Intersil
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
ISL61862HCRZ-T
Näytä Yksityiskohdat DataSheets

ISL61862HCRZ-T

Product Overview

Category

ISL61862HCRZ-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in power management applications.

Characteristics

  • High efficiency
  • Low quiescent current
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

ISL61862HCRZ-T is available in a compact and durable package, which ensures easy handling and reliable performance.

Essence

The essence of ISL61862HCRZ-T lies in its ability to efficiently regulate power in various electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Quiescent Current: 25µA
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: 10 Ld 3x3 DFN

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. PG: Power good pin
  6. SW: Switching node pin
  7. VOUT: Output voltage pin
  8. COMP: Compensation pin
  9. SS: Soft-start pin
  10. BST: Boost pin

Functional Features

  • Integrated synchronous buck converter
  • Adjustable output voltage through external resistors
  • Overcurrent protection prevents damage to the device and load
  • Thermal shutdown protection safeguards against overheating
  • Power good indicator for monitoring the output voltage status
  • Soft-start feature for smooth power-up

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows compatibility with various power sources
  • Adjustable output voltage provides flexibility in different applications
  • Overcurrent and thermal shutdown protection enhance device and load safety
  • Power good indicator enables easy monitoring of the output voltage status

Disadvantages

  • Limited availability of alternative models
  • Relatively high quiescent current compared to some competitors

Working Principles

ISL61862HCRZ-T operates as a synchronous buck converter, converting the input voltage to a regulated output voltage. The feedback pin (FB) is used to adjust the output voltage through external resistors. The enable pin (EN) controls the device's operation, while the power good pin (PG) indicates the status of the output voltage. The soft-start pin (SS) ensures a smooth power-up sequence. Overcurrent and thermal shutdown protection mechanisms safeguard the device and load from potential damage.

Detailed Application Field Plans

ISL61862HCRZ-T finds application in various fields, including but not limited to: 1. Portable electronic devices 2. Battery-powered systems 3. IoT devices 4. Industrial automation 5. Automotive electronics

Detailed and Complete Alternative Models

While ISL61862HCRZ-T is a reliable choice, there are alternative models available in the market that offer similar functionality. Some notable alternatives include: 1. TPS54332: Texas Instruments 2. LT8610: Analog Devices 3. MP2307: Monolithic Power Systems 4. MAX17503: Maxim Integrated

These alternative models provide comparable features and can be considered based on specific requirements and availability.

Word count: 536 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät ISL61862HCRZ-T :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of ISL61862HCRZ-T in technical solutions:

  1. Q: What is ISL61862HCRZ-T? A: ISL61862HCRZ-T is a high-speed, dual-channel MOSFET driver designed for driving two N-Channel power MOSFETs in synchronous buck or half-bridge topologies.

  2. Q: What is the maximum operating voltage of ISL61862HCRZ-T? A: The maximum operating voltage of ISL61862HCRZ-T is 18V.

  3. Q: What is the typical output current capability of ISL61862HCRZ-T? A: The typical output current capability of ISL61862HCRZ-T is ±4A.

  4. Q: Can ISL61862HCRZ-T be used in automotive applications? A: Yes, ISL61862HCRZ-T is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.

  5. Q: What is the purpose of the under-voltage lockout (UVLO) feature in ISL61862HCRZ-T? A: The UVLO feature ensures that the MOSFET driver remains off when the input voltage falls below a certain threshold, preventing improper operation.

  6. Q: Does ISL61862HCRZ-T have built-in shoot-through protection? A: Yes, ISL61862HCRZ-T incorporates shoot-through protection to prevent both MOSFETs from conducting simultaneously, reducing power loss and improving efficiency.

  7. Q: Can ISL61862HCRZ-T operate at high temperatures? A: Yes, ISL61862HCRZ-T has a wide operating temperature range of -40°C to +125°C, making it suitable for various industrial and automotive applications.

  8. Q: What is the typical propagation delay of ISL61862HCRZ-T? A: The typical propagation delay of ISL61862HCRZ-T is 30ns, ensuring fast switching performance.

  9. Q: Does ISL61862HCRZ-T have an enable pin? A: Yes, ISL61862HCRZ-T features an active-low enable pin that can be used to turn on/off the MOSFET driver.

  10. Q: Can ISL61862HCRZ-T be used in high-frequency applications? A: Yes, ISL61862HCRZ-T is designed for high-speed operation and can be used in applications with switching frequencies up to several hundred kilohertz.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.