Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
IS25LP128-JGLE-TR

IS25LP128-JGLE-TR

Product Overview

Category

IS25LP128-JGLE-TR belongs to the category of Serial NOR Flash Memory.

Use

This product is primarily used for storing and retrieving data in electronic devices such as computers, smartphones, tablets, and other consumer electronics.

Characteristics

  • High-speed data transfer
  • Non-volatile memory
  • Low power consumption
  • Compact package size
  • Wide operating temperature range

Package

IS25LP128-JGLE-TR is available in a small form factor package, making it suitable for space-constrained applications. The package type is JGLE and it is surface mountable.

Essence

The essence of IS25LP128-JGLE-TR lies in its ability to provide reliable and fast non-volatile memory storage for various electronic devices.

Packaging/Quantity

IS25LP128-JGLE-TR is typically packaged in reels or trays, depending on the manufacturer's specifications. The quantity per reel or tray may vary but is usually in the range of several hundred to a few thousand units.

Specifications

  • Memory Size: 128 Megabits (16 Megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Transfer Rate: Up to 133 MHz
  • Erase/Program Time: Typically less than 4 seconds
  • Endurance: 100,000 Program/Erase cycles
  • Data Retention: Up to 20 years

Detailed Pin Configuration

The IS25LP128-JGLE-TR has a total of 8 pins:

  1. Chip Select (/CS) - Used to enable or disable the device.
  2. Serial Clock (SCLK) - Provides the clock signal for data transfer.
  3. Serial Data Input (SI) - Used to input data into the device.
  4. Serial Data Output (SO) - Outputs data from the device.
  5. Hold (/HOLD) - Allows external devices to pause the data transfer.
  6. Write Protect (/WP) - Enables or disables write operations.
  7. Ground (GND) - Connected to the ground reference.
  8. Power Supply (VCC) - Connected to the power source.

Functional Features

  • High-speed read and write operations
  • Flexible erase options (sector, block, or chip erase)
  • Software and hardware protection mechanisms
  • Low power consumption in standby mode
  • Fast program and erase times
  • Reliable data retention

Advantages and Disadvantages

Advantages

  • High-speed data transfer allows for quick access to stored information.
  • Non-volatile memory ensures data integrity even during power loss.
  • Low power consumption prolongs battery life in portable devices.
  • Compact package size enables integration into space-constrained designs.
  • Wide operating temperature range makes it suitable for various environments.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively higher cost per unit of storage compared to alternative solutions.
  • Limited endurance may require careful management of write operations.

Working Principles

IS25LP128-JGLE-TR utilizes the Serial Peripheral Interface (SPI) to communicate with the host device. It stores data in a series of memory cells that can be individually programmed or erased. The SPI interface allows for high-speed data transfer between the host and the memory device.

When data is written, the memory cells are programmed by applying electrical charges to specific locations within the memory array. Erasing data involves removing these charges from the memory cells. The device's internal controller manages these operations and ensures data integrity.

Detailed Application Field Plans

IS25LP128-JGLE-TR finds applications in various electronic devices, including but not limited to: - Computers and laptops - Smartphones and tablets - Gaming consoles - Automotive electronics - Industrial control systems - Medical devices

Its high-speed data transfer, non-volatile memory, and compact package size make it suitable for these applications where reliable and fast storage is required.

Detailed and Complete Alternative Models

Some alternative models to IS25LP128-JGLE-TR include: - W25Q128JVSIQ (Winbond) - S25FL128SAGMFI011 (Cypress Semiconductor) - MX25L12835FM2I-10G (Macronix)

These models offer similar specifications and functionality, providing alternatives for designers and manufacturers based on specific requirements and preferences.

Word count: 530 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät IS25LP128-JGLE-TR :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of IS25LP128-JGLE-TR in technical solutions:

  1. Question: What is the capacity of the IS25LP128-JGLE-TR?
    Answer: The IS25LP128-JGLE-TR has a capacity of 128 megabits (16 megabytes).

  2. Question: What is the operating voltage range for this flash memory?
    Answer: The operating voltage range for the IS25LP128-JGLE-TR is 2.7V to 3.6V.

  3. Question: Can I use this flash memory in industrial applications?
    Answer: Yes, the IS25LP128-JGLE-TR is suitable for industrial applications due to its extended temperature range (-40°C to +85°C) and high reliability.

  4. Question: Does this flash memory support SPI interface?
    Answer: Yes, the IS25LP128-JGLE-TR supports the Serial Peripheral Interface (SPI) for easy integration into various systems.

  5. Question: What is the maximum clock frequency supported by this flash memory?
    Answer: The IS25LP128-JGLE-TR can operate at a maximum clock frequency of 104 MHz.

  6. Question: Is this flash memory compatible with 3.3V and 1.8V logic levels?
    Answer: Yes, the IS25LP128-JGLE-TR is compatible with both 3.3V and 1.8V logic levels, making it versatile for different system requirements.

  7. Question: Can I perform sector erase operations on this flash memory?
    Answer: Yes, the IS25LP128-JGLE-TR supports sector erase operations, allowing you to erase specific sectors of data.

  8. Question: Does this flash memory have a deep power-down mode?
    Answer: Yes, the IS25LP128-JGLE-TR features a deep power-down mode that reduces power consumption when the device is not in use.

  9. Question: What is the typical data retention period for this flash memory?
    Answer: The IS25LP128-JGLE-TR has a typical data retention period of 20 years, ensuring long-term reliability of stored data.

  10. Question: Can I use this flash memory in automotive applications?
    Answer: Yes, the IS25LP128-JGLE-TR is AEC-Q100 qualified, making it suitable for automotive applications that require high-quality and reliable components.

Please note that these answers are based on general information about the IS25LP128-JGLE-TR flash memory. For specific technical details and application requirements, it is recommended to refer to the datasheet or consult with the manufacturer.