Exar Corporation
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SP232EEN-L
Näytä Yksityiskohdat DataSheets

SP232EEN-L

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Processing and Communication
  • Characteristics:
    • High-speed, low-power dual RS-232 transceiver
    • Supports data rates up to 1 Mbps
    • Operates from a single 3.0V to 5.5V power supply
    • Compatible with EIA/TIA-232 and V.28/V.24 communication standards
  • Package: SOIC-16
  • Essence: The SP232EEN-L is a versatile IC that enables bidirectional serial communication between devices using the RS-232 protocol.
  • Packaging/Quantity: Available in tape and reel packaging, with 250 units per reel.

Specifications

  • Supply Voltage Range: 3.0V to 5.5V
  • Data Rate: Up to 1 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Channels: 2
  • Input/Output Type: CMOS/TTL compatible
  • ESD Protection: ±15kV (Human Body Model)

Detailed Pin Configuration

The SP232EEN-L features a 16-pin Small Outline Integrated Circuit (SOIC) package. The pin configuration is as follows:

  1. V+ (Positive Power Supply)
  2. C1- (Channel 1 Capacitor Negative Terminal)
  3. C1+ (Channel 1 Capacitor Positive Terminal)
  4. V- (Negative Power Supply)
  5. C2+ (Channel 2 Capacitor Positive Terminal)
  6. C2- (Channel 2 Capacitor Negative Terminal)
  7. GND (Ground)
  8. R1IN (Channel 1 Receiver Input)
  9. R1OUT (Channel 1 Receiver Output)
  10. T1IN (Channel 1 Transmitter Input)
  11. T1OUT (Channel 1 Transmitter Output)
  12. R2IN (Channel 2 Receiver Input)
  13. R2OUT (Channel 2 Receiver Output)
  14. T2IN (Channel 2 Transmitter Input)
  15. T2OUT (Channel 2 Transmitter Output)
  16. SHDN (Shutdown Control Input)

Functional Features

  • Dual RS-232 transceiver with integrated charge pump
  • Supports full-duplex communication
  • Low power consumption in shutdown mode
  • Automatic power-down when the cable is disconnected or idle
  • Enhanced ESD protection for robust operation

Advantages and Disadvantages

Advantages: - High-speed data transmission - Wide operating voltage range - Compact and easy-to-use package - Compatible with industry-standard communication protocols - Robust ESD protection

Disadvantages: - Limited to RS-232 communication, not suitable for other protocols - Requires external capacitors for proper operation - May require additional level shifting circuitry for interfacing with different logic levels

Working Principles

The SP232EEN-L utilizes a charge pump to generate the necessary voltage levels required for RS-232 communication. It converts the low-voltage CMOS/TTL signals from the microcontroller or other digital devices into RS-232 compatible levels, allowing reliable long-distance serial communication.

Detailed Application Field Plans

The SP232EEN-L is widely used in various applications that require RS-232 communication, including:

  1. Industrial automation systems
  2. Point-of-sale terminals
  3. Networking equipment
  4. Data acquisition systems
  5. Embedded systems
  6. Medical devices
  7. Test and measurement instruments

Detailed and Complete Alternative Models

  1. MAX232: Similar functionality and pin configuration, widely used in the industry.
  2. ADM3202: Higher data rate support and additional features, suitable for demanding applications.
  3. SP3232: Improved ESD protection and extended temperature range, ideal for harsh environments.

These alternative models offer similar functionality to the SP232EEN-L and can be considered as replacements based on specific requirements.

Word count: 450 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SP232EEN-L :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of SP232EEN-L in technical solutions:

  1. Q: What is SP232EEN-L? A: SP232EEN-L is a dual RS-232 line driver/receiver IC that is commonly used for serial communication in technical applications.

  2. Q: What is the operating voltage range of SP232EEN-L? A: The operating voltage range of SP232EEN-L is typically between 3V and 5.5V.

  3. Q: Can SP232EEN-L be used for both transmitting and receiving data? A: Yes, SP232EEN-L can be used as both a line driver (transmitter) and a line receiver.

  4. Q: What is the maximum data rate supported by SP232EEN-L? A: SP232EEN-L supports a maximum data rate of up to 120 kbps.

  5. Q: Does SP232EEN-L require external capacitors? A: Yes, SP232EEN-L requires external capacitors for charge pump operation. Refer to the datasheet for recommended values.

  6. Q: Can SP232EEN-L be used with different microcontrollers or microprocessors? A: Yes, SP232EEN-L is compatible with various microcontrollers and microprocessors that support RS-232 communication.

  7. Q: Is SP232EEN-L suitable for long-distance communication? A: SP232EEN-L is designed for short to medium-range communication (up to a few meters). For longer distances, additional measures like line drivers or repeaters may be required.

  8. Q: Can SP232EEN-L handle multiple devices on the same RS-232 bus? A: Yes, SP232EEN-L can be used in multi-drop configurations where multiple devices share the same RS-232 bus.

  9. Q: Does SP232EEN-L provide protection against electrostatic discharge (ESD)? A: Yes, SP232EEN-L provides ESD protection on its I/O pins, typically up to ±15 kV.

  10. Q: Are there any application notes or reference designs available for SP232EEN-L? A: Yes, the manufacturer of SP232EEN-L typically provides application notes and reference designs that can help with the implementation of the IC in various technical solutions. These resources can be found on their website or in the datasheet.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and consult the manufacturer's documentation for accurate and detailed information.