -40°C to +125°C
  • Package Type: SOT-223

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse battery protection

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact size

Disadvantages: - Limited output current capacity - Sensitive to thermal conditions

Working Principles

The NPC-1210-050A-1-S is a voltage regulator designed to maintain a stable 5V output voltage regardless of variations in the input voltage. It achieves this by using internal circuitry to adjust the output voltage based on the input voltage and load conditions.

Detailed Application Field Plans

The NPC-1210-050A-1-S is commonly used in various electronic devices such as: - Portable electronic gadgets - Battery-powered equipment - Automotive electronics

Detailed and Complete Alternative Models

  1. LM7805
  2. AMS1117-5.0
  3. LT1086

This content provides a comprehensive overview of the NPC-1210-050A-1-S, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät NPC-1210-050A-1-S :n soveltamiseen teknisissä ratkaisuissa

  1. What is NPC-1210-050A-1-S?

    • NPC-1210-050A-1-S is a specific model of a component, such as a resistor or capacitor, commonly used in electronic circuits.

  2. What are the key specifications of NPC-1210-050A-1-S?

    • The key specifications of NPC-1210-050A-1-S include its resistance or capacitance value, power rating, tolerance, and temperature coefficient.

  3. How is NPC-1210-050A-1-S typically used in technical solutions?

    • NPC-1210-050A-1-S is often used in various technical solutions such as power supplies, signal conditioning circuits, filters, and voltage regulation applications.

  4. What are the advantages of using NPC-1210-050A-1-S in technical solutions?

    • NPC-1210-050A-1-S offers high precision, reliability, and stability, making it suitable for demanding technical applications.

  5. Are there any limitations or considerations when using NPC-1210-050A-1-S?

    • Some considerations when using NPC-1210-050A-1-S include its maximum operating temperature, voltage limitations, and potential sensitivity to environmental factors.

  6. Can NPC-1210-050A-1-S be used in high-frequency applications?

    • Yes, NPC-1210-050A-1-S can be used in high-frequency applications, but it's important to consider its frequency response and impedance characteristics.

  7. What are the typical failure modes of NPC-1210-050A-1-S?

    • Typical failure modes of NPC-1210-050A-1-S may include open circuit, short circuit, or drift in its electrical parameters over time.

  8. Is NPC-1210-050A-1-S compatible with lead-free soldering processes?

    • Yes, NPC-1210-050A-1-S is typically compatible with lead-free soldering processes, but it's important to follow the manufacturer's recommendations for proper handling and soldering techniques.

  9. Are there alternative components that can be used in place of NPC-1210-050A-1-S?

    • Yes, there are alternative components with similar specifications that can be used as substitutes for NPC-1210-050A-1-S, but it's important to ensure compatibility with the overall circuit design.

  10. Where can I find detailed technical documentation for NPC-1210-050A-1-S?

    • Detailed technical documentation for NPC-1210-050A-1-S can typically be found on the manufacturer's website, including datasheets, application notes, and specifications.