IDT, Integrated Device Technology Inc
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
8N3SV75KC-0133CDI8
Näytä Yksityiskohdat DataSheets

8N3SV75KC-0133CDI8

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Processing
  • Characteristics: High-speed, Low-power consumption
  • Package: Small Outline Integrated Circuit (SOIC)
  • Essence: Voltage Controlled Oscillator (VCO)
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Frequency Range: 1 MHz to 2.5 GHz
  • Supply Voltage: 2.7 V to 5.5 V
  • Output Power: -4 dBm to +10 dBm
  • Phase Noise: -110 dBc/Hz at 100 kHz offset
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VCC: Supply Voltage
  2. GND: Ground
  3. RFout: RF Output
  4. EN: Enable Control
  5. Vtune: Voltage Tuning Input
  6. NC: No Connection

Functional Features

  • Wide frequency range for versatile applications
  • Low power consumption for energy-efficient operation
  • Excellent phase noise performance for high-quality signal processing
  • Enable control for easy integration into larger systems
  • Voltage tuning input for precise frequency adjustment

Advantages

  • High-speed operation allows for rapid signal processing
  • Low-power consumption extends battery life in portable devices
  • Small package size enables space-saving designs
  • Wide frequency range accommodates various applications
  • Excellent phase noise performance ensures accurate signal transmission

Disadvantages

  • Limited output power may not be suitable for certain high-power applications
  • Operating temperature range may restrict usage in extreme environments
  • Requires external components for complete circuit implementation

Working Principles

The 8N3SV75KC-0133CDI8 is a voltage-controlled oscillator (VCO) that generates a frequency output based on the voltage applied to its tuning input (Vtune). The VCO operates within a specified frequency range and can be controlled by enabling or disabling the device using the EN pin. The output power level can be adjusted by varying the supply voltage (VCC).

Detailed Application Field Plans

  • Wireless Communication Systems: The 8N3SV75KC-0133CDI8 can be used in wireless communication systems such as cellular networks, Wi-Fi routers, and Bluetooth devices for generating stable and precise frequencies.
  • Test and Measurement Equipment: This IC is suitable for use in signal generators, spectrum analyzers, and other test and measurement equipment that require accurate frequency generation.
  • Radar Systems: The VCO's wide frequency range and low phase noise make it suitable for radar systems, including weather radars, surveillance radars, and military applications.

Detailed and Complete Alternative Models

  • 8N3SV75KC-0133CDI9: Similar to 8N3SV75KC-0133CDI8 but with extended temperature range (-55°C to +125°C).
  • 8N3SV75KC-0133CDI7: Lower frequency range (100 kHz to 1 GHz) version of 8N3SV75KC-0133CDI8.
  • 8N3SV75KC-0133CDI10: Higher output power (+10 dBm to +20 dBm) variant of 8N3SV75KC-0133CDI8.

Note: The above alternative models are provided for reference and may have different specifications and characteristics.

Word count: 345 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät 8N3SV75KC-0133CDI8 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of 8N3SV75KC-0133CDI8 in technical solutions:

  1. Question: What is the purpose of the 8N3SV75KC-0133CDI8 in a technical solution?
    Answer: The 8N3SV75KC-0133CDI8 is a specific component used for voltage regulation and power management in electronic circuits.

  2. Question: What is the input voltage range supported by the 8N3SV75KC-0133CDI8?
    Answer: The 8N3SV75KC-0133CDI8 supports an input voltage range of X volts to Y volts (specify the actual range based on the component's specifications).

  3. Question: What is the output voltage provided by the 8N3SV75KC-0133CDI8?
    Answer: The 8N3SV75KC-0133CDI8 provides a stable output voltage of Z volts (specify the actual value based on the component's specifications).

  4. Question: Can the 8N3SV75KC-0133CDI8 handle high current loads?
    Answer: Yes, the 8N3SV75KC-0133CDI8 is designed to handle high current loads up to A amps (specify the actual value based on the component's specifications).

  5. Question: Does the 8N3SV75KC-0133CDI8 have built-in protection features?
    Answer: Yes, the 8N3SV75KC-0133CDI8 typically includes overcurrent protection, thermal shutdown, and short-circuit protection to ensure safe operation.

  6. Question: Is the 8N3SV75KC-0133CDI8 suitable for battery-powered applications?
    Answer: Yes, the 8N3SV75KC-0133CDI8 is commonly used in battery-powered applications due to its low power consumption and efficient voltage regulation.

  7. Question: Can multiple 8N3SV75KC-0133CDI8 components be connected in parallel for higher current output?
    Answer: No, connecting multiple 8N3SV75KC-0133CDI8 components in parallel is not recommended as it may cause stability issues and affect performance.

  8. Question: What is the typical efficiency of the 8N3SV75KC-0133CDI8?
    Answer: The 8N3SV75KC-0133CDI8 typically has an efficiency of around X% (specify the actual value based on the component's specifications).

  9. Question: Does the 8N3SV75KC-0133CDI8 require any external components for operation?
    Answer: The 8N3SV75KC-0133CDI8 may require a few external components such as input/output capacitors and resistors for proper operation and stability.

  10. Question: Is the 8N3SV75KC-0133CDI8 available in different package options?
    Answer: Yes, the 8N3SV75KC-0133CDI8 is available in various package options such as surface mount packages, depending on the manufacturer's offerings.

Please note that the specific values and features mentioned in the answers should be based on the actual specifications provided by the manufacturer for the 8N3SV75KC-0133CDI8 component.