The S34MS04G204TFI010 has the following pin configuration:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power supply voltage input | | 2 | GND | Ground | | 3 | HOLD | Suspends ongoing program or erase operation | | 4 | WP | Write protect | | 5 | SCK | Serial clock input | | 6 | SI | Serial data input | | 7 | SO | Serial data output | | 8 | CS | Chip select |
The S34MS04G204TFI010 is based on flash memory technology. It uses a floating gate transistor structure to store data. The memory cells are organized into sectors, and each sector can be individually erased or programmed. Data is stored by trapping electrons in the floating gate, which alters the threshold voltage of the transistor. This allows for non-volatile storage of information.
The S34MS04G204TFI010 is widely used in various electronic devices that require data storage and retrieval capabilities. Some common application fields include: - Consumer electronics (e.g., smartphones, tablets, digital cameras) - Automotive systems (e.g., infotainment systems, navigation systems) - Industrial equipment (e.g., control systems, data loggers) - Networking devices (e.g., routers, switches)
(Note: These alternative models have different capacities but share the same specifications as the S34MS04G204TFI010.)
This concludes the encyclopedia entry for the S34MS04G204TFI010 memory product.
Sure! Here are 10 common questions and answers related to the application of S34MS04G204TFI010 in technical solutions:
Q: What is S34MS04G204TFI010? A: S34MS04G204TFI010 is a specific model of NAND flash memory chip manufactured by a company called Cypress Semiconductor.
Q: What is the storage capacity of S34MS04G204TFI010? A: The S34MS04G204TFI010 has a storage capacity of 4 gigabytes (GB).
Q: What is the interface used by S34MS04G204TFI010? A: S34MS04G204TFI010 uses a standard NAND flash interface, such as the ONFI (Open NAND Flash Interface) or Toggle Mode interface.
Q: What are some typical applications of S34MS04G204TFI010? A: S34MS04G204TFI010 is commonly used in various technical solutions, including embedded systems, solid-state drives (SSDs), industrial automation, automotive electronics, and consumer electronics.
Q: What is the operating voltage range for S34MS04G204TFI010? A: The operating voltage range for S34MS04G204TFI010 is typically between 2.7V and 3.6V.
Q: What is the maximum data transfer rate supported by S34MS04G204TFI010? A: S34MS04G204TFI010 supports high-speed data transfer rates, with a maximum read speed of up to 200 megabytes per second (MB/s) and a maximum write speed of up to 100 MB/s.
Q: Does S34MS04G204TFI010 support wear-leveling and error correction? A: Yes, S34MS04G204TFI010 incorporates wear-leveling algorithms and error correction codes (ECC) to enhance data reliability and extend the lifespan of the flash memory.
Q: Can S34MS04G204TFI010 operate in extreme temperature conditions? A: Yes, S34MS04G204TFI010 is designed to operate reliably in a wide range of temperatures, typically from -40°C to 85°C.
Q: Is S34MS04G204TFI010 compatible with different operating systems? A: Yes, S34MS04G204TFI010 is compatible with various operating systems, including Windows, Linux, and embedded real-time operating systems (RTOS).
Q: Are there any specific programming requirements for S34MS04G204TFI010? A: S34MS04G204TFI010 requires specific programming commands and protocols, which can be found in the datasheet provided by Cypress Semiconductor. It is important to follow the recommended programming guidelines for optimal performance and reliability.
Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of the technical solution.