Infineon Technologies
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
IPL60R065C7AUMA1
Näytä Yksityiskohdat DataSheets

IPL60R065C7AUMA1

Product Overview

  • Category: Power semiconductor
  • Use: Power conversion and control
  • Characteristics: High voltage, high current, low on-resistance
  • Package: TO-247
  • Essence: Efficient power management
  • Packaging/Quantity: Single unit

Specifications

  • Voltage Rating: 650V
  • Current Rating: 60A
  • On-Resistance: 65mΩ
  • Gate Threshold Voltage: 4V
  • Gate Charge: 110nC
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The IPL60R065C7AUMA1 features a standard TO-247 pin configuration with three pins: gate (G), drain (D), and source (S).

Functional Features

  • High voltage capability
  • Low gate charge
  • Fast switching speed
  • Low on-resistance
  • Avalanche energy specified

Advantages and Disadvantages

Advantages

  • Efficient power management
  • High voltage and current handling capability
  • Fast switching speed

Disadvantages

  • Higher cost compared to lower-rated devices
  • Requires careful thermal management due to high power dissipation

Working Principles

The IPL60R065C7AUMA1 operates based on the principles of field-effect transistors (FETs), utilizing its high voltage capability and low on-resistance to efficiently control and convert power in various applications.

Detailed Application Field Plans

The IPL60R065C7AUMA1 is suitable for a wide range of applications including: - Switched-mode power supplies - Motor drives - Inverters - Industrial power systems - Renewable energy systems

Detailed and Complete Alternative Models

  • IPL50R045C7AUMA1: 450V, 50A, 45mΩ
  • IPL70R075C7AUMA1: 750V, 70A, 75mΩ
  • IPL80R085C7AUMA1: 850V, 80A, 85mΩ
  • IPL100R010C7AUMA1: 1000V, 100A, 100mΩ

In conclusion, the IPL60R065C7AUMA1 is a high-performance power semiconductor device designed for efficient power management in various applications, offering high voltage capability, low on-resistance, and fast switching speed. While it comes with a higher cost and requires careful thermal management, its advantages make it a preferred choice for demanding power control and conversion needs.

[Word count: 345]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät IPL60R065C7AUMA1 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the maximum voltage rating of IPL60R065C7AUMA1?

    • The maximum voltage rating of IPL60R065C7AUMA1 is 650V.

  2. What is the typical on-state resistance of IPL60R065C7AUMA1?

    • The typical on-state resistance of IPL60R065C7AUMA1 is 65 mΩ.

  3. What is the maximum drain current of IPL60R065C7AUMA1?

    • The maximum drain current of IPL60R065C7AUMA1 is 120A.

  4. What are the typical applications for IPL60R065C7AUMA1?

    • IPL60R065C7AUMA1 is commonly used in applications such as motor control, power supplies, and inverters.

  5. What is the gate threshold voltage of IPL60R065C7AUMA1?

    • The gate threshold voltage of IPL60R065C7AUMA1 is typically around 4V.

  6. Does IPL60R065C7AUMA1 have built-in protection features?

    • Yes, IPL60R065C7AUMA1 has built-in overcurrent and overtemperature protection.

  7. What is the operating temperature range of IPL60R065C7AUMA1?

    • IPL60R065C7AUMA1 has an operating temperature range of -55°C to 150°C.

  8. Is IPL60R065C7AUMA1 suitable for high-frequency switching applications?

    • Yes, IPL60R065C7AUMA1 is designed for high-frequency switching up to several hundred kHz.

  9. What package type does IPL60R065C7AUMA1 come in?

    • IPL60R065C7AUMA1 is available in a TO-247 package.

  10. Are there any recommended thermal management guidelines for IPL60R065C7AUMA1?

    • It is recommended to use appropriate heatsinking and thermal interface materials to manage the heat dissipation of IPL60R065C7AUMA1 in high-power applications.