FTDI, Future Technology Devices International Ltd
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
FT121T-U
Näytä Yksityiskohdat DataSheets

FT121T-U

Product Overview

  • Category: Electronic Component
  • Use: Communication and Data Transfer
  • Characteristics: High-speed, Reliable, Compact
  • Package: Small form factor
  • Essence: Facilitates communication between devices
  • Packaging/Quantity: Individually packaged, Quantity per package: 1

Specifications

  • Dimensions: 10mm x 10mm x 2mm
  • Weight: 1 gram
  • Operating Voltage: 3.3V
  • Data Transfer Rate: Up to 1 Gbps
  • Interface: USB 3.0
  • Compatibility: Windows, Mac, Linux

Detailed Pin Configuration

The FT121T-U has the following pin configuration:

  • Pin 1: VCC
  • Pin 2: D+
  • Pin 3: D-
  • Pin 4: GND

Functional Features

  • High-speed data transfer
  • Plug-and-play functionality
  • Supports multiple operating systems
  • Compact and lightweight design
  • Low power consumption

Advantages

  • Fast and reliable data transfer
  • Easy installation and setup
  • Wide compatibility with various devices and operating systems
  • Compact size allows for flexible integration
  • Low power consumption prolongs battery life

Disadvantages

  • Limited range of applications due to USB interface
  • May require additional drivers for certain operating systems
  • Not suitable for high-power applications

Working Principles

The FT121T-U utilizes USB 3.0 technology to enable high-speed data transfer between devices. It acts as a bridge, converting data from the host device into a format that can be transmitted over the USB interface. The device is powered by the host device's USB port and requires minimal power to operate.

Detailed Application Field Plans

The FT121T-U is commonly used in the following applications:

  1. Computer peripherals: Enables fast data transfer between computers and external devices such as printers, scanners, and storage devices.
  2. Networking equipment: Facilitates communication between network devices, allowing for seamless data transmission.
  3. Industrial automation: Used in industrial control systems to connect various components and enable efficient data exchange.
  4. Consumer electronics: Integrated into devices like smartphones, tablets, and gaming consoles to support high-speed data transfer.

Detailed and Complete Alternative Models

  1. FT232R: USB-to-Serial UART interface IC
  2. FT2232H: Dual High-Speed USB-to-Multi-Purpose UART/FIFO IC
  3. FT4232H: Quad High-Speed USB-to-Multi-Purpose UART/FIFO IC
  4. FT232H: Single Channel Hi-Speed USB-to-Multi-Purpose UART/FIFO IC

These alternative models offer similar functionality and can be considered based on specific requirements and application needs.

Word count: 320 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät FT121T-U :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of FT121T-U in technical solutions:

  1. Q: What is FT121T-U? A: FT121T-U is a USB-to-UART bridge controller, commonly used for interfacing microcontrollers or other UART devices with a computer via USB.

  2. Q: What are the key features of FT121T-U? A: The key features of FT121T-U include USB 2.0 full-speed support, UART interface with programmable baud rates, 256-byte receive and transmit buffers, and support for various operating systems.

  3. Q: How can I connect FT121T-U to my microcontroller? A: FT121T-U can be connected to your microcontroller using the UART interface. You will need to connect the TX (transmit) and RX (receive) pins of FT121T-U to the corresponding pins on your microcontroller.

  4. Q: Can FT121T-U be used with any microcontroller? A: Yes, FT121T-U can be used with most microcontrollers that have a UART interface. It supports both 3.3V and 5V logic levels.

  5. Q: What operating systems are supported by FT121T-U? A: FT121T-U supports various operating systems including Windows, Linux, and macOS. Drivers and libraries are available for these platforms.

  6. Q: Is FT121T-U compatible with USB 3.0? A: No, FT121T-U is designed for USB 2.0 full-speed communication and is not compatible with USB 3.0 or higher speeds.

  7. Q: Can FT121T-U be used for both data transfer and power supply? A: Yes, FT121T-U can provide both data transfer and power supply to your microcontroller or UART device through the USB connection.

  8. Q: Are there any limitations on the maximum baud rate supported by FT121T-U? A: The maximum baud rate supported by FT121T-U is 3 Mbps, which is suitable for most applications requiring high-speed UART communication.

  9. Q: Can FT121T-U be used in industrial environments? A: Yes, FT121T-U is designed to operate in industrial environments and can withstand extended temperature ranges and harsh conditions.

  10. Q: Where can I find documentation and resources for FT121T-U? A: You can find documentation, datasheets, drivers, and other resources for FT121T-U on the manufacturer's website or through their support channels.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.