Comchip Technology
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
P4KE16CA-G
Näytä Yksityiskohdat DataSheets

P4KE16CA-G: Product Overview and Detailed Information

Introduction

The P4KE16CA-G is a crucial component in the field of electronics, specifically within the category of transient voltage suppressor diodes. This entry will provide an in-depth overview of the product, including its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protecting electronic circuits from overvoltage transients
  • Characteristics: Fast response time, high surge capability, low clamping voltage
  • Package: DO-41
  • Essence: Safeguarding sensitive electronic components from voltage spikes
  • Packaging/Quantity: Typically available in reels or bulk packaging

Specifications

  • Part Number: P4KE16CA-G
  • Peak Pulse Power: 400W
  • Breakdown Voltage Range: 15.3V to 17V
  • Maximum Clamping Voltage: 25.2V at 1A
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The P4KE16CA-G follows the standard DO-41 package configuration, with two leads for connection.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient overvoltages to a safe level
  • Fast Response Time: Rapid reaction to voltage spikes, protecting downstream components
  • High Surge Capability: Able to withstand large surge currents without degradation

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time ensures minimal impact on the circuit
  • High surge capability provides robust protection

Disadvantages

  • Can introduce some capacitance to the circuit
  • May require careful consideration of layout and placement for optimal performance

Working Principles

The P4KE16CA-G operates by diverting excess voltage away from sensitive components when a transient overvoltage event occurs. It achieves this through a combination of avalanche breakdown and clamping action, effectively limiting the voltage across the protected circuit.

Detailed Application Field Plans

The P4KE16CA-G finds extensive use in various electronic systems, including: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • P4KE6.8CA-G: Lower breakdown voltage variant
  • P4KE30CA-G: Higher breakdown voltage variant
  • P6KE16CA-G: Axial lead package alternative

In conclusion, the P4KE16CA-G plays a vital role in safeguarding electronic circuits from damaging voltage transients. Its fast response time, high surge capability, and effective transient voltage suppression make it a valuable component in a wide range of applications.

Word Count: 410

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät P4KE16CA-G :n soveltamiseen teknisissä ratkaisuissa

Sure, here are 10 common questions and answers related to the application of P4KE16CA-G in technical solutions:

  1. What is the voltage rating of P4KE16CA-G?

    • The voltage rating of P4KE16CA-G is 16V.

  2. What is the peak power dissipation of P4KE16CA-G?

    • The peak power dissipation of P4KE16CA-G is 400W.

  3. What is the typical application of P4KE16CA-G?

    • P4KE16CA-G is commonly used for transient voltage suppression in electronic circuits to protect sensitive components from voltage spikes.

  4. What is the breakdown voltage of P4KE16CA-G?

    • The breakdown voltage of P4KE16CA-G is typically 17.8V.

  5. What is the maximum clamping voltage of P4KE16CA-G?

    • The maximum clamping voltage of P4KE16CA-G is 29.2V at 10A.

  6. What is the operating temperature range of P4KE16CA-G?

    • P4KE16CA-G can operate within a temperature range of -55°C to 175°C.

  7. Is P4KE16CA-G suitable for automotive applications?

    • Yes, P4KE16CA-G is suitable for automotive applications due to its robust construction and ability to withstand transient voltage events.

  8. Can P4KE16CA-G be used for overvoltage protection in power supplies?

    • Yes, P4KE16CA-G is commonly used for overvoltage protection in power supplies to safeguard sensitive components from voltage surges.

  9. What package type does P4KE16CA-G come in?

    • P4KE16CA-G is available in a DO-41 axial leaded package.

  10. What are the key advantages of using P4KE16CA-G in technical solutions?

    • The key advantages of using P4KE16CA-G include its high surge capability, fast response time, and reliability in suppressing transient voltages.

I hope this information is helpful! Let me know if you need further assistance.