Linear Technology/Analog Devices
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
LT4356CMS-3#PBF
Näytä Yksityiskohdat DataSheets

LT4356CMS-3#PBF

Product Category

The LT4356CMS-3#PBF belongs to the category of power management integrated circuits (PMICs).

Basic Information Overview

  • Use: The LT4356CMS-3#PBF is used for overvoltage and reverse voltage protection in various electronic systems.
  • Characteristics: It features low quiescent current, wide input voltage range, and adjustable overvoltage protection threshold.
  • Package: The LT4356CMS-3#PBF is available in a 10-lead MSOP package.
  • Essence: Its essence lies in providing robust protection for sensitive electronic components.
  • Packaging/Quantity: It is typically available in reels with a quantity of 2500 units.

Specifications

  • Input Voltage Range: 4V to 80V
  • Quiescent Current: 1.2mA
  • Overvoltage Protection Threshold: Adjustable from 5.5V to 80V
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LT4356CMS-3#PBF has 10 pins: 1. VIN: Input Voltage 2. GATE: Gate Drive Output 3. SOURCE: Source Connection 4. FB: Feedback Pin 5. UVLO: Undervoltage Lockout 6. OVLO: Overvoltage Lockout 7. GND: Ground 8. VOUT: Output Voltage 9. SET: Overvoltage Threshold Set 10. SS: Soft-Start Capacitor Connection

Functional Features

  • Overvoltage and Reverse Voltage Protection
  • Wide Input Voltage Range
  • Low Quiescent Current
  • Adjustable Overvoltage Protection Threshold
  • Soft-Start Functionality

Advantages and Disadvantages

Advantages: - Robust protection for sensitive electronics - Wide input voltage range - Low quiescent current

Disadvantages: - Limited to 80V maximum input voltage - Requires external components for full functionality

Working Principles

The LT4356CMS-3#PBF operates by monitoring the input voltage and providing a controlled gate drive output to protect downstream electronics from overvoltage and reverse voltage conditions. It utilizes an adjustable overvoltage protection threshold to suit various application requirements.

Detailed Application Field Plans

The LT4356CMS-3#PBF is suitable for a wide range of applications including: - Automotive Electronics - Industrial Control Systems - Telecommunications Equipment - Power Distribution Systems

Detailed and Complete Alternative Models

Some alternative models to the LT4356CMS-3#PBF include: - LTC4366 - TPS25921 - MAX16054

This concludes the encyclopedia entry for the LT4356CMS-3#PBF, covering its product category, basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät LT4356CMS-3#PBF :n soveltamiseen teknisissä ratkaisuissa

  1. What is the LT4356CMS-3#PBF?

    • The LT4356CMS-3#PBF is a surge stopper with ideal diode controller designed to protect loads from high voltage transients.

  2. What is the input voltage range of LT4356CMS-3#PBF?

    • The input voltage range of LT4356CMS-3#PBF is 4V to 80V.

  3. What is the typical application of LT4356CMS-3#PBF?

    • The typical application of LT4356CMS-3#PBF is in automotive, industrial, and telecom systems where protection against high voltage transients is required.

  4. How does LT4356CMS-3#PBF protect against high voltage transients?

    • LT4356CMS-3#PBF protects against high voltage transients by limiting the output voltage to a safe level and providing reverse current protection.

  5. What is the maximum continuous output current of LT4356CMS-3#PBF?

    • The maximum continuous output current of LT4356CMS-3#PBF is 3A.

  6. Can LT4356CMS-3#PBF be used in battery-powered applications?

    • Yes, LT4356CMS-3#PBF can be used in battery-powered applications to protect the load from overvoltage conditions.

  7. What are the key features of LT4356CMS-3#PBF?

    • The key features of LT4356CMS-3#PBF include wide input voltage range, adjustable output voltage clamp, and reverse current protection.

  8. Is LT4356CMS-3#PBF suitable for harsh environments?

    • Yes, LT4356CMS-3#PBF is suitable for harsh environments as it is designed to operate in industrial and automotive applications.

  9. What are the recommended external components for LT4356CMS-3#PBF?

    • The recommended external components for LT4356CMS-3#PBF include an external N-channel MOSFET, resistors, and capacitors.

  10. Where can I find the detailed datasheet and application notes for LT4356CMS-3#PBF?

    • The detailed datasheet and application notes for LT4356CMS-3#PBF can be found on the manufacturer's website or distributor's resources.