IDT, Integrated Device Technology Inc
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
74FCT162374ETPVG
Näytä Yksityiskohdat DataSheets

Encyclopedia Entry: 74FCT162374ETPVG

Product Overview

Category

The 74FCT162374ETPVG belongs to the category of integrated circuits (ICs), specifically, it falls under the category of flip-flops and latches.

Use

This product is commonly used in digital electronic systems for data storage and transfer. It serves as an octal D-type flip-flop with 3-state outputs.

Characteristics

  • Octal D-type flip-flop with 3-state outputs
  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt-trigger inputs for noise immunity
  • Output drive capability: ±24mA at 4.5V to 5.5V supply voltage

Package

The 74FCT162374ETPVG is available in a 48-pin TSSOP (Thin Shrink Small Outline Package) package.

Essence

The essence of this product lies in its ability to store and transfer digital data efficiently within electronic systems.

Packaging/Quantity

The 74FCT162374ETPVG is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Output Type: 3-state
  • Number of Inputs: 8
  • Number of Outputs: 8
  • Logic Family: FCT
  • Logic Type: CMOS

Detailed Pin Configuration

The 74FCT162374ETPVG has a total of 48 pins, which are assigned specific functions. The pin configuration is as follows:

  1. Pin 1: Output Enable (OE)
  2. Pin 2: Data Input (D0)
  3. Pin 3: Data Input (D1)
  4. Pin 4: Data Input (D2)
  5. Pin 5: Data Input (D3)
  6. Pin 6: Data Input (D4)
  7. Pin 7: Data Input (D5)
  8. Pin 8: Data Input (D6)
  9. Pin 9: Data Input (D7)
  10. Pin 10: Clock Input (CP)
  11. Pin 11: Clock Enable (CE)
  12. Pin 12: Output (Q0)
  13. Pin 13: Output (Q1)
  14. Pin 14: Output (Q2)
  15. Pin 15: Output (Q3)
  16. Pin 16: Output (Q4)
  17. Pin 17: Output (Q5)
  18. Pin 18: Output (Q6)
  19. Pin 19: Output (Q7)
  20. Pin 20: Ground (GND) 21-28: Reserved 29-32: Power Supply (VCC) 33-48: Reserved

Functional Features

The 74FCT162374ETPVG offers the following functional features:

  • Octal D-type flip-flop with 3-state outputs for efficient data storage and transfer.
  • Schmitt-trigger inputs provide noise immunity, ensuring reliable operation in noisy environments.
  • High-speed operation allows for quick data processing.
  • Low power consumption makes it suitable for battery-powered devices.
  • Wide operating voltage range provides flexibility in various electronic systems.

Advantages and Disadvantages

Advantages

  • High-speed operation enables fast data processing.
  • Low power consumption prolongs battery life in portable devices.
  • Wide operating voltage range allows for compatibility with different systems.
  • Schmitt-trigger inputs provide noise immunity, ensuring reliable operation.

Disadvantages

  • Limited number of inputs and outputs (8 each) may restrict its use in complex systems requiring more connections.
  • The 3-state output type may not be suitable for all applications.

Working Principles

The 74FCT162374ETPVG operates based on the principles of flip-flops and latches. It stores digital data using D-type flip-flops and allows for data transfer through its 3-state outputs. The clock input (CP) controls the timing of data storage and transfer, while the output enable (OE) and clock enable (CE) pins provide additional control over the output and clock signals.

Detailed Application Field Plans

The 74FCT162374ETPVG finds application in various digital electronic systems, including but not limited to:

  1. Microcontrollers and microprocessors
  2. Data communication systems
  3. Memory modules
  4. Industrial automation systems
  5. Automotive electronics
  6. Consumer electronics

Its ability to store and transfer data efficiently makes it suitable for these applications where reliable data handling is crucial.

Detailed and Complete Alternative Models

There are several alternative models available that offer similar functionality to the

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät 74FCT162374ETPVG :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of 74FCT162374ETPVG in technical solutions:

  1. Q: What is the 74FCT162374ETPVG? A: The 74FCT162374ETPVG is a 16-bit edge-triggered D-type flip-flop with 3-state outputs, commonly used in digital circuits.

  2. Q: What is the operating voltage range for this IC? A: The operating voltage range for the 74FCT162374ETPVG is typically between 4.5V and 5.5V.

  3. Q: What is the maximum clock frequency supported by this IC? A: The maximum clock frequency supported by the 74FCT162374ETPVG is typically around 100 MHz.

  4. Q: Can I use this IC in both parallel and serial data transfer applications? A: Yes, the 74FCT162374ETPVG can be used in both parallel and serial data transfer applications.

  5. Q: Does this IC have built-in output enable functionality? A: Yes, the 74FCT162374ETPVG has built-in 3-state output enable functionality, allowing multiple devices to share a common bus.

  6. Q: What is the power consumption of this IC? A: The power consumption of the 74FCT162374ETPVG depends on various factors but is generally low compared to other similar ICs.

  7. Q: Can I cascade multiple 74FCT162374ETPVG ICs together? A: Yes, you can cascade multiple 74FCT162374ETPVG ICs together to increase the number of flip-flops or create larger registers.

  8. Q: Is this IC compatible with TTL logic levels? A: Yes, the 74FCT162374ETPVG is compatible with both TTL and CMOS logic levels.

  9. Q: What is the typical propagation delay of this IC? A: The typical propagation delay of the 74FCT162374ETPVG is around 6 ns.

  10. Q: Can I use this IC in high-speed data communication applications? A: Yes, the 74FCT162374ETPVG is suitable for high-speed data communication applications due to its fast operation and low power consumption.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.