Bourns Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TIC216D-S
Näytä Yksityiskohdat DataSheets

TIC216D-S

Product Overview

Category

The TIC216D-S belongs to the category of silicon controlled rectifiers (SCRs), which are semiconductor devices used for controlling large amounts of electrical power.

Use

It is commonly used in applications requiring high power control such as motor control, lighting control, and power supplies.

Characteristics

  • The TIC216D-S features a high surge current capability and high voltage ratings.
  • It is designed for use in general-purpose switching and phase control applications.

Package

The TIC216D-S is typically available in a TO-220AB package, which provides good thermal performance and high reliability.

Essence

The essence of the TIC216D-S lies in its ability to efficiently control high power loads with precision and reliability.

Packaging/Quantity

It is usually packaged in tubes or reels, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Average On-State Current: 12A
  • Repetitive Peak Off-State Voltage: 600V
  • Gate Trigger Current: 35mA
  • Holding Current: 50mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TIC216D-S has a standard TO-220AB pin configuration: 1. Anode 2. Cathode 3. Gate

Functional Features

  • High surge current capability
  • Low holding current for improved noise immunity
  • Planar passivated chip for enhanced reliability

Advantages and Disadvantages

Advantages

  • High surge current capability makes it suitable for demanding applications
  • Low holding current enhances noise immunity
  • Planar passivated chip improves reliability

Disadvantages

  • May require heat sinking in high-power applications
  • Sensitive to overvoltage conditions

Working Principles

The TIC216D-S operates by controlling the flow of current between the anode and cathode terminals using the gate signal. When the gate trigger current is applied, the device turns on and conducts current until the load current falls below the holding current level.

Detailed Application Field Plans

The TIC216D-S is widely used in various applications, including: - Motor control systems - Lighting dimming circuits - Uninterruptible power supplies (UPS) - Heating control systems

Detailed and Complete Alternative Models

Some alternative models to the TIC216D-S include: - TIC226D-S - TIC236D-S - TIC246D-S

This completes the English editing encyclopedia entry structure format for the TIC216D-S, providing comprehensive information about its product category, basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TIC216D-S :n soveltamiseen teknisissä ratkaisuissa

  1. What is the TIC216D-S?

    • The TIC216D-S is a silicon controlled rectifier (SCR) designed for use in high power switching applications.

  2. What is the maximum voltage and current rating of the TIC216D-S?

    • The TIC216D-S has a maximum voltage rating of 600V and a maximum current rating of 12A.

  3. What are the typical applications of the TIC216D-S?

    • The TIC216D-S is commonly used in AC motor control, industrial heating, power supply circuits, and other high power switching applications.

  4. How does the TIC216D-S operate?

    • The TIC216D-S operates as a switch, allowing current to flow when triggered by a small control signal.

  5. What are the key features of the TIC216D-S?

    • Key features include high surge capability, glass passivated junctions, and reliable operation in high temperature environments.

  6. What are the recommended heat sink and mounting techniques for the TIC216D-S?

    • It is recommended to use a proper heat sink and thermal compound to ensure efficient heat dissipation. Mounting should be done using appropriate hardware to maintain good thermal contact.

  7. What are the protection features of the TIC216D-S?

    • The TIC216D-S offers protection against overvoltage, overcurrent, and transient voltage events.

  8. Can the TIC216D-S be used in phase control applications?

    • Yes, the TIC216D-S is suitable for phase control applications due to its ability to handle high power levels.

  9. What are the typical triggering methods for the TIC216D-S?

    • The TIC216D-S can be triggered using pulse transformers, optocouplers, or directly with a gate current.

  10. Are there any specific considerations for driving the gate of the TIC216D-S?

    • It is important to ensure that the gate current and voltage meet the specifications outlined in the datasheet to guarantee proper and reliable operation of the TIC216D-S.