Intersil
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
ISL62392CIRTZ
Näytä Yksityiskohdat DataSheets

ISL62392CIRTZ - English Editing Encyclopedia Entry

Product Overview

Category

ISL62392CIRTZ belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management purposes.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size

Package

ISL62392CIRTZ is available in a small package, suitable for surface mount technology (SMT) applications.

Essence

The essence of ISL62392CIRTZ lies in its ability to efficiently manage power within electronic devices, ensuring optimal performance and reliability.

Packaging/Quantity

ISL62392CIRTZ is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.4V
  • Maximum Output Current: 3A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL62392CIRTZ features the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. PGND: Power ground pin
  7. BST: Boost pin
  8. LX: Inductor connection pin

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • High efficiency ensures minimal power loss during operation.
  • Enable pin provides control over the device's power state.
  • Feedback pin enables voltage regulation and stability.
  • Boost pin enhances the output voltage when required.

Advantages and Disadvantages

Advantages

  • High efficiency leads to improved power utilization.
  • Compact size allows for integration into space-constrained devices.
  • Wide input voltage range enhances compatibility.
  • Enable pin provides flexibility in power management.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

ISL62392CIRTZ operates based on a switching regulator topology. It utilizes an internal control loop to regulate the output voltage by adjusting the duty cycle of the internal power switch. This enables efficient power conversion and voltage regulation.

Detailed Application Field Plans

ISL62392CIRTZ finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. ISL62392CIRTZ-T: Similar to ISL62392CIRTZ with minor variations in specifications.
  2. ISL62392CIRTZ-EVALZ: Evaluation board for ISL62392CIRTZ, facilitating testing and development.

These alternative models provide similar functionality and can be considered as alternatives to ISL62392CIRTZ.

In conclusion, ISL62392CIRTZ is a highly efficient integrated circuit used for power management in electronic devices. Its compact size, wide input voltage range, and flexible control features make it suitable for various applications. However, its limited maximum output current and operating temperature range should be considered when selecting this product for specific use cases.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät ISL62392CIRTZ :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of ISL62392CIRTZ in technical solutions:

  1. Q: What is ISL62392CIRTZ? A: ISL62392CIRTZ is a highly integrated battery charger controller IC designed for portable applications.

  2. Q: What are the key features of ISL62392CIRTZ? A: Some key features include high efficiency, programmable charging current, thermal regulation, and overvoltage protection.

  3. Q: What is the typical input voltage range for ISL62392CIRTZ? A: The typical input voltage range is from 4.5V to 28V.

  4. Q: Can ISL62392CIRTZ charge multiple battery chemistries? A: Yes, ISL62392CIRTZ supports various battery chemistries such as Li-ion, Li-polymer, and LiFePO4.

  5. Q: Does ISL62392CIRTZ have built-in safety features? A: Yes, it has built-in safety features like overcurrent protection, short-circuit protection, and thermal shutdown.

  6. Q: What is the maximum charging current that ISL62392CIRTZ can provide? A: The maximum charging current is programmable and can go up to 4A.

  7. Q: Can ISL62392CIRTZ operate in a wide temperature range? A: Yes, it can operate in a temperature range of -40°C to +85°C.

  8. Q: Is ISL62392CIRTZ suitable for fast charging applications? A: Yes, ISL62392CIRTZ supports fast charging with its high charging current capability.

  9. Q: Does ISL62392CIRTZ have any external components requirements? A: Yes, it requires a few external components like resistors, capacitors, and an inductor for proper operation.

  10. Q: What are some typical applications of ISL62392CIRTZ? A: Some typical applications include smartphones, tablets, portable medical devices, and other battery-powered devices.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.