Intersil
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
ISL6596CBZ-T
Näytä Yksityiskohdat DataSheets

ISL6596CBZ-T

Product Overview

Category

ISL6596CBZ-T belongs to the category of integrated circuits (ICs).

Use

The ISL6596CBZ-T is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size

Package

ISL6596CBZ-T is available in a compact package, which ensures easy integration into various electronic devices.

Essence

The essence of ISL6596CBZ-T lies in its ability to efficiently manage power in electronic systems, ensuring optimal performance and reliability.

Packaging/Quantity

ISL6596CBZ-T is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 25V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 10A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ISL6596CBZ-T features the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VCC: Supply voltage pin
  4. FB: Feedback pin
  5. COMP: Compensation pin
  6. RT: Timing resistor pin
  7. CT: Timing capacitor pin
  8. BOOT: Bootstrap pin
  9. PHASE: Phase node pin
  10. LX: Switching node pin

Functional Features

  • Wide input voltage range for versatile applications
  • High output current capability for powering various loads
  • Adjustable output voltage for flexibility
  • Efficient switching frequency for improved power management
  • Comprehensive protection features for enhanced reliability

Advantages and Disadvantages

Advantages

  • High efficiency leading to reduced power consumption
  • Compact size for space-constrained applications
  • Versatile input and output voltage ranges for compatibility with different systems
  • Comprehensive protection features ensure system reliability

Disadvantages

  • Limited maximum output current compared to some other models
  • Requires careful consideration of external components for optimal performance

Working Principles

The ISL6596CBZ-T operates based on a pulse-width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the switching signal. This allows for efficient power transfer from the input to the output, minimizing losses and maximizing overall system efficiency.

Detailed Application Field Plans

The ISL6596CBZ-T finds application in various fields, including but not limited to: 1. Power supplies for computer systems 2. Industrial automation equipment 3. Telecommunications infrastructure 4. Automotive electronics 5. Renewable energy systems

Detailed and Complete Alternative Models

  1. ISL6596CAZ-T: Similar functionality with minor variations in specifications.
  2. ISL6596CBZ: Non-temperature range version of ISL6596CBZ-T.
  3. ISL6596CBZ-EVALZ: Evaluation board for testing and prototyping purposes.

These alternative models provide similar power management capabilities and can be considered as substitutes for ISL6596CBZ-T depending on specific requirements.

Word count: 413

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät ISL6596CBZ-T :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of ISL6596CBZ-T in technical solutions:

  1. Q: What is ISL6596CBZ-T? A: ISL6596CBZ-T is a high-performance, dual-output synchronous buck controller IC designed for use in various power supply applications.

  2. Q: What is the input voltage range supported by ISL6596CBZ-T? A: The input voltage range supported by ISL6596CBZ-T is typically between 4.5V and 25V.

  3. Q: What is the output voltage range that can be achieved using ISL6596CBZ-T? A: The output voltage range that can be achieved using ISL6596CBZ-T depends on the external components used, but it can typically range from 0.8V to 5.5V.

  4. Q: Can ISL6596CBZ-T support multiple outputs? A: Yes, ISL6596CBZ-T is a dual-output controller, which means it can support two independent output voltages.

  5. Q: What is the maximum switching frequency supported by ISL6596CBZ-T? A: The maximum switching frequency supported by ISL6596CBZ-T is typically around 1MHz.

  6. Q: Does ISL6596CBZ-T have any built-in protection features? A: Yes, ISL6596CBZ-T includes various protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  7. Q: Can ISL6596CBZ-T operate in a wide temperature range? A: Yes, ISL6596CBZ-T is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  8. Q: What type of control method does ISL6596CBZ-T use? A: ISL6596CBZ-T uses voltage mode control for regulating the output voltages.

  9. Q: Can ISL6596CBZ-T be used in both step-up and step-down applications? A: No, ISL6596CBZ-T is specifically designed for step-down (buck) applications.

  10. Q: Are there any evaluation boards or reference designs available for ISL6596CBZ-T? A: Yes, Intersil provides evaluation boards and reference designs that can help users quickly prototype and implement solutions using ISL6596CBZ-T.

Please note that the answers provided here are general and may vary depending on specific application requirements and design considerations. It is always recommended to refer to the datasheet and application notes for detailed information and guidelines.