Bourns Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TISP4C020L1NR-S
Näytä Yksityiskohdat DataSheets

TISP4C020L1NR-S

Introduction

The TISP4C020L1NR-S belongs to the category of surge protection devices and is commonly used to protect sensitive electronic equipment from voltage transients. This entry provides an overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Surge Protection Device
  • Use: Protecting sensitive electronic equipment from voltage transients
  • Characteristics: High surge current capability, low capacitance, fast response time
  • Package: SOT-23-6 package
  • Essence: Provides robust protection against transient overvoltage events
  • Packaging/Quantity: Available in reels with a quantity of 3000 units per reel

Specifications

  • Maximum Working Voltage: 24 V
  • Breakdown Voltage: 30 V
  • Holding Current: 150 mA
  • Surge Current Capability: 100 A (8/20 µs)
  • Capacitance: 3 pF (typical)
  • Response Time: < 1 ns

Detailed Pin Configuration

The TISP4C020L1NR-S has a SOT-23-6 package with the following pin configuration: 1. Pin 1: Cathode 2. Pin 2: Anode 3. Pin 3: Not Connected 4. Pin 4: Not Connected 5. Pin 5: Cathode 6. Pin 6: Anode

Functional Features

  • Robust surge protection
  • Low capacitance for minimal signal distortion
  • Fast response time for rapid protection activation

Advantages and Disadvantages

Advantages

  • High surge current capability
  • Low capacitance
  • Fast response time
  • Compact SOT-23-6 package

Disadvantages

  • Limited maximum working voltage of 24 V

Working Principles

The TISP4C020L1NR-S operates based on the principle of diverting excessive surge currents away from sensitive electronic components by providing a low-impedance path to ground during overvoltage events. This helps to protect the connected equipment from damage caused by transient voltage spikes.

Detailed Application Field Plans

The TISP4C020L1NR-S is suitable for a wide range of applications, including: - Telecommunication equipment - Data lines - Industrial control systems - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the TISP4C020L1NR-S include: - TISP4011H3BJR-S - TISP4180H3BJR-S - TISP4240H3BJR-S - TISP61089ADR-S - TISP61089BDR-S

In conclusion, the TISP4C020L1NR-S surge protection device offers robust protection against transient overvoltage events, making it an essential component for safeguarding sensitive electronic equipment across various industries.

[Word count: 414]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TISP4C020L1NR-S :n soveltamiseen teknisissä ratkaisuissa

  1. What is the TISP4C020L1NR-S?

    • The TISP4C020L1NR-S is a highly reliable, low capacitance silicon surge protector designed to protect sensitive electronics from voltage transients induced by lightning and other transient voltage events.

  2. What are the key features of the TISP4C020L1NR-S?

    • The key features include low capacitance, high surge current capability, low clamping voltage, and compatibility with various communication interfaces.

  3. How does the TISP4C020L1NR-S protect electronic devices?

    • It diverts excess energy away from the protected equipment by providing a low-impedance path to ground, thereby limiting the voltage that reaches the sensitive components.

  4. In what applications can the TISP4C020L1NR-S be used?

    • It is commonly used in telecommunications equipment, network interface devices, industrial control systems, and other applications requiring protection from transient voltage events.

  5. What is the maximum surge current handling capability of the TISP4C020L1NR-S?

    • The TISP4C020L1NR-S can handle surge currents up to 100A (8/20 µs).

  6. What is the typical clamping voltage of the TISP4C020L1NR-S?

    • The typical clamping voltage is low, typically around 30V at 100A.

  7. Is the TISP4C020L1NR-S compatible with standard communication interfaces?

    • Yes, it is compatible with various communication interfaces such as Ethernet, RS-485, and CAN bus.

  8. What is the operating temperature range of the TISP4C020L1NR-S?

    • The operating temperature range is typically from -40°C to 125°C, making it suitable for a wide range of environments.

  9. Does the TISP4C020L1NR-S require any external components for proper operation?

    • No, it does not require any external components and can be directly connected to the protected circuit.

  10. Are there any application notes or guidelines available for using the TISP4C020L1NR-S in technical solutions?

    • Yes, detailed application notes and guidelines are provided in the product datasheet and application documents, offering valuable insights into integrating the device into various technical solutions.