Honeywell Sensing and Productivity Solutions
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SS466A-S
Näytä Yksityiskohdat DataSheets

SS466A-S: Product Overview and Specifications

Introduction

The SS466A-S is a versatile sensor designed for use in various applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Product Category and Use

The SS466A-S belongs to the category of Hall Effect sensors. It is commonly used for position sensing in automotive, industrial, and consumer applications. The sensor is capable of detecting the presence or absence of a magnetic field, making it suitable for a wide range of uses, including proximity detection, speed measurement, and angular position sensing.

Characteristics

  • Sensing Technology: Hall Effect
  • Output Type: Digital
  • Operating Voltage: 4.5V to 24V
  • Temperature Range: -40°C to 150°C
  • Response Time: <5µs
  • Output Current: 20mA
  • Package Type: SOT-23

Packaging and Quantity

The SS466A-S is typically available in tape and reel packaging, with quantities ranging from 100 to 1000 units per reel. Each sensor is carefully packaged to ensure protection during transportation and storage.

Specifications

  • Supply Voltage: 4.5V to 24V
  • Output Voltage: High (Vcc) / Low (GND)
  • Operating Temperature: -40°C to 150°C
  • Output Current: 20mA
  • Magnetic Sensitivity: 3.125mV/Gauss

Detailed Pin Configuration

The SS466A-S features a standard SOT-23 package with three pins: 1. Vcc: Supply voltage input 2. GND: Ground connection 3. OUT: Digital output signal

Functional Features

  • High Sensitivity: The sensor offers high sensitivity to detect small changes in magnetic fields.
  • Wide Operating Voltage Range: With an operating voltage range of 4.5V to 24V, the sensor can be used in diverse electronic systems.
  • Fast Response Time: The SS466A-S provides rapid response to changes in magnetic fields, enabling real-time detection.

Advantages and Disadvantages

Advantages

  • Reliable and accurate position sensing
  • Wide temperature range for versatile applications
  • Compact SOT-23 package for easy integration

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Sensitivity to external magnetic interference

Working Principles

The SS466A-S operates based on the Hall Effect, where a voltage difference is generated across a conductor when subjected to a magnetic field. This voltage change is then converted into a digital output signal, indicating the presence or absence of the magnetic field.

Detailed Application Field Plans

The SS466A-S is well-suited for various applications, including: - Automotive: Speed and position sensing in vehicles - Industrial: Proximity detection in machinery - Consumer Electronics: Position sensing in appliances and devices

Detailed and Complete Alternative Models

For users seeking alternative models, the following sensors can be considered: - SS49E: Analog output Hall Effect sensor - SS360PT: High-temperature digital Hall Effect sensor - SS495A: Ratiometric linear Hall Effect sensor

In conclusion, the SS466A-S offers reliable and accurate position sensing capabilities, making it a valuable component in a wide range of electronic systems.

Word Count: 536

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SS466A-S :n soveltamiseen teknisissä ratkaisuissa

  1. What is SS466A-S?

    • SS466A-S is a Hall effect sensor that detects the presence of a magnetic field and provides an output signal proportional to the strength of the field.

  2. How does SS466A-S work?

    • The SS466A-S operates by sensing changes in the magnetic field and converting these changes into electrical signals, making it suitable for various applications such as position sensing and proximity detection.

  3. What are the typical operating conditions for SS466A-S?

    • The SS466A-S operates within a specified temperature range, typically from -40°C to 150°C, and requires a supply voltage within a certain range, such as 4.5V to 24V.

  4. What are the key features of SS466A-S?

    • Some key features of SS466A-S include its high sensitivity, low power consumption, and ability to operate in harsh environments.

  5. In what applications can SS466A-S be used?

    • SS466A-S is commonly used in applications such as brushless DC motor commutation, speed and RPM measurement, flow rate sensing, and position and proximity detection.

  6. What is the output signal of SS466A-S?

    • The SS466A-S typically provides a digital output signal, which can be either open-collector or push-pull, depending on the specific model.

  7. How can SS466A-S be interfaced with microcontrollers or other electronic systems?

    • SS466A-S can be easily interfaced with microcontrollers or electronic systems through its output signal, allowing for seamless integration into various technical solutions.

  8. What are the potential challenges when using SS466A-S in technical solutions?

    • Challenges may include electromagnetic interference, proper calibration for accurate measurements, and ensuring compatibility with the specific application requirements.

  9. Are there any recommended best practices for integrating SS466A-S into a technical solution?

    • Best practices may include careful consideration of the magnetic field environment, proper shielding against interference, and thorough testing and calibration.

  10. Where can I find detailed technical specifications and application notes for SS466A-S?

    • Detailed technical specifications and application notes for SS466A-S can be found in the product datasheet provided by the manufacturer, as well as in relevant technical resources and forums.