Infineon Technologies
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
IR2172S
Näytä Yksityiskohdat DataSheets

IR2172S

Product Overview

Category: Integrated Circuit (IC)

Use: The IR2172S is a high-performance power management IC designed for use in various applications, including motor control, power supplies, and lighting systems.

Characteristics: - High efficiency - Low power consumption - Compact size - Wide operating voltage range

Package: The IR2172S is available in a small outline package (SOP) with 16 pins.

Essence: This IC integrates multiple functions required for efficient power management, making it an essential component in modern electronic devices.

Packaging/Quantity: The IR2172S is typically sold in reels containing 250 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 20V
  • Output Voltage Range: 0V to VCC
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to 85°C
  • Switching Frequency: 500kHz

Pin Configuration

The IR2172S features the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. OUT: Output voltage
  4. FB: Feedback pin for regulating output voltage
  5. EN: Enable pin for turning the IC on/off
  6. COMP: Compensation pin for stability control
  7. CS: Current sense pin for current monitoring
  8. RT: Timing resistor pin for setting switching frequency
  9. CT: Timing capacitor pin for setting switching frequency
  10. SS: Soft-start pin for gradual startup
  11. PGND: Power ground reference
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection

Functional Features

  • Integrated high-side and low-side gate drivers
  • Adaptive dead-time control for improved efficiency
  • Overcurrent protection
  • Undervoltage lockout (UVLO) protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Compact size allows for space-saving designs - Wide operating voltage range enables versatile applications - Integrated gate drivers simplify circuit design

Disadvantages: - Limited maximum output current of 1A may not be suitable for high-power applications - Operating temperature range may restrict usage in extreme environments

Working Principles

The IR2172S operates by regulating the input voltage and converting it into a controlled output voltage. It utilizes the integrated gate drivers to drive external power MOSFETs, enabling efficient power conversion. The IC incorporates various protection features to ensure safe operation and prevent damage to the circuit.

Detailed Application Field Plans

The IR2172S finds extensive application in the following fields:

  1. Motor Control:

    • Brushless DC motor control
    • Stepper motor control

  2. Power Supplies:

    • Switching power supplies
    • DC-DC converters

  3. Lighting Systems:

    • LED driver circuits
    • Dimming control circuits

Detailed and Complete Alternative Models

  1. IR2172SPBF: Similar to IR2172S but with additional overvoltage protection feature.
  2. IR2172STRPBF: Surface mount version of IR2172S with tape and reel packaging.
  3. IR2172SDTRPBF: Dual-side cooling variant of IR2172S for enhanced thermal management.

These alternative models offer similar functionality and can be used as substitutes based on specific requirements.

Word count: 410 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät IR2172S :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of IR2172S in technical solutions:

  1. Q: What is the IR2172S? A: The IR2172S is a high-speed, high-voltage gate driver IC designed for driving MOSFETs and IGBTs in various power applications.

  2. Q: What voltage range does the IR2172S support? A: The IR2172S supports a wide voltage range from 10V to 20V, making it suitable for a variety of power supply designs.

  3. Q: Can the IR2172S be used with both MOSFETs and IGBTs? A: Yes, the IR2172S can drive both MOSFETs and IGBTs, providing flexibility in choosing the appropriate power device for your application.

  4. Q: What is the maximum output current capability of the IR2172S? A: The IR2172S has a peak output current capability of up to 2A, allowing it to drive high-power devices efficiently.

  5. Q: Does the IR2172S have built-in protection features? A: Yes, the IR2172S includes various protection features such as under-voltage lockout (UVLO), over-current protection (OCP), and thermal shutdown.

  6. Q: Can the IR2172S operate at high temperatures? A: Yes, the IR2172S is designed to operate reliably at high temperatures, with a junction temperature range of -40°C to 150°C.

  7. Q: What is the typical switching frequency range supported by the IR2172S? A: The IR2172S supports a wide range of switching frequencies, typically ranging from a few kilohertz to several megahertz.

  8. Q: Does the IR2172S require an external bootstrap diode? A: No, the IR2172S features an integrated high-voltage floating bootstrap diode, eliminating the need for an external diode.

  9. Q: Can the IR2172S be used in motor control applications? A: Yes, the IR2172S is suitable for motor control applications, providing efficient and reliable gate drive for MOSFETs or IGBTs used in motor drives.

  10. Q: What is the recommended input voltage for the IR2172S? A: The recommended input voltage for the IR2172S is typically 12V, but it can operate within a range of 10V to 20V.

Please note that these answers are general and may vary depending on specific application requirements.