Analog Devices Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
ADG211AKR-REEL
Näytä Yksityiskohdat DataSheets

ADG211AKR-REEL

Product Overview

Category

ADG211AKR-REEL belongs to the category of analog switches.

Use

This product is primarily used for signal routing and switching applications in electronic circuits.

Characteristics

  • Analog switch with low on-resistance
  • High bandwidth capability
  • Low power consumption
  • Wide supply voltage range
  • Fast switching speed

Package

ADG211AKR-REEL is available in a small outline package (SOP) with 16 pins.

Essence

The essence of ADG211AKR-REEL lies in its ability to provide efficient and reliable signal routing and switching functionality in various electronic systems.

Packaging/Quantity

This product is typically packaged in reels, with each reel containing a specific quantity of ADG211AKR-REEL units.

Specifications

  • Supply Voltage Range: ±4.5V to ±18V
  • On-Resistance: 35Ω (typical)
  • Bandwidth: 200MHz (typical)
  • Power Consumption: 0.5mW (typical)
  • Switching Time: 100ns (typical)

Detailed Pin Configuration

  1. IN1 - Input 1
  2. IN2 - Input 2
  3. IN3 - Input 3
  4. IN4 - Input 4
  5. GND - Ground
  6. COM - Common Terminal
  7. NO1 - Normally Open 1
  8. NC1 - Normally Closed 1
  9. NO2 - Normally Open 2
  10. NC2 - Normally Closed 2
  11. V+ - Positive Supply Voltage
  12. V- - Negative Supply Voltage
  13. IN5 - Input 5
  14. IN6 - Input 6
  15. IN7 - Input 7
  16. IN8 - Input 8

Functional Features

  • Low on-resistance ensures minimal signal distortion and loss.
  • High bandwidth capability allows for the transmission of high-frequency signals.
  • Wide supply voltage range enables compatibility with various power sources.
  • Fast switching speed facilitates quick signal routing and switching operations.

Advantages and Disadvantages

Advantages

  • Efficient signal routing and switching functionality
  • Low power consumption
  • Wide supply voltage range
  • Fast switching speed

Disadvantages

  • Limited number of input channels (8 in this case)
  • Relatively high on-resistance compared to some alternative models

Working Principles

ADG211AKR-REEL operates based on the principle of MOSFET-based analog switches. It utilizes MOSFET transistors to control the flow of signals between different input and output channels.

Detailed Application Field Plans

ADG211AKR-REEL finds applications in various fields, including: 1. Audio systems 2. Test and measurement equipment 3. Data acquisition systems 4. Communication devices 5. Industrial automation

Detailed and Complete Alternative Models

  1. ADG1411YRUZ - Analog Switch, Single, SPST, 4 ohm, 2.7V to 16V, TSSOP-14
  2. ADG5412BRUZ - Analog Switch, Quad, SPST, 4 ohm, 1.65V to 5.5V, TSSOP-16
  3. ADG1436YRUZ - Analog Switch, Dual, DPDT, 4 ohm, 2.7V to 16V, TSSOP-16
  4. ADG5412BCPZ-REEL7 - Analog Switch, Quad, SPST, 4 ohm, 1.65V to 5.5V, LFCSP-16

These alternative models offer similar functionality and can be considered as substitutes for ADG211AKR-REEL in different applications.

In conclusion, ADG211AKR-REEL is a versatile analog switch that provides efficient signal routing and switching capabilities. With its low power consumption, wide supply voltage range, and fast switching speed, it is suitable for various electronic systems across different industries.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät ADG211AKR-REEL :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of ADG211AKR-REEL in technical solutions:

  1. Q: What is the ADG211AKR-REEL? A: The ADG211AKR-REEL is a high-performance analog switch designed for use in various technical applications.

  2. Q: What are the key features of the ADG211AKR-REEL? A: The key features include low on-resistance, wide voltage range, low power consumption, and high reliability.

  3. Q: What is the voltage range supported by the ADG211AKR-REEL? A: The ADG211AKR-REEL supports a wide voltage range from -15V to +15V.

  4. Q: What is the on-resistance of the ADG211AKR-REEL? A: The on-resistance of the ADG211AKR-REEL is typically very low, usually around a few ohms.

  5. Q: Can the ADG211AKR-REEL be used in both digital and analog applications? A: Yes, the ADG211AKR-REEL can be used in both digital and analog applications due to its versatile design.

  6. Q: What is the maximum current handling capability of the ADG211AKR-REEL? A: The ADG211AKR-REEL can handle currents up to a few hundred milliamperes.

  7. Q: Is the ADG211AKR-REEL suitable for high-frequency applications? A: Yes, the ADG211AKR-REEL has a wide bandwidth and can be used in high-frequency applications.

  8. Q: Does the ADG211AKR-REEL have built-in protection features? A: Yes, the ADG211AKR-REEL has built-in electrostatic discharge (ESD) protection to ensure its reliability.

  9. Q: Can multiple ADG211AKR-REEL switches be cascaded together? A: Yes, multiple ADG211AKR-REEL switches can be cascaded together to increase the number of channels or expand functionality.

  10. Q: What are some typical applications of the ADG211AKR-REEL? A: The ADG211AKR-REEL is commonly used in audio/video signal routing, instrumentation, data acquisition systems, and communication equipment.

Please note that these answers are general and may vary depending on specific use cases and requirements.