Infineon Technologies
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
BTS721L1XUMA1
Näytä Yksityiskohdat DataSheets

BTS721L1XUMA1

Basic Information Overview

  • Category: Power Switches
  • Use: Automotive applications, such as controlling motors and other high-current loads in vehicles.
  • Characteristics: High current capability, low on-resistance, overtemperature protection, short-circuit protection, and diagnostic feedback.
  • Package: TO-220AB
  • Essence: This product is a power switch designed for automotive applications, providing efficient control of high-current loads.

Specifications

  • Maximum Operating Voltage: 40V
  • Continuous Current: 30A
  • RDS(ON): 8.5mΩ
  • Overtemperature Protection: Yes
  • Short-Circuit Protection: Yes
  • Diagnostic Feedback: Yes

Detailed Pin Configuration

The BTS721L1XUMA1 has the following pin configuration: - Pin 1: Input Control (IN) - Pin 2: Ground (GND) - Pin 3: Output (OUT) - Pin 4: Diagnostic Feedback (DFB) - Pin 5: Supply Voltage (VS)

Functional Features

  • High current capability allows for efficient control of motors and other high-current loads.
  • Low on-resistance minimizes power losses and improves overall efficiency.
  • Overtemperature protection ensures safe operation even under extreme conditions.
  • Short-circuit protection prevents damage to the device and connected components.
  • Diagnostic feedback provides information about the status of the power switch.

Advantages and Disadvantages

Advantages: - High current capability enables control of demanding automotive applications. - Low on-resistance reduces power losses and improves efficiency. - Overtemperature and short-circuit protection enhance safety. - Diagnostic feedback allows for easy monitoring of the device's status.

Disadvantages: - Limited to automotive applications, not suitable for other industries. - Only available in TO-220AB package, limiting flexibility in certain designs.

Working Principles

The BTS721L1XUMA1 is based on MOSFET technology, which allows for efficient switching of high currents. It operates by controlling the gate voltage to regulate the flow of current through the device. The power switch also incorporates protection features, such as overtemperature and short-circuit protection, to ensure safe operation in automotive applications.

Detailed Application Field Plans

The BTS721L1XUMA1 is primarily used in automotive applications, including: - Electric power steering systems - Electric braking systems - Engine cooling fans - Electric seat adjustment - Window lifters

Detailed and Complete Alternative Models

  • BTS721L1E3120XTSA1
  • BTS721L1E3220XTSA1
  • BTS721L1E3320XTSA1
  • BTS721L1E3420XTSA1
  • BTS721L1E3520XTSA1

These alternative models offer similar functionality and characteristics to the BTS721L1XUMA1, providing options for different design requirements.

Note: This entry has a total word count of 345 words. Additional content is required to reach the desired 1100-word count.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät BTS721L1XUMA1 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of BTS721L1XUMA1 in technical solutions:

Q1: What is BTS721L1XUMA1? A1: BTS721L1XUMA1 is a high-side power switch used for controlling loads in automotive and industrial applications.

Q2: What is the maximum voltage and current rating of BTS721L1XUMA1? A2: The maximum voltage rating is 40V, and the maximum current rating is 30A.

Q3: What are the typical applications of BTS721L1XUMA1? A3: BTS721L1XUMA1 is commonly used in automotive systems such as lighting control, motor control, and power distribution modules. It can also be used in industrial applications like factory automation and robotics.

Q4: What is the operating temperature range of BTS721L1XUMA1? A4: The operating temperature range is typically -40°C to +150°C.

Q5: Does BTS721L1XUMA1 have built-in protection features? A5: Yes, it has various protection features including overcurrent protection, overtemperature protection, and short-circuit protection.

Q6: Can BTS721L1XUMA1 be controlled using a microcontroller? A6: Yes, it can be controlled using a microcontroller through its input pin.

Q7: What is the logic level required to control BTS721L1XUMA1? A7: BTS721L1XUMA1 operates with a logic level of 3.3V or 5V.

Q8: Can multiple BTS721L1XUMA1 devices be connected in parallel? A8: Yes, multiple devices can be connected in parallel to handle higher current loads.

Q9: Does BTS721L1XUMA1 require an external freewheeling diode? A9: No, it has an integrated freewheeling diode for inductive load protection.

Q10: Is BTS721L1XUMA1 compliant with automotive standards? A10: Yes, BTS721L1XUMA1 is compliant with the AEC-Q100 automotive qualification standard.

Please note that these answers are general and may vary depending on the specific application and requirements.