Katso tuotteen tekniset tiedot.
BCM53212MKPBG
Product Overview
Category: Integrated Circuit (IC)
Use: Ethernet Switch
Characteristics: - High-performance Ethernet switch - Low power consumption - Small form factor - Advanced features for network management and security
Package: MKPBG (Multi-Chip Package Ball Grid Array)
Essence: The BCM53212MKPBG is a highly integrated Ethernet switch designed for use in various networking applications. It offers advanced features, low power consumption, and a compact form factor.
Packaging/Quantity: The BCM53212MKPBG is available in a Multi-Chip Package Ball Grid Array (MKPBG) format. The quantity may vary depending on the supplier.
Specifications
- Number of Ports: 12
- Speed: 10/100 Mbps
- Standards: IEEE 802.3, IEEE 802.3u
- Power Supply: 3.3V
- Operating Temperature: -40°C to +85°C
- Package Dimensions: 12mm x 12mm
Detailed Pin Configuration
The BCM53212MKPBG has a specific pin configuration that enables connectivity and communication with other components. Please refer to the datasheet or technical documentation provided by the manufacturer for detailed pin configuration information.
Functional Features
- VLAN support for network segmentation
- Quality of Service (QoS) prioritization
- Spanning Tree Protocol (STP) for loop prevention
- Link Aggregation for increased bandwidth
- Port Mirroring for network monitoring
- Secure authentication and access control
- Energy-efficient Ethernet (EEE) support
Advantages and Disadvantages
Advantages: - High-performance switching capabilities - Advanced features for network management and security - Compact form factor - Low power consumption
Disadvantages: - Limited number of ports (12) - Limited speed (10/100 Mbps)
Working Principles
The BCM53212MKPBG operates based on the principles of Ethernet switching. It receives incoming data packets, examines their destination addresses, and forwards them to the appropriate ports. The switch uses its internal memory and logic to make forwarding decisions quickly and efficiently.
Detailed Application Field Plans
The BCM53212MKPBG is suitable for various networking applications, including: - Small office/home office (SOHO) networks - Industrial automation systems - Internet of Things (IoT) devices - Smart home networks - Embedded systems
Detailed and Complete Alternative Models
- BCM53202MKPBG: Similar to BCM53212MKPBG but with 2 ports instead of 12.
- BCM53222MKPBG: Similar to BCM53212MKPBG but with 22 ports instead of 12.
- BCM53242MKPBG: Similar to BCM53212MKPBG but with 42 ports instead of 12.
These alternative models offer different port configurations to suit specific networking requirements.
Note: The above information is provided as a general overview. For detailed technical specifications and up-to-date information, please refer to the datasheet or technical documentation provided by the manufacturer.
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät BCM53212MKPBG :n soveltamiseen teknisissä ratkaisuissa
Sure! Here are 10 common questions and answers related to the application of BCM53212MKPBG in technical solutions:
Q: What is BCM53212MKPBG? A: BCM53212MKPBG is a multi-port Ethernet switch IC (Integrated Circuit) developed by Broadcom.
Q: What are the key features of BCM53212MKPBG? A: Some key features of BCM53212MKPBG include 12 ports, support for Gigabit Ethernet, VLAN (Virtual Local Area Network) support, and QoS (Quality of Service) capabilities.
Q: What is the typical application of BCM53212MKPBG? A: BCM53212MKPBG is commonly used in networking equipment such as routers, switches, and access points to enable high-speed data transfer and network management.
Q: Can BCM53212MKPBG be used in industrial applications? A: Yes, BCM53212MKPBG is suitable for industrial applications due to its robust design, wide temperature range support, and reliability.
Q: Does BCM53212MKPBG support Power over Ethernet (PoE)? A: No, BCM53212MKPBG does not have built-in PoE support. However, it can be used alongside external PoE injectors or switches to power PoE-enabled devices.
Q: Is BCM53212MKPBG compatible with IPv6? A: Yes, BCM53212MKPBG supports IPv6, making it future-proof and capable of handling the transition from IPv4 to IPv6 networks.
Q: Can BCM53212MKPBG be used in stackable configurations? A: Yes, BCM53212MKPBG can be used in stackable configurations to expand the number of ports and enhance network scalability.
Q: What is the power consumption of BCM53212MKPBG? A: The power consumption of BCM53212MKPBG varies depending on the operating conditions, but it typically falls within a certain range specified in the datasheet.
Q: Does BCM53212MKPBG support advanced security features? A: Yes, BCM53212MKPBG offers various security features such as MAC address filtering, port-based access control, and IEEE 802.1X authentication.
Q: Is BCM53212MKPBG suitable for small-scale deployments? A: Yes, BCM53212MKPBG is suitable for small-scale deployments due to its compact size, low power consumption, and cost-effectiveness.
Please note that these answers are general and may vary based on specific product versions or configurations. It's always recommended to refer to the official documentation or consult with the manufacturer for accurate information.