Infineon Technologies
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SPP20N60C3HKSA1
Näytä Yksityiskohdat DataSheets

SPP20N60C3HKSA1 - Power MOSFET

Basic Information Overview

  • Category: Power semiconductor
  • Use: Switching and amplification in power electronics
  • Characteristics: High voltage, high current capability, low on-state resistance
  • Package: TO-220
  • Essence: Efficient power management
  • Packaging/Quantity: Typically sold in reels of 1000 units

Specifications

  • Voltage Rating: 600V
  • Current Rating: 20A
  • On-State Resistance: 0.32 ohms
  • Gate Threshold Voltage: 4V
  • Power Dissipation: 300W

Detailed Pin Configuration

The SPP20N60C3HKSA1 follows the standard pin configuration for a TO-220 package: 1. Source (S) 2. Gate (G) 3. Drain (D)

Functional Features

  • High voltage capability
  • Low gate charge
  • Fast switching speed
  • Low on-state resistance

Advantages and Disadvantages

Advantages

  • Efficient power management
  • Suitable for high-power applications
  • Fast switching speed
  • Low conduction losses

Disadvantages

  • Higher cost compared to lower-rated MOSFETs
  • Requires careful handling due to high voltage capabilities

Working Principles

The SPP20N60C3HKSA1 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the source and drain terminals. When the gate-source voltage exceeds the threshold, the MOSFET turns on, allowing current to flow through it.

Detailed Application Field Plans

The SPP20N60C3HKSA1 is commonly used in various power electronic applications, including: - Switch-mode power supplies - Motor control - Inverters - Audio amplifiers - LED lighting

Detailed and Complete Alternative Models

  • IRFP460: Similar voltage and current ratings
  • FDPF20N60NZ: Comparable specifications and package type
  • STP20NM60: Alternative from a different manufacturer with similar characteristics

This comprehensive entry provides an in-depth understanding of the SPP20N60C3HKSA1, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SPP20N60C3HKSA1 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the maximum drain-source voltage of SPP20N60C3HKSA1?

    • The maximum drain-source voltage of SPP20N60C3HKSA1 is 600V.

  2. What is the continuous drain current rating of SPP20N60C3HKSA1?

    • SPP20N60C3HKSA1 has a continuous drain current rating of 20A.

  3. What is the typical on-resistance of SPP20N60C3HKSA1?

    • The typical on-resistance of SPP20N60C3HKSA1 is 0.16 ohms.

  4. Can SPP20N60C3HKSA1 be used in high-frequency switching applications?

    • Yes, SPP20N60C3HKSA1 is suitable for high-frequency switching applications.

  5. What is the operating temperature range of SPP20N60C3HKSA1?

    • SPP20N60C3HKSA1 can operate within a temperature range of -55°C to 150°C.

  6. Does SPP20N60C3HKSA1 have built-in protection features?

    • SPP20N60C3HKSA1 offers built-in overcurrent and thermal protection.

  7. Is SPP20N60C3HKSA1 RoHS compliant?

    • Yes, SPP20N60C3HKSA1 is RoHS compliant.

  8. What type of package does SPP20N60C3HKSA1 come in?

    • SPP20N60C3HKSA1 is available in a TO-220 package.

  9. Can SPP20N60C3HKSA1 be used in automotive applications?

    • Yes, SPP20N60C3HKSA1 is suitable for use in automotive applications.

  10. Are there any application notes or reference designs available for SPP20N60C3HKSA1?

    • Yes, application notes and reference designs for SPP20N60C3HKSA1 are available from the manufacturer's website.