The IDT74LVC273APGG is a low-voltage CMOS flip-flop integrated circuit. It operates with a supply voltage range of 1.65V to 3.6V, making it suitable for battery-powered applications. This IC features eight D-type flip-flops with a common clock input and individual data inputs and outputs.
The IDT74LVC273APGG has a total of 20 pins, each serving a specific function:
The IDT74LVC273APGG is designed to store and transfer data in sequential logic circuits. It operates on positive-edge-triggered clock signals, allowing for synchronized data transfers. The flip-flops can be cleared using the CLR input, which resets all outputs to a low state.
Advantages: - Low-voltage operation enables use in battery-powered devices - CMOS technology provides low power consumption - Compact TSSOP package allows for space-efficient designs
Disadvantages: - Limited number of flip-flops (8 in total) - Not suitable for high-speed applications
The IDT74LVC273APGG utilizes D-type flip-flops to store and transfer data. When a positive-edge clock signal is applied to the CP pin, the data present at the D inputs is transferred to the corresponding Q outputs. The OE pin controls the output enable function, allowing for data to be either displayed or disabled. The CLR pin resets all outputs to a low state when activated.
The IDT74LVC273APGG is commonly used in various digital systems, including but not limited to:
These alternative models offer similar functionality and can be used as replacements for the IDT74LVC273APGG in various applications.
Word count: 400 words
Sure! Here are 10 common questions and answers related to the application of IDT74LVC273APGG in technical solutions:
Q: What is the IDT74LVC273APGG? A: The IDT74LVC273APGG is a octal D-type flip-flop with reset, manufactured by Integrated Device Technology (IDT).
Q: What is the purpose of the IDT74LVC273APGG? A: The IDT74LVC273APGG is used for storing and transferring data in digital circuits.
Q: How many flip-flops are there in the IDT74LVC273APGG? A: The IDT74LVC273APGG contains eight individual D-type flip-flops.
Q: What is the operating voltage range of the IDT74LVC273APGG? A: The IDT74LVC273APGG operates within a voltage range of 1.65V to 5.5V.
Q: What is the maximum clock frequency supported by the IDT74LVC273APGG? A: The IDT74LVC273APGG can operate at a maximum clock frequency of 200MHz.
Q: Does the IDT74LVC273APGG have an asynchronous reset feature? A: Yes, the IDT74LVC273APGG has an asynchronous active-low reset input.
Q: Can the IDT74LVC273APGG be cascaded to create larger registers? A: Yes, multiple IDT74LVC273APGG flip-flops can be cascaded together to create larger registers.
Q: What is the output drive capability of the IDT74LVC273APGG? A: The IDT74LVC273APGG has a balanced output drive with 24mA sink and source capability.
Q: Is the IDT74LVC273APGG compatible with other logic families? A: Yes, the IDT74LVC273APGG is designed to be compatible with both TTL and CMOS logic families.
Q: What are some typical applications of the IDT74LVC273APGG? A: The IDT74LVC273APGG is commonly used in microprocessors, memory systems, and general-purpose digital circuits where data storage and transfer is required.
Please note that these answers are general and may vary depending on specific design requirements and application scenarios.