Infineon Technologies
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
ICE3A2065PBKSA1
Näytä Yksityiskohdat DataSheets

ICE3A2065PBKSA1

Product Overview

Category

The ICE3A2065PBKSA1 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in power supply applications, specifically for offline flyback converters.

Characteristics

  • High efficiency
  • Low standby power consumption
  • Wide input voltage range
  • Over-temperature protection
  • Overload protection
  • Short-circuit protection

Package

The ICE3A2065PBKSA1 is available in a compact and industry-standard DIP-8 package.

Essence

The essence of this product lies in its ability to efficiently convert high-voltage AC power to low-voltage DC power, making it suitable for various electronic devices.

Packaging/Quantity

The ICE3A2065PBKSA1 is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Input Voltage Range: 85VAC to 265VAC
  • Output Power: Up to 65W
  • Switching Frequency: 67kHz to 100kHz
  • Operating Temperature Range: -40°C to +125°C
  • Maximum Duty Cycle: 75%

Detailed Pin Configuration

The ICE3A2065PBKSA1 has eight pins, which are assigned specific functions:

  1. VCC: Power supply pin
  2. GND: Ground reference pin
  3. FB: Feedback pin for regulating output voltage
  4. CS: Current sense pin for controlling current flow
  5. DRAIN: High-voltage power switch pin
  6. SOURCE: Source pin for the internal power switch
  7. VSENSE: Voltage sense pin for monitoring input voltage
  8. COMP: Compensation pin for stability control

Functional Features

  • High efficiency power conversion
  • Built-in protection mechanisms for over-temperature, overload, and short-circuit conditions
  • Wide input voltage range allows for universal compatibility
  • Low standby power consumption for energy-saving operation
  • Compact package size for space-constrained applications

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power loss and improved energy conservation.
  • Comprehensive protection features ensure safe and reliable operation.
  • Wide input voltage range enables versatile usage in different regions.
  • Low standby power consumption minimizes energy wastage during idle periods.

Disadvantages

  • Limited output power capability compared to higher-rated ICs.
  • Relatively higher cost compared to some other power supply solutions.
  • Requires careful design considerations for optimal performance.

Working Principles

The ICE3A2065PBKSA1 operates based on the flyback converter topology. It utilizes a high-voltage power switch to control the energy transfer from the primary side to the secondary side of the transformer. The feedback mechanism regulates the output voltage by adjusting the duty cycle of the power switch. This IC incorporates various protection features to ensure safe operation under different load conditions.

Detailed Application Field Plans

The ICE3A2065PBKSA1 is widely used in various applications, including but not limited to: - Power adapters for laptops, smartphones, and other electronic devices - LED lighting systems - Industrial power supplies - Home appliances such as televisions and audio equipment

Detailed and Complete Alternative Models

  • ICE3A0565Z: Lower power variant suitable for applications up to 30W
  • ICE3B0365J: Higher power variant suitable for applications up to 100W
  • ICE3PCS01G: Integrated power stage solution with enhanced functionality

These alternative models offer different power ratings and additional features, providing flexibility for various application requirements.

Word count: 536 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät ICE3A2065PBKSA1 :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of ICE3A2065PBKSA1 in technical solutions:

Q1: What is ICE3A2065PBKSA1? A1: ICE3A2065PBKSA1 is a power management IC (Integrated Circuit) commonly used in various technical solutions.

Q2: What is the purpose of ICE3A2065PBKSA1? A2: The purpose of ICE3A2065PBKSA1 is to provide efficient power management and control in electronic systems.

Q3: What are the key features of ICE3A2065PBKSA1? A3: Some key features of ICE3A2065PBKSA1 include high efficiency, low standby power consumption, over-temperature protection, and over-voltage protection.

Q4: In which applications can ICE3A2065PBKSA1 be used? A4: ICE3A2065PBKSA1 can be used in various applications such as power supplies, LED lighting, motor control, and other electronic systems that require efficient power management.

Q5: What is the input voltage range supported by ICE3A2065PBKSA1? A5: ICE3A2065PBKSA1 supports an input voltage range of typically 85VAC to 265VAC.

Q6: What is the output voltage range of ICE3A2065PBKSA1? A6: The output voltage range of ICE3A2065PBKSA1 depends on the specific application and can be customized accordingly.

Q7: Does ICE3A2065PBKSA1 have any built-in protection features? A7: Yes, ICE3A2065PBKSA1 has built-in protection features such as over-temperature protection, over-voltage protection, and over-current protection.

Q8: Can ICE3A2065PBKSA1 be used in high-power applications? A8: Yes, ICE3A2065PBKSA1 can be used in high-power applications as it is designed to handle higher power levels efficiently.

Q9: Is there any recommended circuit design for using ICE3A2065PBKSA1? A9: Yes, the datasheet of ICE3A2065PBKSA1 provides a recommended circuit design that can be followed for optimal performance.

Q10: Where can I find more information about ICE3A2065PBKSA1? A10: More information about ICE3A2065PBKSA1 can be found in its datasheet, which is available from the manufacturer's website or through authorized distributors.