LT1460FCMS8-5#PBF
Product Overview
Category
The LT1460FCMS8-5#PBF belongs to the category of voltage references.
Use
It is primarily used as a precision reference voltage source in various electronic circuits.
Characteristics
- High accuracy and stability
- Low temperature coefficient
- Low output noise
- Wide operating temperature range
- Small package size
Package
The LT1460FCMS8-5#PBF comes in an MSOP-8 package, which is a small surface-mount package with 8 pins.
Essence
The essence of LT1460FCMS8-5#PBF lies in its ability to provide a precise and stable reference voltage for accurate circuit operation.
Packaging/Quantity
The product is typically available in tape and reel packaging, with a quantity of 250 units per reel.
Specifications
- Output Voltage: 5.000V
- Initial Accuracy: ±0.05%
- Temperature Coefficient: 10ppm/°C
- Output Noise Voltage: 1.2μVrms (10Hz to 100kHz)
- Operating Temperature Range: -40°C to 125°C
- Supply Voltage Range: 2.7V to 36V
- Quiescent Current: 50μA
Detailed Pin Configuration
The LT1460FCMS8-5#PBF has the following pin configuration:
```
| | --| VOUT | --| GND | --| TRIM | --| NC | --| NC | --| NC | --| VIN | |___________| ```
Functional Features
- Precise and stable output voltage
- Low temperature coefficient ensures minimal drift over temperature variations
- Low output noise for accurate signal processing
- Wide operating temperature range allows for use in various environments
- Small package size enables space-saving designs
Advantages and Disadvantages
Advantages
- High accuracy and stability
- Low output noise
- Wide operating temperature range
- Small package size
Disadvantages
- Limited supply voltage range (2.7V to 36V)
- Requires external trimming for precise voltage adjustment
Working Principles
The LT1460FCMS8-5#PBF utilizes a bandgap reference circuit to generate a stable voltage reference. It compensates for temperature variations by employing a combination of bipolar and CMOS technologies, resulting in a low temperature coefficient. The output voltage is trimmed during manufacturing to achieve the desired accuracy.
Detailed Application Field Plans
The LT1460FCMS8-5#PBF finds applications in various fields, including:
- Precision analog-to-digital converters (ADCs)
- Voltage regulators
- Data acquisition systems
- Test and measurement equipment
- Industrial control systems
- Medical devices
Detailed and Complete Alternative Models
- LT1236ACS8-5#PBF: Similar voltage reference with an initial accuracy of ±0.05% and a temperature coefficient of 10ppm/°C.
- MAX6190AESA+: Precision voltage reference with an initial accuracy of ±0.04% and a temperature coefficient of 15ppm/°C.
- REF5050AIDGKT: High-precision voltage reference with an initial accuracy of ±0.02% and a temperature coefficient of 3ppm/°C.
These alternative models offer similar functionality and can be considered as substitutes for the LT1460FCMS8-5#PBF.
Word count: 457 words
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät LT1460FCMS8-5#PBF :n soveltamiseen teknisissä ratkaisuissa
Sure! Here are 10 common questions and answers related to the application of LT1460FCMS8-5#PBF in technical solutions:
Question: What is the LT1460FCMS8-5#PBF?
Answer: The LT1460FCMS8-5#PBF is a precision voltage reference IC manufactured by Linear Technology (now part of Analog Devices). It provides a stable and accurate 5V output voltage.Question: What is the typical application of the LT1460FCMS8-5#PBF?
Answer: The LT1460FCMS8-5#PBF is commonly used as a voltage reference in various electronic systems, such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), power supplies, and sensor interfaces.Question: What is the voltage accuracy of the LT1460FCMS8-5#PBF?
Answer: The LT1460FCMS8-5#PBF has a voltage accuracy of ±0.05% at room temperature, which ensures precise and reliable voltage references in applications.Question: What is the temperature coefficient of the LT1460FCMS8-5#PBF?
Answer: The LT1460FCMS8-5#PBF has a low temperature coefficient of 10ppm/°C, meaning that its output voltage remains stable even with changes in temperature.Question: Can the LT1460FCMS8-5#PBF operate from a single supply voltage?
Answer: Yes, the LT1460FCMS8-5#PBF can operate from a single supply voltage ranging from 4.5V to 36V, making it suitable for a wide range of applications.Question: Does the LT1460FCMS8-5#PBF require external components for operation?
Answer: No, the LT1460FCMS8-5#PBF is a complete voltage reference that does not require any external components. It has built-in precision resistors and temperature compensation.Question: What is the output current capability of the LT1460FCMS8-5#PBF?
Answer: The LT1460FCMS8-5#PBF can provide an output current of up to 10mA, which is sufficient for most voltage reference applications.Question: Is the LT1460FCMS8-5#PBF available in different package options?
Answer: Yes, the LT1460FCMS8-5#PBF is available in an 8-pin MSOP (Mini Small Outline Package) package, which is compact and suitable for space-constrained designs.Question: Can the LT1460FCMS8-5#PBF operate in harsh environments?
Answer: Yes, the LT1460FCMS8-5#PBF is designed to operate in industrial temperature ranges (-40°C to +85°C) and is suitable for use in various rugged applications.Question: Are there any application notes or reference designs available for the LT1460FCMS8-5#PBF?
Answer: Yes, Analog Devices provides application notes and reference designs on their website that can help users understand and implement the LT1460FCMS8-5#PBF in their technical solutions effectively.
Please note that the answers provided here are general and may vary depending on specific requirements and use cases.