Exar Corporation
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XR16C850IM-F
Näytä Yksityiskohdat DataSheets

XR16C850IM-F

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: UART (Universal Asynchronous Receiver Transmitter) Controller
  • Characteristics:
    • High-performance and low-power UART controller
    • Supports data rates up to 1 Mbps
    • Compatible with industry-standard 16C85x series UARTs
    • Available in a small form factor package
  • Package: QFN (Quad Flat No-leads)
  • Essence: Provides reliable and efficient serial communication capabilities
  • Packaging/Quantity: Comes in reels, typically containing 2500 units

Specifications

  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 1 Mbps
  • Number of Channels: 1
  • FIFO Size: 128 bytes
  • Interface: Serial (RS-232)
  • Package Type: QFN-32

Detailed Pin Configuration

The XR16C850IM-F has a total of 32 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power supply voltage input | | 2 | GND | Ground | | 3 | CTS | Clear To Send | | 4 | RTS | Request To Send | | 5 | TXD | Transmit Data | | 6 | RXD | Receive Data | | ... | ... | ... |

Functional Features

  • Full-duplex UART controller
  • Supports both asynchronous and synchronous modes
  • Programmable baud rate generator
  • Automatic hardware and software flow control
  • Interrupt-driven operation for efficient data transfer
  • Built-in error detection and handling mechanisms

Advantages and Disadvantages

Advantages: - High-performance and low-power consumption - Compatible with industry-standard UARTs - Supports high data rates - Small form factor package for space-constrained applications

Disadvantages: - Limited number of channels (only 1) - Requires external components for complete UART functionality

Working Principles

The XR16C850IM-F is a UART controller that facilitates serial communication between devices. It operates by converting parallel data into serial format for transmission and vice versa. The controller handles various aspects of the communication process, including baud rate generation, flow control, error detection, and interrupt handling.

Detailed Application Field Plans

The XR16C850IM-F finds application in various fields where reliable and efficient serial communication is required. Some potential application areas include: - Industrial automation systems - Embedded systems - Networking equipment - Point-of-sale terminals - Medical devices - Telecommunication devices

Detailed and Complete Alternative Models

  • XR16C850IM-F-EB: Evaluation board for XR16C850IM-F
  • XR16C850IL-F: Low-power version of XR16C850IM-F
  • XR16C850IP-F: Extended temperature range version of XR16C850IM-F
  • XR16C850IN-F: Industrial temperature range version of XR16C850IM-F

(Note: This list is not exhaustive and there may be other alternative models available.)

Word count: 314 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XR16C850IM-F :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XR16C850IM-F in technical solutions:

1. What is XR16C850IM-F? - XR16C850IM-F is a UART (Universal Asynchronous Receiver/Transmitter) integrated circuit that provides serial communication capabilities in technical solutions.

2. What are the key features of XR16C850IM-F? - Some key features of XR16C850IM-F include high-speed data transfer rates, support for multiple UART modes, deep FIFO buffers, and compatibility with various operating voltages.

3. What applications can XR16C850IM-F be used in? - XR16C850IM-F can be used in a wide range of applications such as industrial automation, embedded systems, networking equipment, point-of-sale terminals, and communication devices.

4. How does XR16C850IM-F ensure reliable data transmission? - XR16C850IM-F incorporates error detection and correction mechanisms like parity checking and framing error detection to ensure reliable data transmission.

5. Can XR16C850IM-F handle both asynchronous and synchronous communication? - Yes, XR16C850IM-F supports both asynchronous and synchronous communication modes, making it versatile for different types of applications.

6. Does XR16C850IM-F support flow control? - Yes, XR16C850IM-F supports hardware flow control using RTS (Request to Send) and CTS (Clear to Send) signals, which helps regulate data flow between devices.

7. What is the maximum data transfer rate supported by XR16C850IM-F? - XR16C850IM-F supports data transfer rates up to 1.8432 Mbps, allowing for fast and efficient communication between devices.

8. Can XR16C850IM-F operate at different voltage levels? - Yes, XR16C850IM-F is compatible with various operating voltages ranging from 1.8V to 5.5V, making it suitable for different system requirements.

9. Does XR16C850IM-F have built-in FIFO buffers? - Yes, XR16C850IM-F has deep FIFO (First-In-First-Out) buffers that help in buffering incoming and outgoing data, reducing the risk of data loss or overrun.

10. Is XR16C850IM-F easy to integrate into existing systems? - Yes, XR16C850IM-F comes in a compact package and supports standard UART interfaces, making it relatively easy to integrate into existing systems without major modifications.

Please note that the answers provided here are general and may vary depending on specific technical requirements and implementations.