Infineon Technologies
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SMBTA06E6433HTMA1
Näytä Yksityiskohdat DataSheets

SMBTA06E6433HTMA1

Product Overview

  • Category: Transistor
  • Use: Amplification and switching of electronic signals
  • Characteristics: Small form factor, high gain, low power consumption
  • Package: SOT-23
  • Essence: NPN Bipolar Junction Transistor
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Maximum Power Dissipation: 225mW
  • Collector-Base Voltage (VCBO): 40V
  • Collector-Emitter Voltage (VCEO): 40V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 100mA
  • DC Current Gain (hFE): 100 - 250
  • Transition Frequency (fT): 300MHz

Detailed Pin Configuration

  1. Emitter (E)
  2. Base (B)
  3. Collector (C)

Functional Features

  • High current gain
  • Low noise
  • Fast switching speed
  • Small footprint

Advantages

  • Suitable for high-density surface mount applications
  • Wide range of hFE options available
  • Low cost

Disadvantages

  • Limited power dissipation capability
  • Susceptible to thermal runaway at high currents

Working Principles

The SMBTA06E6433HTMA1 operates based on the principles of bipolar junction transistors, utilizing the control of current flow between its three terminals to amplify or switch electronic signals.

Detailed Application Field Plans

  • Audio amplification circuits
  • Signal processing circuits
  • Switching circuits in portable electronic devices

Detailed and Complete Alternative Models

  • BC547
  • 2N3904
  • 2SC945

This comprehensive entry provides a detailed overview of the SMBTA06E6433HTMA1 transistor, including its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SMBTA06E6433HTMA1 :n soveltamiseen teknisissä ratkaisuissa

  1. What is SMBTA06E6433HTMA1?

    • SMBTA06E6433HTMA1 is a dual PNP transistor with a maximum collector current of 100mA and a power dissipation of 225mW.

  2. What are the typical applications of SMBTA06E6433HTMA1?

    • Typical applications include general-purpose switching and amplification in electronic circuits.

  3. What is the voltage rating for SMBTA06E6433HTMA1?

    • The voltage rating for SMBTA06E6433HTMA1 is 80V.

  4. What are the key electrical characteristics of SMBTA06E6433HTMA1?

    • The key electrical characteristics include a DC current gain (hFE) ranging from 40 to 250 and a low saturation voltage.

  5. Can SMBTA06E6433HTMA1 be used in high-frequency applications?

    • Yes, SMBTA06E6433HTMA1 can be used in moderate-speed switching applications due to its moderate transition frequency.

  6. What are the thermal considerations for using SMBTA06E6433HTMA1 in technical solutions?

    • Thermal considerations include proper heat sinking and ensuring that the maximum junction temperature is not exceeded.

  7. Is SMBTA06E6433HTMA1 suitable for battery-powered applications?

    • Yes, SMBTA06E6433HTMA1's low collector current makes it suitable for battery-powered applications where power efficiency is important.

  8. What are the recommended operating conditions for SMBTA06E6433HTMA1?

    • The recommended operating conditions include a maximum collector current of 100mA and an operating temperature range of -55°C to 150°C.

  9. Can SMBTA06E6433HTMA1 be used in audio amplifier circuits?

    • Yes, SMBTA06E6433HTMA1 can be used in low-power audio amplifier circuits and other low-frequency applications.

  10. Are there any specific layout considerations when using SMBTA06E6433HTMA1 on a PCB?

    • It is important to minimize lead lengths and ensure proper grounding and decoupling for optimal performance of SMBTA06E6433HTMA1 in PCB layouts.