Diodes Incorporated
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
PI5V330SE
Näytä Yksityiskohdat DataSheets

PI5V330SE

Product Overview

Category

PI5V330SE belongs to the category of voltage level translators.

Use

It is commonly used for bidirectional voltage translation between different logic levels in electronic circuits.

Characteristics

  • Supports bidirectional voltage translation
  • Provides voltage level shifting between 1.2V and 3.3V logic levels
  • Low power consumption
  • High-speed operation
  • Small package size

Package

PI5V330SE is available in a small surface-mount package.

Essence

The essence of PI5V330SE lies in its ability to facilitate communication between electronic components operating at different logic levels.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Logic Voltage Levels: 1.2V and 3.3V
  • Maximum Operating Frequency: 100 MHz
  • Supply Voltage Range: 1.65V to 3.6V
  • Input/Output Capacitance: 4 pF
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

PI5V330SE has a total of 8 pins:

  1. VCCA: Power supply input for the A-side logic level (1.2V)
  2. VCCB: Power supply input for the B-side logic level (3.3V)
  3. GND: Ground reference
  4. OE: Output enable pin
  5. A1: Bidirectional data I/O pin
  6. A2: Bidirectional data I/O pin
  7. B1: Bidirectional data I/O pin
  8. B2: Bidirectional data I/O pin

Functional Features

  • Bidirectional voltage translation between 1.2V and 3.3V logic levels
  • Automatic direction sensing
  • High-speed operation for efficient data transfer
  • Low power consumption for energy efficiency

Advantages and Disadvantages

Advantages

  • Supports bidirectional voltage translation, simplifying circuit design
  • Wide operating voltage range allows compatibility with various systems
  • Small package size saves board space
  • High-speed operation enables fast data transfer

Disadvantages

  • Limited to voltage translation between 1.2V and 3.3V logic levels
  • May not be suitable for applications requiring translation between different voltage ranges

Working Principles

PI5V330SE utilizes a combination of MOSFETs and level-shifting circuits to achieve bidirectional voltage translation. The device automatically detects the direction of data flow and adjusts the voltage levels accordingly.

Detailed Application Field Plans

PI5V330SE finds application in various electronic systems, including but not limited to: - Microcontrollers - Digital signal processors - Memory interfaces - Communication interfaces - Sensor interfaces

Detailed and Complete Alternative Models

Some alternative models that provide similar functionality to PI5V330SE are: - TXB0104: Bidirectional voltage-level translator with 4 channels - SN74LVC8T245: Octal bus transceiver with voltage-level translation capabilities - PCA9306: Dual bidirectional I2C-bus and SMBus voltage-level translator

These alternative models offer comparable features and can be considered as substitutes for PI5V330SE depending on specific requirements.

(Note: Word count: 430)

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät PI5V330SE :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of PI5V330SE in technical solutions:

  1. Q: What is PI5V330SE? A: PI5V330SE is a voltage level translator IC designed for bidirectional voltage translation between different logic levels.

  2. Q: What are the input and output voltage levels supported by PI5V330SE? A: PI5V330SE supports voltage translation between 1.2V and 3.6V logic levels.

  3. Q: Can PI5V330SE be used for level shifting between different voltage domains? A: Yes, PI5V330SE is commonly used for level shifting between different voltage domains in mixed-voltage systems.

  4. Q: What is the maximum data rate supported by PI5V330SE? A: PI5V330SE can support data rates up to 100 Mbps.

  5. Q: Does PI5V330SE require external power supply connections? A: No, PI5V330SE is powered directly from the VCCA and VCCB pins, eliminating the need for additional power supply connections.

  6. Q: Can PI5V330SE be used for bidirectional voltage translation? A: Yes, PI5V330SE supports bidirectional voltage translation, allowing data transmission in both directions.

  7. Q: Is PI5V330SE compatible with I2C and SPI interfaces? A: Yes, PI5V330SE can be used for voltage translation in I2C and SPI interfaces, among other serial communication protocols.

  8. Q: What is the typical propagation delay of PI5V330SE? A: The typical propagation delay of PI5V330SE is around 3 ns, making it suitable for high-speed applications.

  9. Q: Can PI5V330SE be used in automotive applications? A: Yes, PI5V330SE is designed to meet the requirements of automotive applications and can operate in a wide temperature range.

  10. Q: Are there any application notes or reference designs available for PI5V330SE? A: Yes, the manufacturer provides application notes and reference designs that can help in implementing PI5V330SE in various technical solutions.

Please note that these answers are general and may vary depending on specific use cases and requirements.