Intersil
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
ISL9205AIRZ
Näytä Yksityiskohdat DataSheets

ISL9205AIRZ

Product Overview

Category

ISL9205AIRZ belongs to the category of integrated circuits (ICs).

Use

The ISL9205AIRZ is commonly used as a power management IC for portable devices, such as smartphones, tablets, and wearable devices.

Characteristics

  • High efficiency power conversion
  • Low quiescent current
  • Wide input voltage range
  • Multiple output voltage options
  • Overcurrent and overvoltage protection
  • Thermal shutdown protection

Package

ISL9205AIRZ is available in a small outline package (SOP) with 16 pins.

Essence

The essence of ISL9205AIRZ lies in its ability to efficiently manage power supply for portable electronic devices, ensuring stable and reliable operation.

Packaging/Quantity

ISL9205AIRZ is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V - 5.5V
  • Output Voltage Range: 1.2V - 3.3V
  • Quiescent Current: 50µA
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ISL9205AIRZ has the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. EN: Enable pin
  4. VOUT1: Output voltage 1
  5. VOUT2: Output voltage 2
  6. VOUT3: Output voltage 3
  7. FB1: Feedback pin 1
  8. FB2: Feedback pin 2
  9. FB3: Feedback pin 3
  10. PGND: Power ground
  11. BST: Boost pin
  12. SW: Switch pin
  13. SS: Soft-start pin
  14. PG: Power good indicator
  15. VCC: Supply voltage
  16. NC: No connection

Functional Features

  • Power supply sequencing
  • Dynamic voltage scaling
  • Overcurrent and overvoltage protection
  • Thermal shutdown protection
  • Soft-start for smooth power-up
  • Power good indicator for system monitoring

Advantages and Disadvantages

Advantages

  • High efficiency power conversion
  • Wide input voltage range
  • Multiple output voltage options
  • Overcurrent and overvoltage protection
  • Thermal shutdown protection

Disadvantages

  • Limited number of output voltage options
  • Relatively high quiescent current compared to some alternatives

Working Principles

The ISL9205AIRZ operates by converting the input voltage to multiple regulated output voltages using a combination of boost and buck converters. It employs various control mechanisms to ensure efficient power delivery while protecting the system from overcurrent, overvoltage, and thermal issues.

Detailed Application Field Plans

ISL9205AIRZ is widely used in portable electronic devices, including but not limited to: - Smartphones - Tablets - Wearable devices - Portable gaming consoles - Portable medical devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL9205AIRZ are: - LTC3557 - TPS65217 - MAX77650

These models offer similar functionality and features, providing options for designers based on specific requirements.

Word count: 411 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät ISL9205AIRZ :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of ISL9205AIRZ in technical solutions:

  1. Q: What is ISL9205AIRZ? A: ISL9205AIRZ is a highly integrated, low-power, single-cell Li-ion/Li-polymer battery charger IC.

  2. Q: What is the input voltage range for ISL9205AIRZ? A: The input voltage range for ISL9205AIRZ is typically between 4.35V and 6.5V.

  3. Q: What is the maximum charging current supported by ISL9205AIRZ? A: ISL9205AIRZ supports a maximum charging current of up to 1A.

  4. Q: Can ISL9205AIRZ charge multiple cells in series? A: No, ISL9205AIRZ is designed to charge a single-cell Li-ion/Li-polymer battery only.

  5. Q: Does ISL9205AIRZ have overvoltage protection? A: Yes, ISL9205AIRZ has built-in overvoltage protection to prevent damage to the battery during charging.

  6. Q: Is ISL9205AIRZ compatible with USB power sources? A: Yes, ISL9205AIRZ can be powered from a USB port or any other 5V power source.

  7. Q: Does ISL9205AIRZ support thermal regulation? A: Yes, ISL9205AIRZ features thermal regulation to prevent overheating during charging.

  8. Q: Can ISL9205AIRZ operate in a wide temperature range? A: Yes, ISL9205AIRZ is designed to operate in a temperature range of -40°C to +85°C.

  9. Q: Does ISL9205AIRZ have a charge status indication feature? A: Yes, ISL9205AIRZ provides a charge status indication through an LED or GPIO pin.

  10. Q: Is ISL9205AIRZ suitable for portable devices like smartphones and tablets? A: Yes, ISL9205AIRZ is commonly used in portable devices to provide efficient and reliable battery charging.

Please note that these answers are general and may vary depending on the specific implementation and datasheet of ISL9205AIRZ.