Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
BSS138W L6433

BSS138W L6433

Product Overview

Category

The BSS138W L6433 belongs to the category of small signal MOSFET transistors.

Use

It is commonly used in low voltage, low current applications such as amplifiers, switches, and signal processing circuits.

Characteristics

  • Low threshold voltage
  • Low input capacitance
  • High-speed switching
  • Low on-resistance

Package

The BSS138W L6433 is typically available in a SOT-323 surface mount package.

Essence

This MOSFET transistor is essential for controlling and amplifying electronic signals in low power applications.

Packaging/Quantity

The BSS138W L6433 is usually packaged in reels with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (VDS): 50V
  • Continuous Drain Current (ID): 200mA
  • Total Power Dissipation (PD): 225mW
  • Threshold Voltage (VGS(th)): 1.5V - 3.0V
  • Input Capacitance (Ciss): 45pF

Detailed Pin Configuration

The BSS138W L6433 has three pins: 1. Source (S) 2. Gate (G) 3. Drain (D)

Functional Features

  • Low threshold voltage allows for efficient control in low voltage applications.
  • High-speed switching enables quick response in signal processing circuits.
  • Low input capacitance minimizes the impact on high-frequency signals.

Advantages and Disadvantages

Advantages

  • Low threshold voltage enhances compatibility with low voltage systems.
  • High-speed switching improves overall circuit performance.
  • Low on-resistance reduces power dissipation and heat generation.

Disadvantages

  • Limited maximum drain-source voltage may not be suitable for high voltage applications.
  • Lower continuous drain current compared to other MOSFET transistors may limit its use in higher power applications.

Working Principles

The BSS138W L6433 operates based on the principle of field-effect transistors, where the flow of current between the source and drain terminals is controlled by the voltage applied to the gate terminal.

Detailed Application Field Plans

The BSS138W L6433 is widely used in various low power applications including: - Audio amplifiers - Signal switches - Battery-powered devices - Sensor interfaces

Detailed and Complete Alternative Models

Some alternative models to the BSS138W L6433 include: - 2N7002 - DMN10H170SK3 - AO3400A

In conclusion, the BSS138W L6433 is a small signal MOSFET transistor with specific characteristics that make it suitable for low voltage, low current applications. Its features, advantages, and application fields position it as a valuable component in electronic circuits requiring efficient signal control and amplification.

[Word Count: 366]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät BSS138W L6433 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the maximum drain-source voltage of BSS138W L6433?

    • The maximum drain-source voltage of BSS138W L6433 is 50V.
  2. What is the maximum continuous drain current of BSS138W L6433?

    • The maximum continuous drain current of BSS138W L6433 is 220mA.
  3. What is the on-state resistance (RDS(on)) of BSS138W L6433?

    • The on-state resistance (RDS(on)) of BSS138W L6433 is typically 1.5 ohms at VGS = 10V.
  4. What is the gate-source threshold voltage of BSS138W L6433?

    • The gate-source threshold voltage of BSS138W L6433 is typically 0.8V to 2.5V.
  5. Can BSS138W L6433 be used for level shifting applications?

    • Yes, BSS138W L6433 can be used for level shifting due to its low threshold voltage and high input impedance.
  6. Is BSS138W L6433 suitable for battery-powered applications?

    • Yes, BSS138W L6433 is suitable for battery-powered applications due to its low power consumption and low threshold voltage.
  7. What are the typical applications of BSS138W L6433?

    • Typical applications of BSS138W L6433 include signal switching, small-signal amplification, level shifting, and load switching in portable electronics.
  8. Does BSS138W L6433 have ESD protection?

    • Yes, BSS138W L6433 has built-in ESD protection, making it suitable for robust and reliable designs.
  9. What is the operating temperature range of BSS138W L6433?

    • The operating temperature range of BSS138W L6433 is typically -55°C to 150°C.
  10. Is BSS138W L6433 RoHS compliant?

    • Yes, BSS138W L6433 is RoHS compliant, making it environmentally friendly and suitable for use in various electronic products.