Linear Technology/Analog Devices
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
LTC4226IUD-1#TRPBF
Näytä Yksityiskohdat DataSheets

LTC4226IUD-1#TRPBF

Product Overview

Category

The LTC4226IUD-1#TRPBF belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for power management and protection applications.

Characteristics

  • The LTC4226IUD-1#TRPBF is a high-performance power path controller.
  • It provides protection against reverse voltage, overcurrent, and overvoltage conditions.
  • This IC offers low quiescent current and high efficiency.
  • It operates over a wide input voltage range.

Package

The LTC4226IUD-1#TRPBF is available in a 16-lead QFN package.

Essence

The essence of this product lies in its ability to efficiently manage and protect power sources in various applications.

Packaging/Quantity

The LTC4226IUD-1#TRPBF is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Quiescent Current: 30µA (typical)
  • Overcurrent Threshold: Adjustable
  • Reverse Voltage Protection: Yes
  • Overvoltage Protection: Yes
  • Power Path Control: Yes
  • Fault Indicator: Yes

Detailed Pin Configuration

The LTC4226IUD-1#TRPBF has a total of 16 pins. Here is the detailed pin configuration:

  1. VIN1: Input Voltage 1
  2. VIN2: Input Voltage 2
  3. VOUT: Output Voltage
  4. GND: Ground
  5. FLT: Fault Indicator
  6. EN: Enable Pin
  7. OV: Overvoltage Threshold Adjustment
  8. OC: Overcurrent Threshold Adjustment
  9. SS1: Soft-Start 1
  10. SS2: Soft-Start 2
  11. PG: Power Good Indicator
  12. FB: Feedback Pin
  13. VCC: Supply Voltage
  14. FLT/EN: Fault Indicator/Enable Pin
  15. GATE1: Gate Drive Output 1
  16. GATE2: Gate Drive Output 2

Functional Features

The LTC4226IUD-1#TRPBF offers the following functional features:

  1. Power Path Control: It allows seamless switching between input power sources.
  2. Reverse Voltage Protection: Protects against reverse voltage conditions.
  3. Overvoltage Protection: Safeguards the system from excessive voltage levels.
  4. Overcurrent Protection: Prevents damage due to excessive current flow.
  5. Fault Indicator: Provides visual indication of any fault condition.
  6. Enable Pin: Allows control over the operation of the IC.

Advantages and Disadvantages

Advantages

  • Efficient power management and protection.
  • Wide input voltage range.
  • Adjustable overcurrent and overvoltage thresholds.
  • Low quiescent current.
  • Compact package size.

Disadvantages

  • Limited availability in certain regions.
  • Relatively higher cost compared to some alternatives.

Working Principles

The LTC4226IUD-1#TRPBF operates by continuously monitoring the input voltages and controlling the power path accordingly. It ensures that the load is always powered by the appropriate source, while providing protection against various fault conditions. The adjustable overcurrent and overvoltage thresholds allow customization based on specific application requirements.

Detailed Application Field Plans

The LTC4226IUD-1#TRPBF finds applications in a wide range of fields, including but not limited to: - Battery-powered devices - Portable electronics - Industrial automation - Automotive systems - Power distribution systems

Detailed and Complete Alternative Models

  1. LTC4226IUD-2#TRPBF: Similar to LTC4226IUD-1#TRPBF, but with different pin configuration.
  2. LTC4226IUD-3#TRPBF: Enhanced version with additional features for advanced power management.
  3. LTC4226IUD-4#TRPBF: Lower-cost variant with reduced functionality.

These alternative models offer similar functionality and can be considered based on specific requirements and cost considerations.

Word count: 520 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät LTC4226IUD-1#TRPBF :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of LTC4226IUD-1#TRPBF in technical solutions:

Q1: What is LTC4226IUD-1#TRPBF? A1: LTC4226IUD-1#TRPBF is a specific model number for a power management IC (integrated circuit) manufactured by Linear Technology (now part of Analog Devices). It is designed for hot-swappable applications and provides protection against reverse voltage, overcurrent, and overvoltage.

Q2: What are the key features of LTC4226IUD-1#TRPBF? A2: Some key features of LTC4226IUD-1#TRPBF include dual ideal diode controllers, adjustable current limit, reverse voltage protection, overvoltage protection, undervoltage lockout, and fault reporting.

Q3: How can LTC4226IUD-1#TRPBF be used in technical solutions? A3: LTC4226IUD-1#TRPBF can be used in various technical solutions where hot-swapping or protection against reverse voltage, overcurrent, and overvoltage is required. It is commonly used in applications such as redundant power supplies, battery backup systems, and load sharing circuits.

Q4: What is the maximum operating voltage of LTC4226IUD-1#TRPBF? A4: The maximum operating voltage of LTC4226IUD-1#TRPBF is typically around 80V.

Q5: Can LTC4226IUD-1#TRPBF handle high currents? A5: Yes, LTC4226IUD-1#TRPBF is designed to handle high currents. It has an adjustable current limit feature that allows users to set the desired current threshold.

Q6: Does LTC4226IUD-1#TRPBF have built-in fault reporting? A6: Yes, LTC4226IUD-1#TRPBF has built-in fault reporting. It provides status signals and fault indicators to notify the system about any detected faults or abnormal conditions.

Q7: Can LTC4226IUD-1#TRPBF be used in automotive applications? A7: Yes, LTC4226IUD-1#TRPBF is suitable for automotive applications. It meets the necessary automotive standards and can operate in harsh environments.

Q8: Is LTC4226IUD-1#TRPBF available in different package options? A8: Yes, LTC4226IUD-1#TRPBF is available in various package options, including the 16-lead QFN (Quad Flat No-Lead) package.

Q9: Are there any evaluation boards or reference designs available for LTC4226IUD-1#TRPBF? A9: Yes, Analog Devices provides evaluation boards and reference designs for LTC4226IUD-1#TRPBF, which can help users quickly prototype and test their applications.

Q10: Where can I find more information about LTC4226IUD-1#TRPBF? A10: You can find more detailed information about LTC4226IUD-1#TRPBF, including datasheets, application notes, and technical support, on the Analog Devices website or by contacting their customer support team.