IXYS
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
IXFN520N075T2
Näytä Yksityiskohdat DataSheets

IXFN520N075T2

Product Overview

Category

The IXFN520N075T2 belongs to the category of power MOSFETs.

Use

It is commonly used in power electronics applications such as motor control, power supplies, and inverters.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • High reliability

Package

The IXFN520N075T2 is typically available in a TO-268 package.

Essence

This power MOSFET is essential for efficient power management and control in various electronic systems.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Voltage Rating: 75V
  • Current Rating: 520A
  • On-Resistance: 1.5mΩ
  • Gate Charge: 300nC
  • Operating Temperature: -55°C to 175°C

Detailed Pin Configuration

The IXFN520N075T2 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • Low conduction losses
  • High efficiency
  • Enhanced thermal performance
  • Robustness against overcurrent and overvoltage conditions

Advantages and Disadvantages

Advantages

  • High current-carrying capability
  • Low on-resistance
  • Fast switching speed
  • Suitable for high-power applications

Disadvantages

  • Higher cost compared to standard MOSFETs
  • Requires careful thermal management due to high power dissipation

Working Principles

The IXFN520N075T2 operates based on the principles of field-effect transistors, utilizing the control of electric fields to modulate the conductivity of the semiconductor material.

Detailed Application Field Plans

The IXFN520N075T2 is well-suited for use in the following applications: - Electric vehicle powertrains - Industrial motor drives - Renewable energy systems - Uninterruptible power supplies (UPS) - High-power DC-DC converters

Detailed and Complete Alternative Models

Some alternative models to the IXFN520N075T2 include: - IXFN540N075T2 - IXFN530N075T2 - IXFN525N075T2

In conclusion, the IXFN520N075T2 power MOSFET offers high-performance characteristics suitable for demanding power electronics applications, providing efficient power management and control capabilities.

Word Count: 349

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät IXFN520N075T2 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the maximum voltage rating of IXFN520N075T2?

    • The maximum voltage rating of IXFN520N075T2 is 750V.

  2. What is the maximum current rating of IXFN520N075T2?

    • The maximum current rating of IXFN520N075T2 is 520A.

  3. What type of package does IXFN520N075T2 come in?

    • IXFN520N075T2 comes in a TO-264 package.

  4. What are the typical applications for IXFN520N075T2?

    • IXFN520N075T2 is commonly used in motor drives, inverters, and power supplies.

  5. What is the on-state voltage of IXFN520N075T2?

    • The on-state voltage of IXFN520N075T2 is typically around 1.7V.

  6. Does IXFN520N075T2 require a heat sink for operation?

    • Yes, IXFN520N075T2 typically requires a heat sink for efficient operation.

  7. What is the maximum junction temperature of IXFN520N075T2?

    • The maximum junction temperature of IXFN520N075T2 is 150°C.

  8. Is IXFN520N075T2 suitable for high-frequency switching applications?

    • Yes, IXFN520N075T2 is suitable for high-frequency switching applications.

  9. What is the gate threshold voltage of IXFN520N075T2?

    • The gate threshold voltage of IXFN520N075T2 is typically around 4V.

  10. Can IXFN520N075T2 be used in parallel to increase current handling capability?

    • Yes, IXFN520N075T2 can be used in parallel to increase current handling capability. However, proper attention should be given to current sharing and thermal management.