EPC
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
EPC2039ENGRT
Näytä Yksityiskohdat DataSheets

EPC2039ENGRT Product Encyclopedia Entry

Product Overview

Belongs to

EPC2039ENGRT belongs to the category of electronic components.

Basic Information

  • Category: Electronic component
  • Use: Power management
  • Characteristics: High efficiency, compact size
  • Package: SMD (Surface Mount Device)
  • Essence: Efficient power regulation and management
  • Packaging/Quantity: Typically packaged in reels of 2500 units

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.6V to 5V
  • Maximum Output Current: 3A
  • Switching Frequency: 2MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input voltage)
  2. GND (Ground)
  3. SW (Switch node)
  4. FB (Feedback)
  5. EN (Enable)

Functional Features

  • High efficiency synchronous buck regulator
  • Integrated high-side and low-side power MOSFETs
  • Wide input voltage range for versatility
  • Adjustable output voltage
  • Overcurrent and thermal protection

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power dissipation
  • Compact size allows for space-saving designs
  • Wide input voltage range enhances flexibility in applications

Disadvantages

  • Higher cost compared to non-synchronous regulators
  • Sensitive to layout and external component selection

Working Principles

EPC2039ENGRT operates as a synchronous buck regulator, converting higher input voltages to lower output voltages with high efficiency. The integrated MOSFETs enable efficient power conversion while the control circuitry ensures stable and accurate output voltage regulation.

Detailed Application Field Plans

The EPC2039ENGRT is well-suited for various applications including: - Portable electronic devices - Industrial automation systems - Automotive electronics - LED lighting systems - Distributed power supplies

Detailed and Complete Alternative Models

Some alternative models to EPC2039ENGRT include: - EPC2040ENGRT - EPC2038ENGRT - EPC2041ENGRT

This completes the encyclopedia entry for EPC2039ENGRT, providing comprehensive information about its product details, specifications, features, and application scenarios.

[Word count: 328]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät EPC2039ENGRT :n soveltamiseen teknisissä ratkaisuissa

Sure, here are 10 common questions and answers related to the application of EPC2039ENGRT in technical solutions:

  1. What is EPC2039ENGRT?

    • EPC2039ENGRT is a high-performance engineering plastic material known for its excellent mechanical properties and chemical resistance.

  2. What are the key properties of EPC2039ENGRT?

    • EPC2039ENGRT exhibits high strength, stiffness, and dimensional stability, along with resistance to chemicals, heat, and wear.

  3. In what technical applications can EPC2039ENGRT be used?

    • EPC2039ENGRT is commonly used in technical applications such as automotive components, industrial machinery parts, electrical insulators, and medical devices.

  4. How does EPC2039ENGRT compare to other engineering plastics?

    • EPC2039ENGRT offers superior mechanical properties and chemical resistance compared to many other engineering plastics, making it suitable for demanding technical solutions.

  5. What are the temperature limits for EPC2039ENGRT?

    • EPC2039ENGRT can typically withstand continuous use at temperatures up to 120°C (248°F) and short-term exposure to higher temperatures.

  6. Is EPC2039ENGRT suitable for outdoor applications?

    • Yes, EPC2039ENGRT is UV resistant and can be used in outdoor applications without significant degradation over time.

  7. Can EPC2039ENGRT be machined or fabricated easily?

    • Yes, EPC2039ENGRT can be machined, drilled, turned, and milled using standard metalworking equipment, making it suitable for various fabrication processes.

  8. Does EPC2039ENGRT require any special handling or storage considerations?

    • EPC2039ENGRT should be stored in a cool, dry place away from direct sunlight and moisture to prevent any potential degradation.

  9. Are there any specific design considerations when using EPC2039ENGRT in technical solutions?

    • Designers should consider the material's high stiffness and dimensional stability when designing parts to ensure proper fit and function.

  10. What are the potential cost benefits of using EPC2039ENGRT in technical solutions?

    • While EPC2039ENGRT may have a higher initial cost than some other materials, its durability and performance can lead to long-term cost savings through reduced maintenance and replacement needs.

I hope these questions and answers provide a good overview of the application of EPC2039ENGRT in technical solutions. Let me know if you need further information on any specific aspect!