Infineon Technologies
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
AUIPS6011
Näytä Yksityiskohdat DataSheets

AUIPS6011

Product Overview

Category

AUIPS6011 belongs to the category of automotive intelligent power switches.

Use

The AUIPS6011 is primarily used in automotive applications for controlling high-side power distribution. It is designed to handle high current loads and provide protection against overcurrent, short circuit, and over-temperature conditions.

Characteristics

  • High current handling capability
  • Overcurrent, short circuit, and over-temperature protection
  • Automotive-grade reliability and durability
  • Compact package design for space-constrained applications

Package

The AUIPS6011 is available in a compact and robust package, suitable for automotive environments. The package provides excellent thermal performance and electrical isolation.

Essence

The essence of AUIPS6011 lies in its ability to efficiently control high-current loads while ensuring the safety and reliability of automotive power distribution systems.

Packaging/Quantity

The AUIPS6011 is typically packaged in reels or tubes, depending on the manufacturer's specifications. The quantity per package may vary, but it is commonly available in quantities suitable for both prototyping and production purposes.

Specifications

  • Maximum Operating Voltage: 40V
  • Continuous Current Rating: 30A
  • On-State Resistance: 10mΩ (max)
  • Operating Temperature Range: -40°C to +150°C
  • Protection Features: Overcurrent, Short Circuit, Over-Temperature

Detailed Pin Configuration

The AUIPS6011 features a standard pin configuration with the following pins:

  1. IN - Input control signal
  2. OUT - Output to load
  3. GND - Ground reference
  4. VS - Supply voltage input

Functional Features

  • High-side power switch with integrated protection features
  • Fast response time for efficient power management
  • Low on-state resistance for minimal power loss
  • Built-in diagnostic and fault reporting capabilities
  • Wide operating temperature range for versatile applications

Advantages and Disadvantages

Advantages

  • Robust protection against overcurrent, short circuit, and over-temperature conditions
  • High current handling capability for demanding automotive applications
  • Compact package design for space-constrained installations
  • Reliable and durable performance in harsh automotive environments

Disadvantages

  • Limited voltage and current ratings compared to some other power switches
  • Higher cost compared to conventional mechanical relays

Working Principles

The AUIPS6011 operates by receiving an input control signal (IN) that determines the state of the power switch. When the control signal is activated, the switch connects the load to the supply voltage (VS). The device continuously monitors the load current and temperature, providing protection by quickly disconnecting the load in case of overcurrent or over-temperature conditions.

Detailed Application Field Plans

The AUIPS6011 finds extensive application in various automotive systems, including:

  1. Electric power steering systems
  2. Engine control units
  3. Lighting systems
  4. Heating, ventilation, and air conditioning (HVAC) systems
  5. Battery management systems
  6. Motor control units

Detailed and Complete Alternative Models

  1. AUIPS7121: Similar functionality with higher voltage rating (60V)
  2. AUIPS7141: Similar functionality with higher current rating (40A)
  3. AUIPS7171: Similar functionality with additional diagnostic features

These alternative models offer similar features and can be considered based on specific application requirements.

Word count: 515 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät AUIPS6011 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of AUIPS6011 in technical solutions:

1. What is AUIPS6011? AUIPS6011 is a specific type of automotive intelligent power switch that is commonly used in technical solutions.

2. What is the purpose of AUIPS6011? The purpose of AUIPS6011 is to control the flow of electrical power in automotive applications, providing protection and efficient management of power distribution.

3. What are the key features of AUIPS6011? Some key features of AUIPS6011 include overcurrent protection, overtemperature protection, low on-resistance, and high current handling capability.

4. How does AUIPS6011 provide overcurrent protection? AUIPS6011 has built-in circuitry that monitors the current flowing through it. If the current exceeds a certain threshold, it automatically shuts off to protect the system from damage.

5. Can AUIPS6011 handle high currents? Yes, AUIPS6011 is designed to handle high currents, typically up to several tens of amperes.

6. Is AUIPS6011 suitable for automotive applications? Yes, AUIPS6011 is specifically designed for automotive applications and meets the necessary industry standards and requirements.

7. Can AUIPS6011 be used in other non-automotive technical solutions? While AUIPS6011 is primarily intended for automotive use, it can also be applied in other technical solutions where similar power management and protection requirements exist.

8. How does AUIPS6011 provide overtemperature protection? AUIPS6011 has a built-in thermal shutdown feature that activates when the temperature exceeds a certain limit, preventing overheating and potential damage.

9. Are there any specific voltage requirements for AUIPS6011? AUIPS6011 typically operates within a specific voltage range, such as 12V or 24V, depending on the application. It is important to ensure compatibility with the system's voltage requirements.

10. Can AUIPS6011 be controlled remotely? Yes, AUIPS6011 can be controlled remotely using appropriate control signals, allowing for integration into larger systems and enabling advanced power management capabilities.

Please note that these questions and answers are general in nature and may vary depending on the specific technical solution and application context.