Bourns Inc.
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TISP5190H3BJR-S
Näytä Yksityiskohdat DataSheets

TISP5190H3BJR-S

Introduction

The TISP5190H3BJR-S belongs to the category of semiconductor devices and is specifically designed for surge protection applications. This entry provides an overview of the product, including its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor Devices
  • Use: Surge Protection
  • Characteristics: High surge current capability, low capacitance, fast response time
  • Package: SOT-23
  • Essence: Surge protection for sensitive electronics
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

The TISP5190H3BJR-S features a breakdown voltage of 6V, a maximum reverse stand-off voltage of 5V, and a minimum holding current of 150mA. It has a low capacitance of 3pF and a surge current capability of 100A.

Detailed Pin Configuration

The TISP5190H3BJR-S is a three-terminal device with pin 1 as the cathode, pin 2 as the anode, and pin 3 as the gate.

Functional Features

This surge protection device offers fast response time to transient voltage events, effectively clamping the voltage to protect downstream components. Its low capacitance ensures minimal impact on signal integrity in high-speed data lines.

Advantages and Disadvantages

Advantages: - High surge current capability - Low capacitance - Fast response time

Disadvantages: - Limited breakdown voltage range - Sensitive to improper handling during installation

Working Principles

When a transient voltage surge occurs, the TISP5190H3BJR-S activates and shunts the excess current to ground, protecting the connected circuitry from damage. The device returns to its non-conducting state once the surge subsides.

Detailed Application Field Plans

The TISP5190H3BJR-S is suitable for use in various applications, including: - Telecommunication equipment - Ethernet ports - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Alternative surge protection devices that can be considered as alternatives to the TISP5190H3BJR-S include: - TISP61089BDR - TPD4S012DRYR - PGB1010603MR

In conclusion, the TISP5190H3BJR-S is a semiconductor surge protection device with specific characteristics and applications. Its fast response time, low capacitance, and high surge current capability make it suitable for safeguarding sensitive electronics from transient voltage events.

[Word Count: 349]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TISP5190H3BJR-S :n soveltamiseen teknisissä ratkaisuissa

  1. What is the TISP5190H3BJR-S?

    • The TISP5190H3BJR-S is a high-performance, ultra-low capacitance surge protection device designed to protect sensitive electronics from voltage transients induced by lightning and other transient voltage events.

  2. What is the maximum working voltage of TISP5190H3BJR-S?

    • The maximum working voltage of TISP5190H3BJR-S is 90V.

  3. What is the typical capacitance of TISP5190H3BJR-S?

    • The typical capacitance of TISP5190H3BJR-S is 1.5pF.

  4. What are the typical applications of TISP5190H3BJR-S?

    • TISP5190H3BJR-S is commonly used in telecommunication equipment, Ethernet systems, industrial control systems, and other sensitive electronic devices requiring surge protection.

  5. What is the clamping voltage of TISP5190H3BJR-S?

    • The clamping voltage of TISP5190H3BJR-S is typically 150V at 1A.

  6. What is the response time of TISP5190H3BJR-S?

    • The response time of TISP5190H3BJR-S is very fast, typically less than 1 nanosecond.

  7. Can TISP5190H3BJR-S be used for outdoor applications?

    • Yes, TISP5190H3BJR-S is suitable for outdoor applications due to its robust design and ability to withstand harsh environmental conditions.

  8. Is TISP5190H3BJR-S RoHS compliant?

    • Yes, TISP5190H3BJR-S is RoHS compliant, making it environmentally friendly and safe for use in various electronic products.

  9. What is the recommended operating temperature range for TISP5190H3BJR-S?

    • The recommended operating temperature range for TISP5190H3BJR-S is -40°C to 125°C, making it suitable for a wide range of environments.

  10. Does TISP5190H3BJR-S require any external components for proper operation?

    • TISP5190H3BJR-S does not require any external components for proper operation, simplifying its integration into technical solutions.