Exar Corporation
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SP7656EN2-L
Näytä Yksityiskohdat DataSheets

SP7656EN2-L

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: SOP-8
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 1.2V to 18V
  • Output Current: Up to 1.5A
  • Quiescent Current: 50µA (typical)
  • Switching Frequency: 500kHz (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SP7656EN2-L is an integrated circuit with a SOP-8 package. It has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. EN: Enable pin for turning the device on/off
  5. SW: Switching node pin
  6. NC: No connection pin
  7. NC: No connection pin
  8. VOUT: Output voltage pin

Functional Features

  • High efficiency power management solution
  • Low power consumption in standby mode
  • Wide input voltage range for versatile applications
  • Adjustable output voltage through feedback pin
  • Over-temperature protection
  • Short-circuit protection
  • Under-voltage lockout

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power dissipation
  • Compact SOP-8 package allows for space-saving designs
  • Wide input voltage range accommodates various power sources
  • Adjustable output voltage provides flexibility
  • Built-in protection features enhance reliability

Disadvantages

  • Limited output current compared to higher power devices
  • SOP-8 package may require additional thermal considerations for high-power applications

Working Principles

The SP7656EN2-L is a voltage regulator that utilizes a switching converter topology. It operates by continuously switching an internal power transistor on and off to regulate the output voltage. This switching action allows for efficient power conversion while maintaining a stable output voltage.

The device uses a feedback mechanism to compare the actual output voltage with a reference voltage. Any deviation from the desired output voltage is corrected by adjusting the duty cycle of the internal power transistor. This control loop ensures precise regulation of the output voltage.

Detailed Application Field Plans

The SP7656EN2-L is suitable for a wide range of applications, including:

  1. Battery-powered devices
  2. Portable electronics
  3. Industrial automation
  4. Automotive systems
  5. LED lighting
  6. Telecom infrastructure
  7. Consumer electronics

Its high efficiency and low power consumption make it ideal for energy-conscious applications. The adjustable output voltage and built-in protection features further enhance its versatility in various scenarios.

Detailed and Complete Alternative Models

  1. SP7656EN1-L: Similar specifications but with a different pin configuration (SOT-23 package)
  2. SP7656EN3-L: Higher output current capability (up to 3A) with similar specifications (SOP-8 package)
  3. SP7656EN4-L: Lower quiescent current (30µA typical) with similar specifications (SOP-8 package)

These alternative models provide options based on specific requirements, such as package size, output current, and quiescent current.

Word count: 464 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SP7656EN2-L :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of SP7656EN2-L in technical solutions:

  1. Q: What is SP7656EN2-L? A: SP7656EN2-L is a specific model or part number of a component used in technical solutions, typically in electronic circuits.

  2. Q: What is the purpose of SP7656EN2-L? A: SP7656EN2-L is designed to perform a specific function within a technical solution, such as voltage regulation or power management.

  3. Q: What are the key features of SP7656EN2-L? A: The key features of SP7656EN2-L may include high efficiency, low power consumption, wide input voltage range, overcurrent protection, and thermal shutdown.

  4. Q: How does SP7656EN2-L work? A: SP7656EN2-L works by receiving an input voltage and regulating it to a desired output voltage using internal circuitry and control mechanisms.

  5. Q: What is the maximum input voltage supported by SP7656EN2-L? A: The maximum input voltage supported by SP7656EN2-L is typically specified in the datasheet provided by the manufacturer.

  6. Q: Can SP7656EN2-L handle high current loads? A: Yes, SP7656EN2-L is designed to handle certain current loads, but the maximum current rating should be checked in the datasheet to ensure compatibility with the intended application.

  7. Q: Is SP7656EN2-L suitable for battery-powered applications? A: Yes, SP7656EN2-L can be suitable for battery-powered applications as it offers efficient power management and low power consumption features.

  8. Q: Does SP7656EN2-L have built-in protection features? A: Yes, SP7656EN2-L often includes built-in protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.

  9. Q: Can SP7656EN2-L be used in automotive applications? A: It depends on the specific requirements and certifications needed for automotive applications. Some variants of SP7656EN2-L may be suitable, but it's important to consult the datasheet and manufacturer guidelines.

  10. Q: Where can I find more information about SP7656EN2-L? A: More information about SP7656EN2-L can be found in the datasheet provided by the manufacturer or by contacting the manufacturer directly.