Intersil
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
ISL89164FRTCZ
Näytä Yksityiskohdat DataSheets

ISL89164FRTCZ

Product Overview

Category

ISL89164FRTCZ belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management and control.

Characteristics

  • Integrated circuit
  • Power management and control functionality
  • High efficiency
  • Compact size

Package

ISL89164FRTCZ is available in a small form factor package, suitable for surface mount technology (SMT) assembly.

Essence

The essence of ISL89164FRTCZ lies in its ability to efficiently manage and control power in electronic devices, ensuring optimal performance and reliability.

Packaging/Quantity

This product is typically packaged in reels or trays, with a quantity of 2500 units per reel/tray.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Continuous Output Current: 1.5A
  • Switching Frequency: 1.5MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL89164FRTCZ features a compact pin configuration with the following pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SW: Switching node pin
  6. PG: Power good indicator pin
  7. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • High switching frequency enables efficient power conversion.
  • Enable pin provides control over the device's operation.
  • Power good indicator pin ensures proper power delivery.
  • Feedback pin allows for voltage regulation.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Compact size enables integration into space-constrained designs.
  • Wide input voltage range enhances versatility.
  • Power good indicator ensures reliable power delivery.

Disadvantages

  • Limited maximum continuous output current may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

ISL89164FRTCZ operates based on a switching regulator topology. It utilizes high-frequency switching to efficiently convert the input voltage to the desired output voltage. The device incorporates control circuitry to regulate the output voltage and provide protection features such as overcurrent and overtemperature protection.

Detailed Application Field Plans

ISL89164FRTCZ finds application in various electronic devices, including but not limited to: 1. Mobile phones 2. Tablets 3. Portable media players 4. Wearable devices 5. IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL89164FRTCZ include: 1. LT8610ABEMSE#PBF by Analog Devices Inc. 2. TPS54332DDAR by Texas Instruments 3. MAX17503GTL+T by Maxim Integrated

These alternative models can be considered based on specific requirements and design constraints.

Word count: 408 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät ISL89164FRTCZ :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of ISL89164FRTCZ in technical solutions:

  1. Q: What is ISL89164FRTCZ? A: ISL89164FRTCZ is a high-performance, low-side load switch designed for use in various technical solutions.

  2. Q: What are the key features of ISL89164FRTCZ? A: Some key features include low RDS(ON), wide input voltage range, overcurrent protection, thermal shutdown, and fault reporting.

  3. Q: What is the typical application of ISL89164FRTCZ? A: It is commonly used in power distribution systems, battery-powered devices, USB ports, and other applications where load switching is required.

  4. Q: What is the maximum load current that ISL89164FRTCZ can handle? A: The maximum load current is typically around 2A, but it can vary depending on the specific operating conditions.

  5. Q: Can ISL89164FRTCZ operate with different input voltages? A: Yes, it has a wide input voltage range of 1.8V to 5.5V, making it compatible with various power supply configurations.

  6. Q: Does ISL89164FRTCZ have built-in protection features? A: Yes, it includes overcurrent protection, thermal shutdown, and fault reporting to ensure safe operation and prevent damage to the load.

  7. Q: How does the fault reporting feature work in ISL89164FRTCZ? A: The fault reporting pin provides an indication when an overcurrent or thermal shutdown event occurs, allowing for system-level diagnostics.

  8. Q: Can ISL89164FRTCZ be used in battery-powered devices? A: Yes, it is suitable for battery-powered applications due to its low quiescent current and efficient power management capabilities.

  9. Q: Is there any specific layout or thermal considerations for ISL89164FRTCZ? A: Yes, it is recommended to follow the layout guidelines provided in the datasheet to ensure proper thermal dissipation and minimize parasitic effects.

  10. Q: Where can I find more information about ISL89164FRTCZ? A: You can refer to the datasheet and application notes available on the manufacturer's website for detailed information on the device's specifications, usage, and design considerations.

Please note that the answers provided here are general and may vary depending on the specific requirements and implementation of ISL89164FRTCZ in different technical solutions.