Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
HIP2123FRTBZ-T

HIP2123FRTBZ-T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance, high-efficiency power controller
  • Package: 16-pin TQFN package
  • Essence: Regulates and controls power supply in various electronic devices
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Output Current: 2A
  • Switching Frequency: Up to 1MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The HIP2123FRTBZ-T has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VCC: Supply voltage pin
  4. EN: Enable pin
  5. FB: Feedback pin
  6. COMP: Compensation pin
  7. SS: Soft-start pin
  8. PGND: Power ground pin
  9. BOOT: Bootstrap pin
  10. LX: Switch node pin
  11. AGND: Analog ground pin
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency and low power dissipation
  • Integrated protection features such as overvoltage and overcurrent protection
  • Adjustable output voltage through external components
  • Soft-start function for controlled startup

Advantages and Disadvantages

Advantages: - High-performance power regulation - Wide input voltage range - Integrated protection features - Adjustable output voltage

Disadvantages: - Limited maximum output current (2A) - Requires external components for output voltage adjustment

Working Principles

The HIP2123FRTBZ-T is a power controller IC that regulates and controls the power supply in electronic devices. It operates by converting the input voltage to the desired output voltage using a switching regulator circuit. The integrated control features ensure stable and efficient power delivery while providing protection against overvoltage and overcurrent conditions.

Detailed Application Field Plans

The HIP2123FRTBZ-T finds applications in various fields, including but not limited to:

  1. Industrial automation
  2. Automotive electronics
  3. Telecommunications
  4. Consumer electronics
  5. Power management systems

In industrial automation, it can be used to regulate power supply in motor control systems. In automotive electronics, it can be utilized for power management in vehicle electrical systems. In telecommunications, it can be employed in power supply units for network equipment. In consumer electronics, it can be integrated into power adapters and chargers. In power management systems, it can be utilized for efficient energy conversion and distribution.

Detailed and Complete Alternative Models

  1. HIP2100: Similar power controller IC with lower maximum output current (1A)
  2. HIP2130: Power controller IC with higher maximum output current (3A)
  3. HIP2140: Power controller IC with adjustable frequency and synchronization capabilities
  4. HIP2150: Power controller IC with integrated digital interface for advanced control options

These alternative models offer different specifications and features, allowing users to choose the most suitable option based on their specific requirements.

Word count: 446 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät HIP2123FRTBZ-T :n soveltamiseen teknisissä ratkaisuissa

  1. What is the maximum operating temperature of HIP2123FRTBZ-T?
    - The maximum operating temperature of HIP2123FRTBZ-T is 125°C.

  2. What is the typical input voltage range for HIP2123FRTBZ-T?
    - The typical input voltage range for HIP2123FRTBZ-T is 4.5V to 18V.

  3. Can HIP2123FRTBZ-T be used in automotive applications?
    - Yes, HIP2123FRTBZ-T is suitable for automotive applications.

  4. What is the output current capability of HIP2123FRTBZ-T?
    - HIP2123FRTBZ-T has an output current capability of up to 1A.

  5. Is HIP2123FRTBZ-T compatible with PWM control?
    - Yes, HIP2123FRTBZ-T is compatible with PWM control.

  6. What is the typical switching frequency range for HIP2123FRTBZ-T?
    - The typical switching frequency range for HIP2123FRTBZ-T is 100kHz to 1MHz.

  7. Does HIP2123FRTBZ-T have built-in protection features?
    - Yes, HIP2123FRTBZ-T includes built-in overcurrent and thermal shutdown protection.

  8. Can HIP2123FRTBZ-T be used in power supply applications?
    - Yes, HIP2123FRTBZ-T is commonly used in power supply applications.

  9. What package type does HIP2123FRTBZ-T come in?
    - HIP2123FRTBZ-T is available in a 16-pin SOIC package.

  10. Is there a recommended application circuit for using HIP2123FRTBZ-T?
    - Yes, a recommended application circuit can be found in the HIP2123FRTBZ-T datasheet.