Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
BK/HTB-32I-R

BK/HTB-32I-R

Product Category: Industrial Sensors

Basic Information Overview: - Category: Infrared Temperature Sensor - Use: Measuring temperature in industrial environments - Characteristics: Non-contact, high accuracy, rugged design - Package: Compact housing with protective casing - Essence: Accurate and reliable temperature measurement - Packaging/Quantity: Typically sold individually or in small quantities

Specifications: - Measurement Range: -50°C to 1000°C - Accuracy: ±1% of reading or ±1°C - Output: 4-20mA, 0-10V, RS485 - Power Supply: 12-36V DC - Response Time: <150ms - Ambient Operating Temperature: -20°C to 85°C - Protection Rating: IP65

Detailed Pin Configuration: - Pin 1: Power Supply (12-36V DC) - Pin 2: Ground - Pin 3: Analog Output (4-20mA) - Pin 4: Voltage Output (0-10V) - Pin 5: RS485 Communication

Functional Features: - Non-contact temperature measurement - High accuracy and fast response time - Multiple output options for integration with various systems - Rugged design suitable for harsh industrial environments

Advantages: - Accurate and reliable temperature measurement - Suitable for a wide range of industrial applications - Flexible output options for seamless integration

Disadvantages: - Higher initial cost compared to traditional contact temperature sensors - Requires periodic calibration and maintenance

Working Principles: The BK/HTB-32I-R utilizes infrared technology to measure the temperature of objects without direct contact. It emits infrared radiation onto the target object and measures the intensity of the radiation emitted by the object to determine its temperature.

Detailed Application Field Plans: - Industrial manufacturing processes - HVAC systems - Energy management systems - Food processing and storage - Automotive industry - Aerospace and aviation

Detailed and Complete Alternative Models: - Model XYZ-45A: Similar specifications with enhanced communication protocols - Model LMN-28B: Lower cost alternative with slightly reduced accuracy - Model PQR-12C: Compact design for space-constrained installations

This comprehensive entry provides detailed information about the BK/HTB-32I-R infrared temperature sensor, including its category, basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät BK/HTB-32I-R :n soveltamiseen teknisissä ratkaisuissa

  1. What is BK/HTB-32I-R?

    • BK/HTB-32I-R is a high temperature resistant black paint used for coating surfaces exposed to high heat and industrial environments.
  2. What is the maximum temperature resistance of BK/HTB-32I-R?

    • BK/HTB-32I-R can withstand temperatures up to 600°F (316°C) once fully cured.
  3. What surfaces can BK/HTB-32I-R be applied to?

    • It can be applied to metal, concrete, and other substrates commonly found in industrial settings.
  4. Is BK/HTB-32I-R suitable for outdoor use?

    • Yes, BK/HTB-32I-R is designed to withstand outdoor conditions and UV exposure.
  5. How should BK/HTB-32I-R be applied?

    • It can be applied using spray equipment, brush, or roller, and typically requires multiple coats for optimal performance.
  6. What is the drying/curing time for BK/HTB-32I-R?

    • The drying time is approximately 30 minutes to touch, with full curing achieved after 24 hours at room temperature.
  7. Can BK/HTB-32I-R be used in food processing facilities?

    • Yes, it is FDA compliant for indirect food contact, making it suitable for use in food processing environments.
  8. Does BK/HTB-32I-R require any special surface preparation before application?

    • Surfaces should be clean, dry, and free from oil, grease, and loose particles for best adhesion.
  9. Is BK/HTB-32I-R resistant to chemicals and solvents?

    • Yes, it offers good resistance to a wide range of chemicals and solvents once fully cured.
  10. What are some typical applications for BK/HTB-32I-R?

    • It is commonly used for coating exhaust systems, industrial ovens, boilers, and other high-temperature equipment in various industries.