Intersil
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
ISL6612AIR
Näytä Yksityiskohdat DataSheets

ISL6612AIR

Product Overview

Category

ISL6612AIR belongs to the category of integrated circuits (ICs).

Use

This product is primarily used for power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact package size

Package

ISL6612AIR is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL6612AIR lies in its ability to efficiently manage power in various applications.

Packaging/Quantity

ISL6612AIR is typically packaged in reels and is available in quantities of 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.6V to 5.5V
  • Maximum Continuous Output Current: 12A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL6612AIR features the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin
  4. COMP: Compensation pin
  5. EN: Enable pin
  6. VCC: Supply voltage pin
  7. PGND: Power ground pin
  8. LX: Switching node pin

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency ensures minimal power loss
  • Adjustable output voltage provides flexibility
  • Overcurrent protection safeguards against excessive current flow
  • Thermal shutdown protection prevents overheating

Advantages and Disadvantages

Advantages

  • High efficiency leads to energy savings
  • Compact package size enables space-saving designs
  • Wide input voltage range enhances compatibility
  • Overcurrent and thermal protection ensure system reliability

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Higher cost compared to some alternative models

Working Principles

ISL6612AIR operates based on a pulse-width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the switching signal. This allows for efficient power management and voltage regulation.

Detailed Application Field Plans

ISL6612AIR finds application in various fields, including but not limited to: 1. Power supplies for computer systems 2. Industrial automation equipment 3. Telecommunications infrastructure 4. Automotive electronics 5. LED lighting systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL6612AIR include: 1. LM2596: A popular buck converter IC with adjustable output voltage. 2. LT8610: A high-efficiency synchronous buck regulator with a wide input voltage range. 3. TPS54360: A compact step-down converter with integrated power MOSFETs.

These alternative models can be considered based on specific requirements and design constraints.

Word count: 345 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät ISL6612AIR :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of ISL6612AIR in technical solutions:

  1. Q: What is ISL6612AIR? A: ISL6612AIR is a high-performance dual synchronous buck controller IC used for voltage regulation in various technical applications.

  2. Q: What is the input voltage range supported by ISL6612AIR? A: ISL6612AIR supports an input voltage range of 4.5V to 14V.

  3. Q: What is the output voltage range that can be achieved using ISL6612AIR? A: The output voltage range achievable with ISL6612AIR depends on the external components used, but typically it can support output voltages from 0.6V to 5.5V.

  4. Q: What is the maximum output current that ISL6612AIR can handle? A: ISL6612AIR can handle a maximum output current of up to 20A.

  5. Q: Can ISL6612AIR operate in a synchronous rectification mode? A: Yes, ISL6612AIR can operate in both synchronous rectification and non-synchronous rectification modes.

  6. Q: Does ISL6612AIR have any built-in protection features? A: Yes, ISL6612AIR has built-in protection features such as overcurrent protection (OCP), overvoltage protection (OVP), and thermal shutdown.

  7. Q: What is the switching frequency range of ISL6612AIR? A: The switching frequency range of ISL6612AIR is typically between 200kHz and 600kHz.

  8. Q: Can ISL6612AIR be used in automotive applications? A: Yes, ISL6612AIR is suitable for automotive applications as it meets the AEC-Q100 standard and has a wide operating temperature range.

  9. Q: What type of control loop does ISL6612AIR use? A: ISL6612AIR uses a voltage mode control loop.

  10. Q: Are there any evaluation boards or reference designs available for ISL6612AIR? A: Yes, Intersil (now Renesas Electronics) provides evaluation boards and reference designs for ISL6612AIR to help with the development and testing process.

Please note that these answers are general and may vary depending on specific application requirements and design considerations.