Cypress Semiconductor Corp
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MB95F282KPF-G-SNE1
Näytä Yksityiskohdat DataSheets

MB95F282KPF-G-SNE1

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, consumer electronics
  • Characteristics: High-performance, low-power consumption, compact size
  • Package: QFP (Quad Flat Package)
  • Essence: Advanced microcontroller with integrated peripherals
  • Packaging/Quantity: Tray packaging, available in bulk quantities

Specifications

  • Microcontroller Type: 8-bit
  • CPU Speed: 16 MHz
  • Flash Memory: 32 KB
  • RAM: 2 KB
  • Operating Voltage: 2.7V - 5.5V
  • I/O Pins: 28
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter: 10-bit, 8 channels
  • Timers/Counters: 2 x 8-bit, 1 x 16-bit
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MB95F282KPF-G-SNE1 microcontroller has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD: Power supply voltage input
  2. P00: General-purpose I/O pin
  3. P01: General-purpose I/O pin
  4. P02: General-purpose I/O pin
  5. P03: General-purpose I/O pin
  6. P04: General-purpose I/O pin
  7. P05: General-purpose I/O pin
  8. P06: General-purpose I/O pin
  9. P07: General-purpose I/O pin
  10. P10: General-purpose I/O pin
  11. P11: General-purpose I/O pin
  12. P12: General-purpose I/O pin
  13. P13: General-purpose I/O pin
  14. P14: General-purpose I/O pin
  15. P15: General-purpose I/O pin
  16. P16: General-purpose I/O pin
  17. P17: General-purpose I/O pin
  18. P20: General-purpose I/O pin
  19. P21: General-purpose I/O pin
  20. P22: General-purpose I/O pin
  21. P23: General-purpose I/O pin
  22. P24: General-purpose I/O pin
  23. P25: General-purpose I/O pin
  24. P26: General-purpose I/O pin
  25. P27: General-purpose I/O pin
  26. RESET: Reset pin
  27. VSS: Ground
  28. XTAL: Crystal oscillator input

Functional Features

  • High-performance 8-bit microcontroller with integrated peripherals
  • Low-power consumption for energy-efficient applications
  • Compact size suitable for space-constrained designs
  • Wide operating voltage range for flexibility in power supply options
  • Multiple communication interfaces (UART, SPI, I2C) for seamless connectivity
  • Analog-to-Digital Converter for precise analog signal measurements
  • Timers/Counters for accurate timing and event counting

Advantages and Disadvantages

Advantages

  • Powerful processing capabilities for demanding applications
  • Efficient power management for extended battery life
  • Small form factor enables compact device designs
  • Versatile communication interfaces facilitate easy integration
  • Precise analog measurements for sensor-based applications
  • Accurate timing and event handling for time-critical tasks

Disadvantages

  • Limited flash memory and RAM capacity compared to higher-end microcontrollers
  • Restricted number of I/O pins may limit the number of external devices that can be connected simultaneously

Working Principles

The MB95F282KPF-G-SNE1 microcontroller operates based on the Von Neumann architecture. It consists of a central processing unit (CPU), memory, and various integrated peripherals. The CPU executes instructions stored in the flash memory, interacts with external devices through I/O pins, and communicates with other devices using the available interfaces.

The microcontroller's working principle involves fetching instructions from memory, decoding them, and executing the corresponding operations. It can perform tasks such as data processing, controlling external devices, and managing communication protocols.

Detailed Application Field Plans

The MB95F282KPF-G-SNE1 microcontroller finds applications in various fields, including:

  1. Embedded Systems: Used in industrial automation, robotics, and control systems.
  2. IoT Devices: Enables connectivity and control in smart home devices, wearables, and environmental monitoring systems.
  3. Consumer Electronics: Powers appliances, audio/video equipment, and gaming consoles.
  4. Automotive: Controls vehicle subsystems, such as engine management, infotainment systems, and driver assistance features.
  5. Medical Devices: Used in medical equipment for diagnostics, monitoring, and treatment purposes.

Detailed and Complete Alternative Models

  • MB95F282

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MB95F282KPF-G-SNE1 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of MB95F282KPF-G-SNE1 in technical solutions:

Q1: What is the MB95F282KPF-G-SNE1 microcontroller used for? A1: The MB95F282KPF-G-SNE1 microcontroller is commonly used for various technical solutions, including industrial automation, consumer electronics, automotive applications, and more.

Q2: What is the operating voltage range of the MB95F282KPF-G-SNE1? A2: The MB95F282KPF-G-SNE1 operates within a voltage range of 2.7V to 5.5V.

Q3: How much flash memory does the MB95F282KPF-G-SNE1 have? A3: The MB95F282KPF-G-SNE1 microcontroller has 32KB of flash memory.

Q4: Can I use the MB95F282KPF-G-SNE1 for real-time control applications? A4: Yes, the MB95F282KPF-G-SNE1 is suitable for real-time control applications due to its high-performance CPU and integrated peripherals.

Q5: Does the MB95F282KPF-G-SNE1 support communication protocols like UART, SPI, and I2C? A5: Yes, the MB95F282KPF-G-SNE1 supports UART, SPI, and I2C communication protocols, making it versatile for various connectivity requirements.

Q6: What is the maximum clock frequency of the MB95F282KPF-G-SNE1? A6: The MB95F282KPF-G-SNE1 can operate at a maximum clock frequency of 20MHz.

Q7: Can I use the MB95F282KPF-G-SNE1 for motor control applications? A7: Yes, the MB95F282KPF-G-SNE1 has built-in PWM channels and timers, making it suitable for motor control applications.

Q8: Does the MB95F282KPF-G-SNE1 have analog-to-digital converters (ADC)? A8: Yes, the MB95F282KPF-G-SNE1 has a 10-bit ADC with multiple channels for analog signal conversion.

Q9: Is the MB95F282KPF-G-SNE1 compatible with development tools like IDEs and debuggers? A9: Yes, the MB95F282KPF-G-SNE1 is compatible with various development tools, including IDEs, debuggers, and programming software.

Q10: Can I use the MB95F282KPF-G-SNE1 in low-power applications? A10: Yes, the MB95F282KPF-G-SNE1 offers low-power modes and features to optimize power consumption, making it suitable for low-power applications.

Please note that these answers are general and may vary depending on specific requirements and application scenarios.