Intersil
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
ISL6115AIBZ
Näytä Yksityiskohdat DataSheets

ISL6115AIBZ

Product Overview

Category

ISL6115AIBZ belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a voltage regulator in various electronic devices.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent and thermal protection

Package

ISL6115AIBZ is available in a small outline package (SOIC) with eight pins.

Essence

The essence of ISL6115AIBZ lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

ISL6115AIBZ is typically packaged in reels, with 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 6V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV at 1A
  • Maximum Output Current: 1.5A
  • Quiescent Current: 120µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. EN: Enable pin for turning the regulator on/off
  5. VOUT: Output voltage pin
  6. COMP: Compensation pin for stability control
  7. SS/TR: Soft-start/Tracking pin for controlling startup behavior
  8. PGND: Power ground pin

Functional Features

  • Voltage regulation with high efficiency
  • Overcurrent and thermal protection for enhanced safety
  • Soft-start and tracking capability for controlled startup
  • Adjustable output voltage through feedback pin

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Overcurrent and thermal protection ensure device safety
  • Small package size enables space-saving designs

Disadvantages

  • Limited maximum output current of 1.5A
  • Dropout voltage of 200mV may affect certain applications with low input voltages

Working Principles

ISL6115AIBZ operates as a linear voltage regulator, maintaining a stable output voltage regardless of variations in the input voltage. It achieves this by comparing the feedback voltage (FB) with a reference voltage and adjusting the pass transistor accordingly. The regulator also incorporates overcurrent and thermal protection mechanisms to safeguard the connected circuitry.

Detailed Application Field Plans

ISL6115AIBZ finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wireless communication devices - Battery-powered systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL6115AIBZ are: - LM317 - LT1086 - MAX603 - TPS7A47

These models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, ISL6115AIBZ is an integrated circuit voltage regulator known for its high efficiency, wide input voltage range, and overcurrent/thermal protection. It is commonly used in various portable electronic devices. While it has limitations in terms of maximum output current and dropout voltage, it offers several advantages such as small package size and adjustable output voltage. Alternative models like LM317, LT1086, MAX603, and TPS7A47 can be considered based on specific needs.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät ISL6115AIBZ :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of ISL6115AIBZ in technical solutions:

  1. Q: What is ISL6115AIBZ? A: ISL6115AIBZ is a voltage monitor and reset IC designed for use in various technical solutions.

  2. Q: What is the purpose of ISL6115AIBZ? A: The purpose of ISL6115AIBZ is to monitor the voltage level of a power supply and generate a reset signal when the voltage falls below a certain threshold.

  3. Q: What is the input voltage range supported by ISL6115AIBZ? A: ISL6115AIBZ supports an input voltage range of 1.6V to 5.5V.

  4. Q: How accurate is the voltage monitoring feature of ISL6115AIBZ? A: The voltage monitoring accuracy of ISL6115AIBZ is typically ±1.5%.

  5. Q: Can ISL6115AIBZ be used in battery-powered applications? A: Yes, ISL6115AIBZ can be used in battery-powered applications as it operates within a wide input voltage range.

  6. Q: Does ISL6115AIBZ have any built-in delay for generating the reset signal? A: Yes, ISL6115AIBZ has a fixed delay of approximately 140ms before generating the reset signal.

  7. Q: Can ISL6115AIBZ be used in high-temperature environments? A: Yes, ISL6115AIBZ has a wide operating temperature range of -40°C to +125°C, making it suitable for high-temperature environments.

  8. Q: Is ISL6115AIBZ compatible with both active-low and active-high reset signals? A: Yes, ISL6115AIBZ supports both active-low and active-high reset signal outputs.

  9. Q: Can multiple ISL6115AIBZ devices be used in parallel for redundancy? A: Yes, multiple ISL6115AIBZ devices can be used in parallel to provide redundancy in critical applications.

  10. Q: What package does ISL6115AIBZ come in? A: ISL6115AIBZ is available in an 8-lead SOIC package.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements of ISL6115AIBZ.