Analog Devices Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
ADE7868AACPZ
Näytä Yksityiskohdat DataSheets

ADE7868AACPZ

Product Overview

Category: Integrated Circuit (IC)

Use: Energy Metering and Power Quality Monitoring

Characteristics: - High accuracy energy measurement - Power quality monitoring - Harmonic analysis - Voltage sag and swell detection - Current and voltage RMS measurements - Active, reactive, and apparent power calculations - On-chip temperature sensor - SPI and I2C interfaces for communication - Low power consumption

Package: LFCSP (Lead Frame Chip Scale Package)

Essence: The ADE7868AACPZ is a highly integrated IC designed for energy metering and power quality monitoring applications. It offers accurate energy measurement and comprehensive power quality analysis capabilities.

Packaging/Quantity: The ADE7868AACPZ is available in a LFCSP package and is typically sold in reels of 2500 units.

Specifications

  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Power Consumption: 10mW (typical)
  • Communication Interfaces: SPI, I2C
  • ADC Resolution: 24-bit
  • Number of Channels: 6
  • Frequency Range: 45Hz to 65Hz
  • Harmonic Analysis: Up to the 31st harmonic

Detailed Pin Configuration

The ADE7868AACPZ has a total of 32 pins. Here is the detailed pin configuration:

  1. VDD: Power supply
  2. GND: Ground
  3. IRQ: Interrupt request output
  4. SDA: I2C data input/output
  5. SCL: I2C clock input
  6. CSB: Chip select input for SPI interface
  7. SDI: Serial data input for SPI interface
  8. SDO: Serial data output for SPI interface
  9. SCLK: Serial clock input for SPI interface
  10. REF: Reference voltage input
  11. VAP: Voltage channel A phase input
  12. VAN: Voltage channel A neutral input
  13. VBP: Voltage channel B phase input
  14. VBN: Voltage channel B neutral input
  15. VCP: Voltage channel C phase input
  16. VCN: Voltage channel C neutral input
  17. IAP: Current channel A phase input
  18. IAN: Current channel A neutral input
  19. IBP: Current channel B phase input
  20. IBN: Current channel B neutral input
  21. ICP: Current channel C phase input
  22. ICN: Current channel C neutral input
  23. TEMP: On-chip temperature sensor output
  24. CLKOUT: Clock output
  25. DIO1: Digital input/output 1
  26. DIO2: Digital input/output 2
  27. DIO3: Digital input/output 3
  28. DIO4: Digital input/output 4
  29. DIO5: Digital input/output 5
  30. DIO6: Digital input/output 6
  31. DIO7: Digital input/output 7
  32. DIO8: Digital input/output 8

Functional Features

The ADE7868AACPZ offers the following functional features:

  • Accurate energy measurement: The IC provides high accuracy energy measurement for various types of loads.
  • Power quality monitoring: It can monitor and analyze power quality parameters such as voltage sag, swell, and harmonic distortion.
  • Harmonic analysis: The IC supports up to the 31st harmonic analysis, allowing detailed assessment of harmonic content in the power system.
  • RMS measurements: It can measure the root mean square (RMS) values of current and voltage waveforms.
  • Power calculations: The IC calculates active, reactive, and apparent power for accurate energy monitoring.
  • Temperature sensing: On-chip temperature sensor provides temperature measurement for system monitoring.
  • Communication interfaces: It features SPI and I2C interfaces for easy integration with microcontrollers or communication modules.

Advantages and Disadvantages

Advantages: - High accuracy energy measurement - Comprehensive power quality analysis - Wide frequency range for harmonic analysis - Low power consumption - On-chip temperature sensor for system monitoring - Multiple communication interfaces for easy integration

Disadvantages: - Limited to 31st harmonic analysis - Requires external microcontroller or communication module for data processing and display

Working Principles

The ADE7868AACPZ operates based on the principles of current and voltage sensing, analog-to-digital conversion, and digital signal processing. It measures the current and voltage waveforms, performs calculations for energy and power parameters, and analyzes power quality characteristics such as harmonics. The IC communicates the measured data and analysis results to an external microcontroller or communication module for further processing and display.

Detailed Application Field Plans

The ADE7868

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät ADE7868AACPZ :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of ADE7868AACPZ in technical solutions:

  1. Q: What is the ADE7868AACPZ? A: The ADE7868AACPZ is a highly integrated energy metering IC (integrated circuit) that provides accurate measurement of electrical parameters in various applications.

  2. Q: What are the key features of the ADE7868AACPZ? A: The key features of the ADE7868AACPZ include multi-channel energy measurement, power quality monitoring, harmonic analysis, tamper detection, and communication interfaces.

  3. Q: How many channels does the ADE7868AACPZ support? A: The ADE7868AACPZ supports up to six independent channels for energy measurement, making it suitable for applications with multiple circuits or phases.

  4. Q: Can the ADE7868AACPZ measure both active and reactive power? A: Yes, the ADE7868AACPZ can accurately measure both active and reactive power, allowing for comprehensive energy monitoring and analysis.

  5. Q: Does the ADE7868AACPZ provide power quality monitoring capabilities? A: Yes, the ADE7868AACPZ offers power quality monitoring features such as voltage sag/swell detection, frequency variation tracking, and waveform distortion analysis.

  6. Q: Can the ADE7868AACPZ detect tampering or unauthorized access? A: Yes, the ADE7868AACPZ includes tamper detection mechanisms like reverse energy detection, magnetic tamper detection, and supply voltage monitoring.

  7. Q: What communication interfaces are supported by the ADE7868AACPZ? A: The ADE7868AACPZ supports various communication interfaces, including SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit), enabling easy integration with microcontrollers or other devices.

  8. Q: Is the ADE7868AACPZ suitable for single-phase applications? A: Yes, the ADE7868AACPZ can be used in both single-phase and multi-phase applications, making it versatile for a wide range of energy metering solutions.

  9. Q: Does the ADE7868AACPZ provide harmonic analysis capabilities? A: Yes, the ADE7868AACPZ offers comprehensive harmonic analysis, allowing users to monitor and analyze harmonic distortion in electrical systems.

  10. Q: What are some typical applications of the ADE7868AACPZ? A: The ADE7868AACPZ is commonly used in applications such as smart grid systems, energy management systems, industrial automation, building automation, and renewable energy monitoring.

Please note that these questions and answers are general and may vary depending on specific use cases and requirements.